Hi,
On 01/09/2014 10:08 PM, Sergei Shtylyov wrote:
On 01/09/2014 10:48 PM, Hans de Goede wrote:
Hi,
On 01/09/2014 09:14 PM, Sergei Shtylyov wrote:
Hello.
On 01/09/2014 08:57 PM, Hans de Goede wrote:
Add support for ohci-platform instantiation from devicetree, including
optionally getting clks and a phy from devicetree, and enabling / disabling
those on power_on / off.
This should allow using ohci-platform from devicetree in various cases.
Specifically after this commit it can be used for the ohci controller found
on Allwinner sunxi SoCs.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
.../devicetree/bindings/usb/mmio-ohci.txt | 22 +++
drivers/usb/host/ohci-platform.c | 150
++++++++++++++++++---
2 files changed, 152 insertions(+), 20 deletions(-)
create mode 100644 Documentation/devicetree/bindings/usb/mmio-ohci.txt
diff --git a/Documentation/devicetree/bindings/usb/mmio-ohci.txt
b/Documentation/devicetree/bindings/usb/mmio-ohci.txt
new file mode 100644
index 0000000..9c776ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/mmio-ohci.txt
@@ -0,0 +1,22 @@
+Generic MMIO OHCI controller
OHCI controller always uses MMIO, and likewise EHCI. You don't need to
specifically mention it.
Right, I'm only using it here because it is also used in the compatible string.
Please drop it.
+
+Required properties:
+- compatible : "mmio-ohci"
Likewise, it's not a good name. Why not call it "platform-ohci"?
Because, as you would have known had you read the entire thread, people objected
against exactly that name because the "platform" bus thing is a Linux invention,
and other operating systems don't use the platform nomenclature for non pci
busses.
I wonder where were all those people when "xhci-platform" compatible got adopted in drivers/usb/host/xhci-plat.c? :-P
Anyway, I want to suggest "usb-[eo]hci" of which "usb-ehci" binding has even already documented in Documentation/devicetree/bindings/usb/usb-ehci.txt.
Both these "compatible" values are used as backups in the multiple described bindings of the platform-specific [EO]HCI controllers. I really don't see why you should invent anything new (and so poorly named).
This too has already been discussed, again please read the entire thread including review of earlier versions of the patch.
We cannot usb usb-ehci, because the existing usb-ehci compatible string is not used for a generic usb controller, but
for a ppc specific one which needs model specific setup, see the driver currently implementing compatible = usb-ehci.
Regards,
Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
