The xHCI driver currently uses a USB core internal field, udev->lpm_capable, to indicate the xHCI driver knows how to calculate the LPM timeout values. If this value is set for the host controller udev, it means Link PM can be enabled for child devices under that host. Change the code so the xHCI driver isn't mucking with USB core internal fields. Instead, indicate the xHCI driver doesn't support Link PM on this host by clearing the U1 and U2 exit latencies in the roothub SuperSpeed Extended Capabilities BOS descriptor. The code to check for the roothub setting U1 and U2 exit latencies to zero will also disable LPM for external devices that do that same. This was already effectively done with commit ae8963adb4ad8c5f2a89ca1d99fb7bb721e7599f "usb: Don't enable LPM if the exit latency is zero." Leave that code in place, so that if a device sets one exit latency value to zero, but the other is set to a valid value, LPM is only enabled for the U1 or U2 state that had the valid value. This is the same behavior the code had before. Also, change messages about missing Link PM information from warning level to info level. Only print a warning about the first device that doesn't support LPM, to avoid log spam. Further, cleanup some unnecessary line breaks to help people to grep for the error messages. Signed-off-by: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx> Cc: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> --- drivers/usb/core/hub.c | 24 ++++++++++++++++-------- drivers/usb/host/xhci-hub.c | 8 +++++--- drivers/usb/host/xhci-pci.c | 6 ------ 3 files changed, 21 insertions(+), 17 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index f6c6b6f7cc9c..763c3134dd78 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -141,19 +141,27 @@ static int usb_device_supports_lpm(struct usb_device *udev) return 0; } - /* All USB 3.0 must support LPM, but we need their max exit latency - * information from the SuperSpeed Extended Capabilities BOS descriptor. + /* + * According to the USB 3.0 spec, all USB 3.0 devices must support LPM. + * However, there are some that don't, and they set the U1/U2 exit + * latencies to zero. */ if (!udev->bos->ss_cap) { - dev_warn(&udev->dev, "No LPM exit latency info found. " - "Power management will be impacted.\n"); + dev_info(&udev->dev, "No LPM exit latency info found, disabling LPM.\n"); return 0; } - if (udev->parent->lpm_capable) - return 1; - dev_warn(&udev->dev, "Parent hub missing LPM exit latency info. " - "Power management will be impacted.\n"); + if (udev->bos->ss_cap->bU1devExitLat == 0 && + udev->bos->ss_cap->bU2DevExitLat == 0) { + if (udev->parent) + dev_info(&udev->dev, "LPM exit latency is zeroed, disabling LPM.\n"); + else + dev_info(&udev->dev, "We don't know the algorithms for LPM for this host, disabling LPM.\n"); + return 0; + } + + if (!udev->parent || udev->parent->lpm_capable) + return 1; return 0; } diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 9992fbfec85f..1ad6bc1951c7 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -732,9 +732,11 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, /* Set the U1 and U2 exit latencies. */ memcpy(buf, &usb_bos_descriptor, USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE); - temp = readl(&xhci->cap_regs->hcs_params3); - buf[12] = HCS_U1_LATENCY(temp); - put_unaligned_le16(HCS_U2_LATENCY(temp), &buf[13]); + if ((xhci->quirks & XHCI_LPM_SUPPORT)) { + temp = readl(&xhci->cap_regs->hcs_params3); + buf[12] = HCS_U1_LATENCY(temp); + put_unaligned_le16(HCS_U2_LATENCY(temp), &buf[13]); + } /* Indicate whether the host has LTM support. */ temp = readl(&xhci->cap_regs->hcc_params); diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 04f986d9234f..6c03584ac15f 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -222,12 +222,6 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) goto put_usb3_hcd; /* Roothub already marked as USB 3.0 speed */ - /* We know the LPM timeout algorithms for this host, let the USB core - * enable and disable LPM for devices under the USB 3.0 roothub. - */ - if (xhci->quirks & XHCI_LPM_SUPPORT) - hcd_to_bus(xhci->shared_hcd)->root_hub->lpm_capable = 1; - return 0; put_usb3_hcd: -- 1.8.5.5 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html