- delete the warning message at interrupt handler, and adds judgement at
ep_enable, if non-ep0 requests ctrl transfer, it will indicate an error.
- delete hw_test_and_clear_setup_status which is a broken code
- Tested with g_mass_storage, g_ncm, g_ether
Cc: matthieu.castet@xxxxxxxxxx
Reported-by: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
Acked-by: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
Tested-by: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
Signed-off-by: Peter Chen <peter.chen@xxxxxxxxxxxxx>
---
drivers/usb/chipidea/udc.c | 28 ++++++++--------------------
1 files changed, 8 insertions(+), 20 deletions(-)
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 09366b4..fe30dcc 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -178,19 +178,6 @@ static int hw_ep_get_halt(struct ci_hdrc *ci, int num, int dir)
}
/**
- * hw_test_and_clear_setup_status: test & clear setup status (execute without
- * interruption)
- * @n: endpoint number
- *
- * This function returns setup status
- */
-static int hw_test_and_clear_setup_status(struct ci_hdrc *ci, int n)
-{
- n = ep_to_bit(ci, n);
- return hw_test_and_clear(ci, OP_ENDPTSETUPSTAT, BIT(n));
-}
-
-/**
* hw_ep_prime: primes endpoint (execute without interruption)
* @num: endpoint number
* @dir: endpoint direction
@@ -997,14 +984,10 @@ __acquires(ci->lock)
}
}
- if (hwep->type != USB_ENDPOINT_XFER_CONTROL ||
- !hw_test_and_clear_setup_status(ci, i))
- continue;
-
- if (i != 0) {
- dev_warn(ci->dev, "ctrl traffic at endpoint %d\n", i);
+ /* Only handle setup packet below */
+ if (i != 0 ||
+ !hw_test_and_clear(ci, OP_ENDPTSETUPSTAT, BIT(0)))
continue;
- }
/*
* Flush data and handshake transactions of previous
@@ -1193,6 +1176,11 @@ static int ep_enable(struct usb_ep *ep,
hwep->qh.ptr->td.next |= cpu_to_le32(TD_TERMINATE); /* needed? */
+ if (hwep->num != 0 && hwep->type == USB_ENDPOINT_XFER_CONTROL) {
+ dev_err(hwep->ci->dev, "Set control xfer at non-ep0\n");
+ retval = -EINVAL;
+ }
+
/*
* Enable endpoints in the HW other than ep0 as ep0
* is always enabled
--
1.7.8
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
