xHCI driver has its own pci probe function that will call usb_hcd_pci_probe to register its usb-2 bus, and then continue to manually register the usb-3 bus. usb_hcd_pci_probe does a pm_runtime_put_noidle at the end and might thus trigger a runtime suspend before the usb-3 bus is ready. Prevent the runtime suspend by increasing the usage count in the beginning of xhci_pci_probe, and decrease it once the usb-3 bus is ready. xhci-platform driver is not using usb_hcd_pci_probe to set up busses and should not need to have it's usage count increased during probe. Signed-off-by: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx> Acked-by: Dan Williams <dan.j.williams@xxxxxxxxx> Acked-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> Signed-off-by: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx> Cc: stable@xxxxxxxxxxxxxxx --- drivers/usb/host/xhci-pci.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 04f986d..753857f 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -190,6 +190,10 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) struct usb_hcd *hcd; driver = (struct hc_driver *)id->driver_data; + + /* Prevent runtime suspending between USB-2 and USB-3 initialization */ + pm_runtime_get_noresume(&dev->dev); + /* Register the USB 2.0 roothub. * FIXME: USB core must know to register the USB 2.0 roothub first. * This is sort of silly, because we could just set the HCD driver flags @@ -199,7 +203,7 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) retval = usb_hcd_pci_probe(dev, id); if (retval) - return retval; + goto put_runtime_pm; /* USB 2.0 roothub is stored in the PCI device now. */ hcd = dev_get_drvdata(&dev->dev); @@ -228,12 +232,17 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) if (xhci->quirks & XHCI_LPM_SUPPORT) hcd_to_bus(xhci->shared_hcd)->root_hub->lpm_capable = 1; + /* USB-2 and USB-3 roothubs initialized, allow runtime pm suspend */ + pm_runtime_put_noidle(&dev->dev); + return 0; put_usb3_hcd: usb_put_hcd(xhci->shared_hcd); dealloc_usb2_hcd: usb_hcd_pci_remove(dev); +put_runtime_pm: + pm_runtime_put_noidle(&dev->dev); return retval; } -- 1.8.1.2 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
