Remove redundant error messages on allocation failures, which have
already been logged.
Cc: Joe Perches <joe@xxxxxxxxxxx>
Signed-off-by: Johan Hovold <jhovold@xxxxxxxxx>
---
drivers/usb/serial/ch341.c | 4 +--
drivers/usb/serial/console.c | 2 --
drivers/usb/serial/cp210x.c | 8 ++---
drivers/usb/serial/ftdi_sio.c | 5 +---
drivers/usb/serial/garmin_gps.c | 15 ++++------
drivers/usb/serial/io_edgeport.c | 48 ++++++++----------------------
drivers/usb/serial/io_ti.c | 56 ++++++++++-------------------------
drivers/usb/serial/ir-usb.c | 9 ++----
drivers/usb/serial/keyspan.c | 8 ++---
drivers/usb/serial/kl5kusb105.c | 16 ++++------
drivers/usb/serial/mos7720.c | 26 +++++-----------
drivers/usb/serial/mos7840.c | 18 ++---------
drivers/usb/serial/opticon.c | 4 ---
drivers/usb/serial/oti6858.c | 13 +++-----
drivers/usb/serial/pl2303.c | 1 -
drivers/usb/serial/quatech2.c | 8 ++---
drivers/usb/serial/sierra.c | 10 +------
drivers/usb/serial/ti_usb_3410_5052.c | 18 ++++-------
drivers/usb/serial/usb_wwan.c | 6 +---
drivers/usb/serial/visor.c | 10 ++-----
drivers/usb/serial/whiteheat.c | 6 +---
21 files changed, 74 insertions(+), 217 deletions(-)
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index c2a4171ab9cb..8908760cca9f 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -384,10 +384,8 @@ static void ch341_break_ctl(struct tty_struct *tty, int break_state)
uint8_t *break_reg;
break_reg = kmalloc(2, GFP_KERNEL);
- if (!break_reg) {
- dev_err(&port->dev, "%s - kmalloc failed\n", __func__);
+ if (!break_reg)
return;
- }
r = ch341_control_in(port->serial->dev, CH341_REQ_READ_REG,
ch341_break_reg, 0, break_reg, 2);
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index c69bb50d4663..b5b8dcbb33a2 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -135,7 +135,6 @@ static int usb_console_setup(struct console *co, char *options)
tty = kzalloc(sizeof(*tty), GFP_KERNEL);
if (!tty) {
retval = -ENOMEM;
- dev_err(&port->dev, "no more memory\n");
goto reset_open_count;
}
kref_init(&tty->kref);
@@ -144,7 +143,6 @@ static int usb_console_setup(struct console *co, char *options)
tty->index = co->index;
if (tty_init_termios(tty)) {
retval = -ENOMEM;
- dev_err(&port->dev, "no more memory\n");
goto free_tty;
}
}
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 6987b535aa98..95fa1217afdd 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -305,10 +305,8 @@ static int cp210x_get_config(struct usb_serial_port *port, u8 request,
length = (((size - 1) | 3) + 1) / 4;
buf = kcalloc(length, sizeof(__le32), GFP_KERNEL);
- if (!buf) {
- dev_err(&port->dev, "%s - out of memory.\n", __func__);
+ if (!buf)
return -ENOMEM;
- }
/* Issue the request, attempting to read 'size' bytes */
result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
@@ -352,10 +350,8 @@ static int cp210x_set_config(struct usb_serial_port *port, u8 request,
length = (((size - 1) | 3) + 1) / 4;
buf = kmalloc(length * sizeof(__le32), GFP_KERNEL);
- if (!buf) {
- dev_err(&port->dev, "%s - out of memory.\n", __func__);
+ if (!buf)
return -ENOMEM;
- }
/* Array of integers into bytes */
for (i = 0; i < length; i++)
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index b3f712f8cf17..a4bebacc5cae 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1695,11 +1695,8 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
priv = kzalloc(sizeof(struct ftdi_private), GFP_KERNEL);
- if (!priv) {
- dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n", __func__,
- sizeof(struct ftdi_private));
+ if (!priv)
return -ENOMEM;
- }
mutex_init(&priv->cfg_lock);
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 04b5ed90ffb2..f4ee74da44e8 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -279,10 +279,9 @@ static int pkt_add(struct garmin_data *garmin_data_p,
if (data_length) {
pkt = kmalloc(sizeof(struct garmin_packet)+data_length,
GFP_ATOMIC);
- if (pkt == NULL) {
- dev_err(&garmin_data_p->port->dev, "out of memory\n");
+ if (!pkt)
return 0;
- }
+
pkt->size = data_length;
memcpy(pkt->data, data, data_length);
@@ -1006,14 +1005,11 @@ static int garmin_write_bulk(struct usb_serial_port *port,
spin_unlock_irqrestore(&garmin_data_p->lock, flags);
buffer = kmalloc(count, GFP_ATOMIC);
- if (!buffer) {
- dev_err(&port->dev, "out of memory\n");
+ if (!buffer)
return -ENOMEM;
- }
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb) {
- dev_err(&port->dev, "no more free urbs\n");
kfree(buffer);
return -ENOMEM;
}
@@ -1393,10 +1389,9 @@ static int garmin_port_probe(struct usb_serial_port *port)
struct garmin_data *garmin_data_p;
garmin_data_p = kzalloc(sizeof(struct garmin_data), GFP_KERNEL);
- if (garmin_data_p == NULL) {
- dev_err(&port->dev, "%s - Out of memory\n", __func__);
+ if (!garmin_data_p)
return -ENOMEM;
- }
+
init_timer(&garmin_data_p->timer);
spin_lock_init(&garmin_data_p->lock);
INIT_LIST_HEAD(&garmin_data_p->pktlist);
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 9c79fb22f341..0dd8cce9c9d3 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -898,7 +898,6 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
edge_port->txfifo.fifo = kmalloc(edge_port->maxTxCredits, GFP_KERNEL);
if (!edge_port->txfifo.fifo) {
- dev_dbg(dev, "%s - no memory\n", __func__);
edge_close(port);
return -ENOMEM;
}
@@ -908,7 +907,6 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
edge_port->write_in_progress = false;
if (!edge_port->write_urb) {
- dev_dbg(dev, "%s - no memory\n", __func__);
edge_close(port);
return -ENOMEM;
}
@@ -1245,9 +1243,7 @@ static void send_more_port_data(struct edgeport_serial *edge_serial,
to send out */
count = fifo->count;
buffer = kmalloc(count+2, GFP_ATOMIC);
- if (buffer == NULL) {
- dev_err_console(edge_port->port,
- "%s - no more kernel memory...\n", __func__);
+ if (!buffer) {
edge_port->write_in_progress = false;
goto exit_send;
}
@@ -2025,11 +2021,8 @@ static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr,
dev_dbg(&serial->dev->dev, "%s - %x, %x, %d\n", __func__, extAddr, addr, length);
transfer_buffer = kmalloc(64, GFP_KERNEL);
- if (!transfer_buffer) {
- dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n",
- __func__, 64);
+ if (!transfer_buffer)
return -ENOMEM;
- }
/* need to split these writes up into 64 byte chunks */
result = 0;
@@ -2073,11 +2066,8 @@ static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr,
unsigned char *transfer_buffer;
transfer_buffer = kmalloc(64, GFP_KERNEL);
- if (!transfer_buffer) {
- dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n",
- __func__, 64);
+ if (!transfer_buffer)
return -ENOMEM;
- }
/* need to split these writes up into 64 byte chunks */
result = 0;
@@ -2119,11 +2109,8 @@ static int rom_read(struct usb_serial *serial, __u16 extAddr,
unsigned char *transfer_buffer;
transfer_buffer = kmalloc(64, GFP_KERNEL);
- if (!transfer_buffer) {
- dev_err(&serial->dev->dev,
- "%s - kmalloc(%d) failed.\n", __func__, 64);
+ if (!transfer_buffer)
return -ENOMEM;
- }
/* need to split these reads up into 64 byte chunks */
result = 0;
@@ -2163,11 +2150,8 @@ static int send_iosp_ext_cmd(struct edgeport_port *edge_port,
int status = 0;
buffer = kmalloc(10, GFP_ATOMIC);
- if (!buffer) {
- dev_err(&edge_port->port->dev,
- "%s - kmalloc(%d) failed.\n", __func__, 10);
+ if (!buffer)
return -ENOMEM;
- }
currentCommand = buffer;
@@ -2274,10 +2258,9 @@ static int send_cmd_write_baud_rate(struct edgeport_port *edge_port,
/* Alloc memory for the string of commands. */
cmdBuffer = kmalloc(0x100, GFP_ATOMIC);
- if (!cmdBuffer) {
- dev_err(dev, "%s - kmalloc(%d) failed.\n", __func__, 0x100);
+ if (!cmdBuffer)
return -ENOMEM;
- }
+
currCmd = cmdBuffer;
/* Enable access to divisor latch */
@@ -2783,10 +2766,9 @@ static int edge_startup(struct usb_serial *serial)
/* create our private serial structure */
edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL);
- if (edge_serial == NULL) {
- dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__);
+ if (!edge_serial)
return -ENOMEM;
- }
+
spin_lock_init(&edge_serial->es_lock);
edge_serial->serial = serial;
usb_set_serial_data(serial, edge_serial);
@@ -2875,14 +2857,12 @@ static int edge_startup(struct usb_serial *serial)
/* not set up yet, so do it now */
edge_serial->interrupt_read_urb =
usb_alloc_urb(0, GFP_KERNEL);
- if (!edge_serial->interrupt_read_urb) {
- dev_err(ddev, "out of memory\n");
+ if (!edge_serial->interrupt_read_urb)
return -ENOMEM;
- }
+
edge_serial->interrupt_in_buffer =
kmalloc(buffer_size, GFP_KERNEL);
if (!edge_serial->interrupt_in_buffer) {
- dev_err(ddev, "out of memory\n");
usb_free_urb(edge_serial->interrupt_read_urb);
return -ENOMEM;
}
@@ -2912,14 +2892,12 @@ static int edge_startup(struct usb_serial *serial)
/* not set up yet, so do it now */
edge_serial->read_urb =
usb_alloc_urb(0, GFP_KERNEL);
- if (!edge_serial->read_urb) {
- dev_err(ddev, "out of memory\n");
+ if (!edge_serial->read_urb)
return -ENOMEM;
- }
+
edge_serial->bulk_in_buffer =
kmalloc(buffer_size, GFP_KERNEL);
if (!edge_serial->bulk_in_buffer) {
- dev_err(&dev->dev, "out of memory\n");
usb_free_urb(edge_serial->read_urb);
return -ENOMEM;
}
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 2b3b7bfeb332..a673f4b25b08 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -364,11 +364,9 @@ static int write_boot_mem(struct edgeport_serial *serial,
/* Must do a read before write */
if (!serial->TiReadI2C) {
temp = kmalloc(1, GFP_KERNEL);
- if (!temp) {
- dev_err(&serial->serial->dev->dev,
- "%s - out of memory\n", __func__);
+ if (!temp)
return -ENOMEM;
- }
+
status = read_boot_mem(serial, 0, 1, temp);
kfree(temp);
if (status)
@@ -471,10 +469,8 @@ static int tx_active(struct edgeport_port *port)
int bytes_left = 0;
oedb = kmalloc(sizeof(*oedb), GFP_KERNEL);
- if (!oedb) {
- dev_err(&port->port->dev, "%s - out of memory\n", __func__);
+ if (!oedb)
return -ENOMEM;
- }
lsr = kmalloc(1, GFP_KERNEL); /* Sigh, that's right, just one byte,
as not all platforms can do DMA
@@ -625,14 +621,11 @@ static int check_i2c_image(struct edgeport_serial *serial)
__u16 ttype;
rom_desc = kmalloc(sizeof(*rom_desc), GFP_KERNEL);
- if (!rom_desc) {
- dev_err(dev, "%s - out of memory\n", __func__);
+ if (!rom_desc)
return -ENOMEM;
- }
+
buffer = kmalloc(TI_MAX_I2C_SIZE, GFP_KERNEL);
if (!buffer) {
- dev_err(dev, "%s - out of memory when allocating buffer\n",
- __func__);
kfree(rom_desc);
return -ENOMEM;
}
@@ -706,10 +699,9 @@ static int get_manuf_info(struct edgeport_serial *serial, __u8 *buffer)
struct device *dev = &serial->serial->dev->dev;
rom_desc = kmalloc(sizeof(*rom_desc), GFP_KERNEL);
- if (!rom_desc) {
- dev_err(dev, "%s - out of memory\n", __func__);
+ if (!rom_desc)
return -ENOMEM;
- }
+
start_address = get_descriptor_addr(serial, I2C_DESC_TYPE_ION,
rom_desc);
@@ -769,10 +761,8 @@ static int build_i2c_fw_hdr(__u8 *header, struct device *dev)
sizeof(struct ti_i2c_firmware_rec));
buffer = kmalloc(buffer_size, GFP_KERNEL);
- if (!buffer) {
- dev_err(dev, "%s - out of memory\n", __func__);
+ if (!buffer)
return -ENOMEM;
- }
// Set entire image of 0xffs
memset(buffer, 0xff, buffer_size);
@@ -832,10 +822,8 @@ static int i2c_type_bootmode(struct edgeport_serial *serial)
u8 *data;
data = kmalloc(1, GFP_KERNEL);
- if (!data) {
- dev_err(dev, "%s - out of memory\n", __func__);
+ if (!data)
return -ENOMEM;
- }
/* Try to read type 2 */
status = ti_vread_sync(serial->serial->dev, UMPC_MEMORY_READ,
@@ -986,10 +974,9 @@ static int download_fw(struct edgeport_serial *serial)
* Read Manufacturing Descriptor from TI Based Edgeport
*/
ti_manuf_desc = kmalloc(sizeof(*ti_manuf_desc), GFP_KERNEL);
- if (!ti_manuf_desc) {
- dev_err(dev, "%s - out of memory.\n", __func__);
+ if (!ti_manuf_desc)
return -ENOMEM;
- }
+
status = get_manuf_info(serial, (__u8 *)ti_manuf_desc);
if (status) {
kfree(ti_manuf_desc);
@@ -1006,7 +993,6 @@ static int download_fw(struct edgeport_serial *serial)
rom_desc = kmalloc(sizeof(*rom_desc), GFP_KERNEL);
if (!rom_desc) {
- dev_err(dev, "%s - out of memory.\n", __func__);
kfree(ti_manuf_desc);
return -ENOMEM;
}
@@ -1023,7 +1009,6 @@ static int download_fw(struct edgeport_serial *serial)
firmware_version = kmalloc(sizeof(*firmware_version),
GFP_KERNEL);
if (!firmware_version) {
- dev_err(dev, "%s - out of memory.\n", __func__);
kfree(rom_desc);
kfree(ti_manuf_desc);
return -ENOMEM;
@@ -1068,8 +1053,6 @@ static int download_fw(struct edgeport_serial *serial)
record = kmalloc(1, GFP_KERNEL);
if (!record) {
- dev_err(dev, "%s - out of memory.\n",
- __func__);
kfree(firmware_version);
kfree(rom_desc);
kfree(ti_manuf_desc);
@@ -1153,7 +1136,6 @@ static int download_fw(struct edgeport_serial *serial)
header = kmalloc(HEADER_SIZE, GFP_KERNEL);
if (!header) {
- dev_err(dev, "%s - out of memory.\n", __func__);
kfree(rom_desc);
kfree(ti_manuf_desc);
return -ENOMEM;
@@ -1161,7 +1143,6 @@ static int download_fw(struct edgeport_serial *serial)
vheader = kmalloc(HEADER_SIZE, GFP_KERNEL);
if (!vheader) {
- dev_err(dev, "%s - out of memory.\n", __func__);
kfree(header);
kfree(rom_desc);
kfree(ti_manuf_desc);
@@ -1290,10 +1271,9 @@ static int download_fw(struct edgeport_serial *serial)
* Read Manufacturing Descriptor from TI Based Edgeport
*/
ti_manuf_desc = kmalloc(sizeof(*ti_manuf_desc), GFP_KERNEL);
- if (!ti_manuf_desc) {
- dev_err(dev, "%s - out of memory.\n", __func__);
+ if (!ti_manuf_desc)
return -ENOMEM;
- }
+
status = get_manuf_info(serial, (__u8 *)ti_manuf_desc);
if (status) {
kfree(ti_manuf_desc);
@@ -1328,10 +1308,8 @@ static int download_fw(struct edgeport_serial *serial)
buffer_size = (((1024 * 16) - 512) +
sizeof(struct ti_i2c_image_header));
buffer = kmalloc(buffer_size, GFP_KERNEL);
- if (!buffer) {
- dev_err(dev, "%s - out of memory\n", __func__);
+ if (!buffer)
return -ENOMEM;
- }
/* Initialize the buffer to 0xff (pad the buffer) */
memset(buffer, 0xff, buffer_size);
@@ -2122,7 +2100,6 @@ static void change_port_settings(struct tty_struct *tty,
config = kmalloc (sizeof (*config), GFP_KERNEL);
if (!config) {
tty->termios = *old_termios;
- dev_err(dev, "%s - out of memory\n", __func__);
return;
}
@@ -2393,10 +2370,9 @@ static int edge_startup(struct usb_serial *serial)
/* create our private serial structure */
edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL);
- if (edge_serial == NULL) {
- dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__);
+ if (!edge_serial)
return -ENOMEM;
- }
+
mutex_init(&edge_serial->es_lock);
edge_serial->serial = serial;
usb_set_serial_data(serial, edge_serial);
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index 716930ab1bb1..73956d48a0c5 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -377,15 +377,12 @@ static void ir_set_termios(struct tty_struct *tty,
* send the baud change out on an "empty" data packet
*/
urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!urb) {
- dev_err(&port->dev, "%s - no more urbs\n", __func__);
+ if (!urb)
return;
- }
+
transfer_buffer = kmalloc(1, GFP_KERNEL);
- if (!transfer_buffer) {
- dev_err(&port->dev, "%s - out of memory\n", __func__);
+ if (!transfer_buffer)
goto err_buf;
- }
*transfer_buffer = ir_xbof | ir_baud;
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index d6960aebe246..6125fce7d0f6 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -1226,10 +1226,8 @@ static struct urb *keyspan_setup_urb(struct usb_serial *serial, int endpoint,
dev_dbg(&serial->interface->dev, "%s - alloc for endpoint %d.\n", __func__, endpoint);
urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */
- if (urb == NULL) {
- dev_dbg(&serial->interface->dev, "%s - alloc for endpoint %d failed.\n", __func__, endpoint);
+ if (!urb)
return NULL;
- }
if (endpoint == 0) {
/* control EP filled in when used */
@@ -2312,10 +2310,8 @@ static int keyspan_startup(struct usb_serial *serial)
/* Setup private data for serial driver */
s_priv = kzalloc(sizeof(struct keyspan_serial_private), GFP_KERNEL);
- if (!s_priv) {
- dev_dbg(&serial->dev->dev, "%s - kmalloc for keyspan_serial_private failed.\n", __func__);
+ if (!s_priv)
return -ENOMEM;
- }
s_priv->instat_buf = kzalloc(INSTAT_BUFLEN, GFP_KERNEL);
if (!s_priv->instat_buf)
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index 1b4054fe52a5..4f441c2c0668 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -182,11 +182,9 @@ static int klsi_105_get_line_state(struct usb_serial_port *port,
dev_info(&port->serial->dev->dev, "sending SIO Poll request\n");
status_buf = kmalloc(KLSI_STATUSBUF_LEN, GFP_KERNEL);
- if (!status_buf) {
- dev_err(&port->dev, "%s - out of memory for status buffer.\n",
- __func__);
+ if (!status_buf)
return -ENOMEM;
- }
+
status_buf[0] = 0xff;
status_buf[1] = 0xff;
rc = usb_control_msg(port->serial->dev,
@@ -273,11 +271,9 @@ static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
* priv->line_state.
