ClearPortFeature(PORT_POWER) on a usb3 port places the port in either a
DSPORT.Powered-off-detect / DSPORT.Powered-off-reset loop, or the
DSPORT.Powered-off state. There is no way to ensure that RX
terminations will persist in this state, so it is possible a device will
degrade to its usb2 connection. Prevent this by blocking power-off of a
usb3 port while its usb2 peer is active, and powering on a usb3 port
before its usb2 peer.
Signed-off-by: Dan Williams <dan.j.williams@xxxxxxxxx>
---
drivers/usb/core/hub.c | 5 ---
drivers/usb/core/hub.h | 5 +++
drivers/usb/core/port.c | 72 +++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 77 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index c463c09c0d37..1c9ad4ff5c3c 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -36,11 +36,6 @@
#define USB_VENDOR_GENESYS_LOGIC 0x05e3
#define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND 0x01
-static inline int hub_is_superspeed(struct usb_device *hdev)
-{
- return (hdev->descriptor.bDeviceProtocol == USB_HUB_PR_SS);
-}
-
/* Protect struct usb_device->state and ->children members
* Note: Both are also protected by ->dev.sem, except that ->state can
* change to USB_STATE_NOTATTACHED even when the semaphore isn't held. */
diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
index 6858a55eceb5..45959767db8f 100644
--- a/drivers/usb/core/hub.h
+++ b/drivers/usb/core/hub.h
@@ -125,6 +125,11 @@ static inline bool hub_is_port_power_switchable(struct usb_hub *hub)
return (le16_to_cpu(hcs) & HUB_CHAR_LPSM) < HUB_CHAR_NO_LPSM;
}
+static inline int hub_is_superspeed(struct usb_device *hdev)
+{
+ return hdev->descriptor.bDeviceProtocol == USB_HUB_PR_SS;
+}
+
static inline int hub_port_debounce_be_connected(struct usb_hub *hub,
int port1)
{
diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c
index 783a3bc6c4c9..d06a64b16ac1 100644
--- a/drivers/usb/core/port.c
+++ b/drivers/usb/core/port.c
@@ -79,12 +79,20 @@ static int usb_port_runtime_resume(struct device *dev)
struct usb_device *hdev = to_usb_device(dev->parent->parent);
struct usb_interface *intf = to_usb_interface(dev->parent);
struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
+ struct usb_port *peer = port_dev->peer;
int port1 = port_dev->portnum;
int retval;
if (!hub)
return -EINVAL;
+ /*
+ * Power on our usb3 peer before this usb2 port to prevent a usb3
+ * device from degrading to its usb2 connection
+ */
+ if (!hub_is_superspeed(hdev) && peer)
+ pm_runtime_get_sync(&peer->dev);
+
usb_autopm_get_interface(intf);
set_bit(port1, hub->busy_bits);
@@ -106,6 +114,7 @@ static int usb_port_runtime_resume(struct device *dev)
clear_bit(port1, hub->busy_bits);
usb_autopm_put_interface(intf);
+
return retval;
}
@@ -115,6 +124,7 @@ static int usb_port_runtime_suspend(struct device *dev)
struct usb_device *hdev = to_usb_device(dev->parent->parent);
struct usb_interface *intf = to_usb_interface(dev->parent);
struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
+ struct usb_port *peer = port_dev->peer;
int port1 = port_dev->portnum;
int retval;
@@ -132,6 +142,15 @@ static int usb_port_runtime_suspend(struct device *dev)
usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_ENABLE);
clear_bit(port1, hub->busy_bits);
usb_autopm_put_interface(intf);
+
+ /*
+ * Our peer usb3 port may now be able to suspend, asynchronously
+ * queue a suspend request to observe that this usb2 peer port
+ * is now off.
+ */
+ if (!hub_is_superspeed(hdev) && peer)
+ pm_runtime_put(&peer->dev);
+
return retval;
}
#endif
@@ -219,8 +238,26 @@ static struct usb_port *find_default_peer(struct usb_hub *hub, int port1)
return peer;
}
+/*
+ * Modifying ->peer affects usb_port_runtime_{suspend|resume} so make
+ * sure devices are active before the change and re-evaluate
+ * afterwards
+ */
+static void pre_modify_peers(struct usb_port *left, struct usb_port *right)
+{
+ pm_runtime_get_sync(&left->dev);
+ pm_runtime_get_sync(&right->dev);
+}
+
+static void post_modify_peers(struct usb_port *left, struct usb_port *right)
+{
+ pm_runtime_put(&left->dev);
+ pm_runtime_put(&right->dev);
+}
+
static int link_peers(struct usb_port *left, struct usb_port *right)
{
+ struct usb_device *ldev, *rdev;
int rc;
if (left->peer == right && right->peer == left)
@@ -246,9 +283,26 @@ static int link_peers(struct usb_port *left, struct usb_port *right)
return rc;
}
+ pre_modify_peers(left, right);
left->peer = right;
right->peer = left;
+ /*
+ * Ports are peer linked, hold a reference on the superspeed
+ * port which the hispeed port drops when it suspends. This
+ * ensures that superspeed ports only suspend after their
+ * hispeed peer.
+ */
+ ldev = to_usb_device(left->dev.parent->parent);
+ rdev = to_usb_device(right->dev.parent->parent);
+ if (hub_is_superspeed(ldev))
+ pm_runtime_get_noresume(&left->dev);
+ else {
+ WARN_ON(!hub_is_superspeed(rdev));
+ pm_runtime_get_noresume(&right->dev);
+ }
+ post_modify_peers(left, right);
+
return 0;
}
@@ -268,14 +322,32 @@ static void link_peers_report(struct usb_port *left, struct usb_port *right)
static void unlink_peers(struct usb_port *left, struct usb_port *right)
{
+ struct usb_device *ldev, *rdev;
+
WARN(right->peer != left || left->peer != right,
"%s and %s are not peers?\n",
dev_name(&left->dev), dev_name(&right->dev));
+ pre_modify_peers(left, right);
sysfs_remove_link(&left->dev.kobj, "peer");
right->peer = NULL;
sysfs_remove_link(&right->dev.kobj, "peer");
left->peer = NULL;
+
+ /*
+ * Ports are no longer peer linked, drop the reference that
+ * keeps the superspeed port (may be 'right' or 'left') powered
+ * when its peer is active
+ */
+ ldev = to_usb_device(left->dev.parent->parent);
+ rdev = to_usb_device(right->dev.parent->parent);
+ if (hub_is_superspeed(ldev))
+ pm_runtime_put_noidle(&left->dev);
+ else {
+ WARN_ON(!hub_is_superspeed(rdev));
+ pm_runtime_put_noidle(&right->dev);
+ }
+ post_modify_peers(left, right);
}
/**
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
