Greetings,Regarding the issue with WD MyBook 1230 stalling and being reset when connected to an HP EliteBook 8560p, I have tested the 3.13-rc7 kernel from kernel.org to no avail - the drive still stalls and is reset after a couple of seconds. I am attaching a dmesg output (relevant lines regarding the drive and the xHCI reset are at the end) and the usbmon trace. The lspci and lsusb outputs have been attached to the original mail I've opened this thread with (if necessary, I will gladly repost them).
The usbmon trace covers the complete session with the drive, starting with its connection to my USB 3.0 slot, then accessing the drive with "gdisk -l /dev/sdb", across its stall and reset, up to its physical disconnection.
The actual transcript of the communication with the drive that ensued after the "gdisk -l /dev/sdb" command that led to the stall starts at the decimal offset 82582 in the usbmon trace file.
Thank you! Best regards, Peter
Attachment:
files.tar.bz2
Description: application/bzip