*/
cfg = kmalloc(sizeof(*cfg), GFP_KERNEL);
- if (!cfg) {
- dev_err(&port->dev, "%s - out of memory for config buffer.\n",
- __func__);
+ if (!cfg)
return -ENOMEM;
- }
+
cfg->pktlen = 5;
cfg->baudrate = kl5kusb105a_sio_b9600;
cfg->databits = kl5kusb105a_dtb_8;
@@ -417,10 +413,8 @@ static void klsi_105_set_termios(struct tty_struct *tty,
speed_t baud;
cfg = kmalloc(sizeof(*cfg), GFP_KERNEL);
- if (!cfg) {
- dev_err(dev, "%s - out of memory for config buffer.\n", __func__);
+ if (!cfg)
return;
- }
/* lock while we are modifying the settings */
spin_lock_irqsave(&priv->lock, flags);
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index b739a1732b76..ee68191e87c6 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -362,15 +362,13 @@ static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport,
/* create and initialize the control urb and containing urbtracker */
urbtrack = kmalloc(sizeof(struct urbtracker), GFP_ATOMIC);
- if (urbtrack == NULL) {
- dev_err(&usbdev->dev, "out of memory");
+ if (!urbtrack)
return -ENOMEM;
- }
+
kref_get(&mos_parport->ref_count);
urbtrack->mos_parport = mos_parport;
urbtrack->urb = usb_alloc_urb(0, GFP_ATOMIC);
- if (urbtrack->urb == NULL) {
- dev_err(&usbdev->dev, "out of urbs");
+ if (!urbtrack->urb) {
kfree(urbtrack);
return -ENOMEM;
}
@@ -702,10 +700,9 @@ static int mos7715_parport_init(struct usb_serial *serial)
/* allocate and initialize parallel port control struct */
mos_parport = kzalloc(sizeof(struct mos7715_parport), GFP_KERNEL);
- if (mos_parport == NULL) {
- dev_dbg(&serial->dev->dev, "%s: kzalloc failed\n", __func__);
+ if (!mos_parport)
return -ENOMEM;
- }
+
mos_parport->msg_pending = false;
kref_init(&mos_parport->ref_count);
spin_lock_init(&mos_parport->listlock);
@@ -1018,18 +1015,12 @@ static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port)
for (j = 0; j < NUM_URBS; ++j) {
urb = usb_alloc_urb(0, GFP_KERNEL);
mos7720_port->write_urb_pool[j] = urb;
-
- if (urb == NULL) {
- dev_err(&port->dev, "No more urbs???\n");
+ if (!urb)
continue;
- }
urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE,
GFP_KERNEL);
if (!urb->transfer_buffer) {
- dev_err(&port->dev,
- "%s-out of memory for urb buffers.\n",
- __func__);
usb_free_urb(mos7720_port->write_urb_pool[j]);
mos7720_port->write_urb_pool[j] = NULL;
continue;
@@ -1250,11 +1241,8 @@ static int mos7720_write(struct tty_struct *tty, struct usb_serial_port *port,
if (urb->transfer_buffer == NULL) {
urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE,
GFP_KERNEL);
- if (urb->transfer_buffer == NULL) {
- dev_err_console(port, "%s no more kernel memory...\n",
- __func__);
+ if (!urb->transfer_buffer)
goto exit;
- }
}
transfer_size = min(count, URB_TRANSFER_BUFFER_SIZE);
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index bc176ae61743..2496e71e406a 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -876,20 +876,14 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
for (j = 0; j < NUM_URBS; ++j) {
urb = usb_alloc_urb(0, GFP_KERNEL);
mos7840_port->write_urb_pool[j] = urb;
-
- if (urb == NULL) {
- dev_err(&port->dev, "No more urbs???\n");
+ if (!urb)
continue;
- }
urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE,
GFP_KERNEL);
if (!urb->transfer_buffer) {
usb_free_urb(urb);
mos7840_port->write_urb_pool[j] = NULL;
- dev_err(&port->dev,
- "%s-out of memory for urb buffers.\n",
- __func__);
continue;
}
}
@@ -1381,12 +1375,8 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
if (urb->transfer_buffer == NULL) {
urb->transfer_buffer =
kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
