Re: USB-modem not working correctly

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Le 09/01/14 14:27, Bjørn Mork a écrit :
Linus Gasser <list@xxxxxxxxxxxxxxxxxx> writes:

I'm trying to get an USB-modem running on a Smileplug, which is some
Arm7-device, using it with the kernel 3.12-6. As far as I can tell
it's an USB3-port. It works well with harddisks, but when I plug in
USB-modems, it always fails sooner or later.

Do you have this problem with different modems?
You could try a powered hub to eliminate any power related problems.
But if the port can power a harddisk spinning up, then I guess it should
handle the 3G modem power spikes too.  Anyway, a hub is a cheap and
simple test.

I tried again - one modem seems to work fine, while the other quits with a lot of

Jan 09 18:02:58 Profeda-new kernel: option1 ttyUSB0: option_instat_callback: error -71

But it doesn't disconnect! They also run in an ethernet-mode (using cdc_ether), I'll also try that one (but it lacks some functions I need, like sending USSD-codes).

So if you have some debugging advice, I'd like to do it...

Linus
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux