Signed-off-by: Rahul Bedarkar <rahulbedarkar89@xxxxxxxxx>
---
drivers/usb/core/buffer.c | 2 +-
drivers/usb/core/devio.c | 2 +-
drivers/usb/core/hcd.c | 2 +-
drivers/usb/core/hub.c | 6 +++---
drivers/usb/core/hub.h | 2 +-
drivers/usb/core/message.c | 4 ++--
drivers/usb/core/sysfs.c | 2 +-
drivers/usb/core/urb.c | 4 ++--
drivers/usb/core/usb-acpi.c | 2 +-
9 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/drivers/usb/core/buffer.c b/drivers/usb/core/buffer.c
index 2355974..684ef70 100644
--- a/drivers/usb/core/buffer.c
+++ b/drivers/usb/core/buffer.c
@@ -2,7 +2,7 @@
* DMA memory management for framework level HCD code (hc_driver)
*
* This implementation plugs in through generic "usb_bus" level methods,
- * and should work with all USB controllers, regardles of bus type.
+ * and should work with all USB controllers, regardless of bus type.
*/
#include <linux/module.h>
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 967152a..90e18f6 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -118,7 +118,7 @@ module_param(usbfs_memory_mb, uint, 0644);
MODULE_PARM_DESC(usbfs_memory_mb,
"maximum MB allowed for usbfs buffers (0 = no limit)");
-/* Hard limit, necessary to avoid aithmetic overflow */
+/* Hard limit, necessary to avoid arithmetic overflow */
#define USBFS_XFER_MAX (UINT_MAX / 2 - 1000000)
static atomic_t usbfs_memory_usage; /* Total memory currently allocated */
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 6bffb8c..674d2df 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1297,7 +1297,7 @@ EXPORT_SYMBOL_GPL(usb_hcd_unlink_urb_from_ep);
* DMA framework is dma_declare_coherent_memory()
*
* - So we use that, even though the primary requirement
- * is that the memory be "local" (hence addressible
+ * is that the memory be "local" (hence addressable
* by that device), not "coherent".
*
*/
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index bd9dc35..586321c 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2526,7 +2526,7 @@ static unsigned hub_is_wusb(struct usb_hub *hub)
static int hub_port_reset(struct usb_hub *hub, int port1,
struct usb_device *udev, unsigned int delay, bool warm);
-/* Is a USB 3.0 port in the Inactive or Complinance Mode state?
+/* Is a USB 3.0 port in the Inactive or Compliance Mode state?
* Port worm reset is required to recover
*/
static bool hub_port_warm_reset_required(struct usb_hub *hub, u16 portstatus)
@@ -3334,7 +3334,7 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
udev = hub->ports[port1 - 1]->child;
if (udev && udev->can_submit) {
- dev_warn(&intf->dev, "port %d nyet suspended\n", port1);
+ dev_warn(&intf->dev, "port %d yet suspended\n", port1);
if (PMSG_IS_AUTO(msg))
return -EBUSY;
}
@@ -4900,7 +4900,7 @@ static void hub_events(void)
static int hub_thread(void *__unused)
{
- /* khubd needs to be freezable to avoid intefering with USB-PERSIST
+ /* khubd needs to be freezable to avoid interfering with USB-PERSIST
* port handover. Otherwise it might see that a full-speed device
* was gone before the EHCI controller had handed its port over to
* the companion full-speed controller.
diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
index 4e4790d..df629a3 100644
--- a/drivers/usb/core/hub.h
+++ b/drivers/usb/core/hub.h
@@ -78,7 +78,7 @@ struct usb_hub {
/**
* struct usb port - kernel's representation of a usb port
- * @child: usb device attatched to the port
+ * @child: usb device attached to the port
* @dev: generic device interface
* @port_owner: port's owner
* @connect_type: port's connect type
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index bb31597..854a419 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -218,7 +218,7 @@ EXPORT_SYMBOL_GPL(usb_interrupt_msg);
*
* Return:
* If successful, 0. Otherwise a negative error number. The number of actual
- * bytes transferred will be stored in the @actual_length paramater.
+ * bytes transferred will be stored in the @actual_length parameter.
*
*/
int usb_bulk_msg(struct usb_device *usb_dev, unsigned int pipe,
@@ -518,7 +518,7 @@ void usb_sg_wait(struct usb_sg_request *io)
io->urbs[i]->dev = io->dev;
retval = usb_submit_urb(io->urbs[i], GFP_ATOMIC);
- /* after we submit, let completions or cancelations fire;
+ /* after we submit, let completions or cancellations fire;
* we handshake using io->status.
*/
spin_unlock_irq(&io->lock);
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index 52a97ad..1236c60 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -837,7 +837,7 @@ void usb_remove_sysfs_dev_files(struct usb_device *udev)
device_remove_bin_file(dev, &dev_bin_attr_descriptors);
}
-/* Interface Accociation Descriptor fields */
+/* Interface Association Descriptor fields */
#define usb_intf_assoc_attr(field, format_string) \
static ssize_t \
iad_##field##_show(struct device *dev, struct device_attribute *attr, \
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index e622083..6089696 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -53,7 +53,7 @@ EXPORT_SYMBOL_GPL(usb_init_urb);
* valid options for this.
*
* Creates an urb for the USB driver to use, initializes a few internal
- * structures, incrementes the usage counter, and returns a pointer to it.
+ * structures, increments the usage counter, and returns a pointer to it.
*
* If the driver want to use this urb for interrupt, control, or bulk
* endpoints, pass '0' as the number of iso packets.
@@ -281,7 +281,7 @@ EXPORT_SYMBOL_GPL(usb_unanchor_urb);
*
* Device drivers must explicitly request that repetition, by ensuring that
* some URB is always on the endpoint's queue (except possibly for short
- * periods during completion callacks). When there is no longer an urb
+ * periods during completion callbacks). When there is no longer an urb
* queued, the endpoint's bandwidth reservation is canceled. This means
* drivers can use their completion handlers to ensure they keep bandwidth
* they need, by reinitializing and resubmitting the just-completed urb
diff --git a/drivers/usb/core/usb-acpi.c b/drivers/usb/core/usb-acpi.c
index 4e243c3..d7cb822 100644
--- a/drivers/usb/core/usb-acpi.c
+++ b/drivers/usb/core/usb-acpi.c
@@ -92,7 +92,7 @@ static int usb_acpi_check_port_connect_type(struct usb_device *hdev,
int ret = 0;
/*
- * Accoding to ACPI Spec 9.13. PLD indicates whether usb port is
+ * According to ACPI Spec 9.13. PLD indicates whether usb port is
* user visible and _UPC indicates whether it is connectable. If
* the port was visible and connectable, it could be freely connected
* and disconnected with USB devices. If no visible and connectable,
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
