RE: [PATCH] usb: dwc2: Add function to calculate correct FIFO sizes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> From: dinguyen@xxxxxxxxxx [mailto:dinguyen@xxxxxxxxxx]
> Sent: Monday, March 03, 2014 2:20 PM
> 
> From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
> 
> The dwc2 IP on the SOCFPGA cannot use the default HW configured
> FIFO sizes. The total FIFO depth as read from GHWCFG3 reports 0x1f80 or 8064
> 32-bit words. But the GRXFSIZ, GNPTXFSIZ, and HPTXFSIZ register defaults
> to 0x2000 or 8192 32-bit words. So the driver cannot just use the fifo sizes
> as read from those registers.
> 
> For platforms that face the same issue, this commits sets the RX, periodic TX,
> and non-periodic TX fifo size to those that are recommended v2.93a spec for
> the DWC2 IP.
> 
> Signed-off-by: Dinh Nguyen <dinguyen@xxxxxxxxxx>
> Cc: Paul Zimmerman <paulz@xxxxxxxxxxxx>
> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
> ---
>  drivers/usb/dwc2/core.c |   41 +++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 41 insertions(+)
> 
> diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
> index 1d12988..e8e394c 100644
> --- a/drivers/usb/dwc2/core.c
> +++ b/drivers/usb/dwc2/core.c
> @@ -507,6 +507,44 @@ void dwc2_disable_host_interrupts(struct dwc2_hsotg *hsotg)
>  	writel(intmsk, hsotg->regs + GINTMSK);
>  }
> 
> +/*
> + * dwc2_calculate_dynamic_fifo() - Calculates the default fifo size
> + * For system that have a total fifo depth that is smaller than the default
> + * RX + TX fifo size.
> + *
> + * @hsotg: Programming view of DWC_otg controller
> + */
> +static void dwc2_calculate_dynamic_fifo(struct dwc2_hsotg *hsotg)
> +{
> +	struct dwc2_core_params *params = hsotg->core_params;
> +	struct dwc2_hw_params *hw = &hsotg->hw_params;
> +	u32 rxfsiz, nptxfsiz, ptxfsiz, total_fifo_size;
> +
> +	total_fifo_size = hw->total_fifo_size;
> +	rxfsiz = params->host_rx_fifo_size;
> +	nptxfsiz = params->host_nperio_tx_fifo_size;
> +	ptxfsiz = params->host_perio_tx_fifo_size;
> +
> +	if (total_fifo_size >= (rxfsiz + nptxfsiz + ptxfsiz))
> +		/* Params are valid, nothing to do */
> +		return;
> +	else {

Kernel style says both branches of the if() statement should have
parentheses here. (Checkpatch doesn't warn about that, I thought it
did.)

Other than that it looks OK. Once you fix the parentheses, you can add
my acked-by.

-- 
Paul

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux