Hello.
On 24-01-2014 18:14, George Cherian wrote:
In case of ISOCH transfers the hrtimer workaround for the hardware issue
is not very reliable. Instead of checking musb_is_tx_fifo_empty() in hrtimer
routine, schedule a completion work and check the same in completion work.
Signed-off-by: George Cherian <george.cherian@xxxxxx>
---
drivers/usb/musb/musb_cppi41.c | 54 +++++++++++++++++++++++++++++++++++++++++-
1 file changed, 53 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c
index 39ee516..8075562 100644
--- a/drivers/usb/musb/musb_cppi41.c
+++ b/drivers/usb/musb/musb_cppi41.c
[...]
@@ -165,6 +178,32 @@ static void cppi41_trans_done(struct cppi41_dma_channel *cppi41_channel)
}
}
+static void cppi_trans_done_work(struct work_struct *work)
+{
+ unsigned long flags;
+ struct cppi41_dma_channel *cppi41_channel =
+ container_of(work, struct cppi41_dma_channel, dma_completion);
+ struct cppi41_dma_controller *controller = cppi41_channel->controller;
+ struct musb *musb = controller->musb;
+ struct musb_hw_ep *hw_ep = cppi41_channel->hw_ep;
+ bool empty;
+
+ if (!cppi41_channel->is_tx && is_isoc(hw_ep, 1)) {
+ spin_lock_irqsave(&musb->lock, flags);
+ cppi41_trans_done(cppi41_channel);
+ spin_unlock_irqrestore(&musb->lock, flags);
This *if* arm is clearly over-indented by one tab. Compare with below
*else* arm.
+ } else {
+ empty = musb_is_tx_fifo_empty(hw_ep);
+ if (empty) {
+ spin_lock_irqsave(&musb->lock, flags);
+ cppi41_trans_done(cppi41_channel);
+ spin_unlock_irqrestore(&musb->lock, flags);
+ } else {
+ schedule_work(&cppi41_channel->dma_completion);
+ }
+ }
+}
+
WBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
