W dniu 18.02.2014 14:15, Arturo Veras pisze:
hi all In my PC have the kernel linux usb gadget support enabled but when i
Why do you have usb gadget support in a PC in the first place? What are you trying to achieve? What you could achieve is for example to make your PC act as a mass storage device which can be connected to some PC host via USB.
try to load the module: sudo modprobe g_ether FATAL: Error inserting g_ether (/lib/modules/3.13.2/kernel/drivers/usb/gadget/g_ether.ko): No such device
Does your system have a USB device controller (UDC or OTG chip)? If not, the above is exactly what you should get.
maybe my usb is not supported by the driver. I don't know. i have a NM10/ICH7 Family USB UHCI Controller
UHCI is a host controller, not a device controller. You need a UDC/OTG chip in your system. If you don't have the required hardware, you can use the dummy_hcd driver, which combines a host and a device controllers emulated in software. But this is meant for playing with USB gadgets development; the dummy hcd is connected (in software) to the dummy udc so taking the example of mass storage you can make your PC act as a mass storage device connected to the very same PC acting both as a host and a device. AP -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
