- delete the warning message at interrupt handler, and adds judgement at ep_enable, if non-ep0 requests ctrl transfer, it will indicate an error. - delete hw_test_and_clear_setup_status which is a broken code - Tested with g_mass_storage, g_ncm, g_ether Cc: matthieu.castet@xxxxxxxxxx Reported-by: Michael Grzeschik <mgr@xxxxxxxxxxxxxx> Signed-off-by: Peter Chen <peter.chen@xxxxxxxxxxxxx> --- drivers/usb/chipidea/udc.c | 28 ++++++++-------------------- 1 files changed, 8 insertions(+), 20 deletions(-) diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 0a61c66..0dc56ae 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -178,19 +178,6 @@ static int hw_ep_get_halt(struct ci_hdrc *ci, int num, int dir) } /** - * hw_test_and_clear_setup_status: test & clear setup status (execute without - * interruption) - * @n: endpoint number - * - * This function returns setup status - */ -static int hw_test_and_clear_setup_status(struct ci_hdrc *ci, int n) -{ - n = ep_to_bit(ci, n); - return hw_test_and_clear(ci, OP_ENDPTSETUPSTAT, BIT(n)); -} - -/** * hw_ep_prime: primes endpoint (execute without interruption) * @num: endpoint number * @dir: endpoint direction @@ -997,14 +984,10 @@ __acquires(ci->lock) } } - if (hwep->type != USB_ENDPOINT_XFER_CONTROL || - !hw_test_and_clear_setup_status(ci, i)) - continue; - - if (i != 0) { - dev_warn(ci->dev, "ctrl traffic at endpoint %d\n", i); + /* Only handle setup packet below */ + if (i != 0 || + !hw_test_and_clear(ci, OP_ENDPTSETUPSTAT, BIT(0))) continue; - } /* * Flush data and handshake transactions of previous @@ -1193,6 +1176,11 @@ static int ep_enable(struct usb_ep *ep, hwep->qh.ptr->td.next |= cpu_to_le32(TD_TERMINATE); /* needed? */ + if (hwep->num != 0 && hwep->type == USB_ENDPOINT_XFER_CONTROL) { + dev_err(hwep->ci->dev, "Set control xfer at non-ep0\n"); + retval = -EINVAL; + } + /* * Enable endpoints in the HW other than ep0 as ep0 * is always enabled -- 1.7.8 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html