Hi Felipe, On 03/06/2014 06:03 PM, Felipe Balbi wrote: > From: Roger Quadros <rogerq@xxxxxx> > > The dra7-usb2 and am437-usb2 bindings have not yet been used. > Change them to be more elegant. > > Acked-by: Kishon Vijay Abraham I <kishon@xxxxxx> > Signed-off-by: Roger Quadros <rogerq@xxxxxx> > Signed-off-by: Felipe Balbi <balbi@xxxxxx> > --- > > Here's updated patch with only Documentation. Tell me if it's ok to apply. > > Documentation/devicetree/bindings/phy/ti-phy.txt | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt > index 41dc132..8694aae 100644 > --- a/Documentation/devicetree/bindings/phy/ti-phy.txt > +++ b/Documentation/devicetree/bindings/phy/ti-phy.txt > @@ -9,9 +9,9 @@ Required properties: > e.g. USB2_PHY on OMAP5. > "ti,control-phy-pipe3" - if it has DPLL and individual Rx & Tx power control > e.g. USB3 PHY and SATA PHY on OMAP5. > - "ti,control-phy-dra7usb2" - if it has power down register like USB2 PHY on > + "ti,control-phy-dra7-usb2" - if it has power down register like USB2 PHY on > DRA7 platform. this needs to be "ti,control-phy-usb2-dra7" as it is easer to grep. I'll send a new series with updated patches for you and tony. cheers, -roger > - "ti,control-phy-am437usb2" - if it has power down register like USB2 PHY on > + "ti,control-phy-am437-usb2" - if it has power down register like USB2 PHY on > AM437 platform. > - reg : Address and length of the register set for the device. It contains > the address of "otghs_control" for control-phy-otghs or "power" register > -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
