Signed-off-by: Rahul Bedarkar <rahulbedarkar89@xxxxxxxxx> --- drivers/usb/musb/blackfin.c | 4 ++-- drivers/usb/musb/musb_core.c | 6 +++--- drivers/usb/musb/musb_cppi41.c | 2 +- drivers/usb/musb/musb_host.c | 2 +- 4 files changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c index d9692f7..ef023b9 100644 --- a/drivers/usb/musb/blackfin.c +++ b/drivers/usb/musb/blackfin.c @@ -77,7 +77,7 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src) bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), dma_reg); SSYNC(); - /* Wait for compelete */ + /* Wait for complete */ while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << epnum))) cpu_relax(); @@ -131,7 +131,7 @@ void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst) bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), dma_reg); SSYNC(); - /* Wait for compelete */ + /* Wait for complete */ while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << epnum))) cpu_relax(); diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 4d4499b..d33eb3b 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -83,7 +83,7 @@ * This gets many kinds of configuration information: * - Kconfig for everything user-configurable * - platform_device for addressing, irq, and platform_data - * - platform_data is mostly for board-specific informarion + * - platform_data is mostly for board-specific information * (plus recentrly, SOC or family details) * * Most of the conditional compilation will (someday) vanish. @@ -1187,7 +1187,7 @@ fifo_setup(struct musb *musb, struct musb_hw_ep *hw_ep, musb_writeb(mbase, MUSB_INDEX, hw_ep->epnum); /* EP0 reserved endpoint for control, bidirectional; - * EP1 reserved for bulk, two unidirection halves. + * EP1 reserved for bulk, two unidirectional halves. */ if (hw_ep->epnum == 1) musb->bulk_ep = hw_ep; @@ -1857,7 +1857,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) /* The musb_platform_init() call: * - adjusts musb->mregs * - sets the musb->isr - * - may initialize an integrated tranceiver + * - may initialize an integrated transceiver * - initializes musb->xceiv, usually by otg_get_phy() * - stops powering VBUS * diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c index a12bd30..f889296 100644 --- a/drivers/usb/musb/musb_cppi41.c +++ b/drivers/usb/musb/musb_cppi41.c @@ -615,7 +615,7 @@ static int cppi41_dma_controller_start(struct cppi41_dma_controller *controller) dc = dma_request_slave_channel(dev, str); if (!dc) { - dev_err(dev, "Falied to request %s.\n", str); + dev_err(dev, "Failed to request %s.\n", str); ret = -EPROBE_DEFER; goto err; } diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 6582a20..b6c95b2 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -2013,7 +2013,7 @@ static int musb_schedule( head = &musb->out_bulk; /* Enable bulk RX/TX NAK timeout scheme when bulk requests are - * multiplexed. This scheme doen't work in high speed to full + * multiplexed. This scheme does not work in high speed to full * speed scenario as NAK interrupts are not coming from a * full speed device connected to a high speed device. * NAK timeout interval is 8 (128 uframe or 16ms) for HS and -- 1.8.1.2 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html