Hi,
On Thursday 06 March 2014 03:54 PM, Kamil Debski wrote:
Hi Anton, Kishon,
From: Anton Tikhomirov [mailto:av.tikhomirov@xxxxxxxxxxx]
Sent: Thursday, March 06, 2014 9:26 AM
Hi Kamil,
...
+| 3. Supporting SoCs
++--------------------
+
+To support a new SoC a new file should be added to the drivers/phy
+directory. Each SoC's configuration is stored in an instance of the
+struct samsung_usb2_phy_config.
+
+struct samsung_usb2_phy_config {
+ const struct samsung_usb2_common_phy *phys;
+ unsigned int num_phys;
+ bool has_mode_switch;
You missed rate_to_clk here.
Thank you for spotting this.
Kishon: I am sorry that this omission was made. I am happy to send an
updated patchset. However, I want to give some time for any additional
comments. Do you think that we have for this? Is today evening ok with you?
Would be great if you can send the patch in 2-3 hrs.. I'd like to give
enough time for auto build to detect any errors.
+};
+
...
diff --git a/drivers/phy/phy-samsung-usb2.c b/drivers/phy/phy-
samsung-
usb2.c new file mode 100644 index 0000000..c3b7719
--- /dev/null
+++ b/drivers/phy/phy-samsung-usb2.c
@@ -0,0 +1,222 @@
+/*
+ * Samsung SoC USB 1.1/2.0 PHY driver
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ * Author: Kamil Debski <k.debski@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or
modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include "phy-samsung-usb2.h"
+
+static int samsung_usb2_phy_power_on(struct phy *phy) {
+ struct samsung_usb2_phy_instance *inst = phy_get_drvdata(phy);
+ struct samsung_usb2_phy_driver *drv = inst->drv;
+ int ret;
+
+ dev_dbg(drv->dev, "Request to power_on \"%s\" usb phy\n",
+ inst->cfg->label);
+ ret = clk_prepare_enable(drv->clk);
clk_prepare_enable() can sleep, and therefore doesn't allow
samusng_usb2_phy_power_on() to be used in atomic context (e.g. inside
spin_lock-ed area), what sometimes may be desirable.
What about to prepare clock in probe, and just enable it here
(note: clk_enable() doesn't sleep).
From the onward discussion between you and Kishon, I draw the conclusion
that this change is not necessary. Right?
right.
Cheers
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
