Use speed_t for baud rates throughout.
Signed-off-by: Johan Hovold <jhovold@xxxxxxxxx>
---
drivers/usb/serial/pl2303.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 8dd1c4a0aefd..40f7b80b3601 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -301,14 +301,14 @@ static void pl2303_encode_baudrate(struct tty_struct *tty,
struct usb_serial_port *port,
u8 buf[4])
{
- const int baud_sup[] = { 75, 150, 300, 600, 1200, 1800, 2400, 3600,
+ const speed_t baud_sup[] = { 75, 150, 300, 600, 1200, 1800, 2400, 3600,
4800, 7200, 9600, 14400, 19200, 28800, 38400,
57600, 115200, 230400, 460800, 500000, 614400,
921600, 1228800, 2457600, 3000000, 6000000 };
struct usb_serial *serial = port->serial;
struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
- int baud;
+ speed_t baud;
int i;
/*
@@ -317,7 +317,7 @@ static void pl2303_encode_baudrate(struct tty_struct *tty,
* 9600 baud (at least my PL2303X always does)
*/
baud = tty_get_baud_rate(tty);
- dev_dbg(&port->dev, "baud requested = %d\n", baud);
+ dev_dbg(&port->dev, "baud requested = %u\n", baud);
if (!baud)
return;
@@ -336,7 +336,7 @@ static void pl2303_encode_baudrate(struct tty_struct *tty,
/* type_0, type_1 only support up to 1228800 baud */
if (spriv->type != HX)
- baud = min_t(int, baud, 1228800);
+ baud = min_t(speed_t, baud, 1228800);
if (baud <= 115200) {
put_unaligned_le32(baud, buf);
@@ -358,7 +358,7 @@ static void pl2303_encode_baudrate(struct tty_struct *tty,
/* Save resulting baud rate */
tty_encode_baud_rate(tty, baud, baud);
- dev_dbg(&port->dev, "baud set = %d\n", baud);
+ dev_dbg(&port->dev, "baud set = %u\n", baud);
}
static int pl2303_get_line_request(struct usb_serial_port *port,
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