-
- if (urb->transfer_buffer == NULL) {
- dev_err_console(port, "%s no more kernel memory...\n",
- __func__);
+ if (!urb->transfer_buffer)
goto exit;
- }
}
transfer_size = min(count, URB_TRANSFER_BUFFER_SIZE);
@@ -2206,10 +2196,8 @@ static int mos7840_port_probe(struct usb_serial_port *port)
dev_dbg(&port->dev, "mos7840_startup: configuring port %d\n", pnum);
mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL);
- if (mos7840_port == NULL) {
- dev_err(&port->dev, "%s - Out of memory\n", __func__);
+ if (!mos7840_port)
return -ENOMEM;
- }
/* Initialize all port interrupt end point to port 0 int
* endpoint. Our device has only one interrupt end point
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 1b4f1d2479c1..90c77b20c883 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -200,15 +200,12 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port,
buffer = kmalloc(count, GFP_ATOMIC);
if (!buffer) {
- dev_err(&port->dev, "out of memory\n");
count = -ENOMEM;
-
goto error_no_buffer;
}
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb) {
- dev_err(&port->dev, "no more free urbs\n");
count = -ENOMEM;
goto error_no_urb;
}
@@ -221,7 +218,6 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port,
* to transmit data to de barcode device the control endpoint is used */
dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_NOIO);
if (!dr) {
- dev_err(&port->dev, "out of memory\n");
count = -ENOMEM;
goto error_no_dr;
}
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index a2080ac7b7e5..1dea599bb71b 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -200,8 +200,7 @@ static void setup_line(struct work_struct *work)
int result;
new_setup = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL);
- if (new_setup == NULL) {
- dev_err(&port->dev, "%s(): out of memory!\n", __func__);
+ if (!new_setup) {
/* we will try again */
schedule_delayed_work(&priv->delayed_setup_work,
msecs_to_jiffies(2));
@@ -287,11 +286,9 @@ static void send_data(struct work_struct *work)
if (count != 0) {
allow = kmalloc(1, GFP_KERNEL);
- if (!allow) {
- dev_err_console(port, "%s(): kmalloc failed\n",
- __func__);
+ if (!allow)
return;
- }
+
result = usb_control_msg(port->serial->dev,
usb_rcvctrlpipe(port->serial->dev, 0),
OTI6858_REQ_T_CHECK_TXBUFF,
@@ -517,10 +514,8 @@ static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port)
usb_clear_halt(serial->dev, port->read_urb->pipe);
buf = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL);
- if (buf == NULL) {
- dev_err(&port->dev, "%s(): out of memory!\n", __func__);
+ if (!buf)
return -ENOMEM;
- }
result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
OTI6858_REQ_T_GET_STATUS,
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 9a7dfa3738d9..3dd5398174c1 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -346,7 +346,6 @@ static void pl2303_set_termios(struct tty_struct *tty,
buf = kzalloc(7, GFP_KERNEL);
if (!buf) {
- dev_err(&port->dev, "%s - out of memory.\n", __func__);
/* Report back no change occurred */
if (old_termios)
tty->termios = *old_termios;
diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c
index a24d59ae4032..cb51dd757b56 100644
--- a/drivers/usb/serial/quatech2.c
+++ b/drivers/usb/serial/quatech2.c
@@ -676,10 +676,8 @@ static int qt2_setup_urbs(struct usb_serial *serial)
serial_priv = usb_get_serial_data(serial);
serial_priv->read_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!serial_priv->read_urb) {
- dev_err(&serial->dev->dev, "No free urbs available\n");
+ if (!serial_priv->read_urb)
return -ENOMEM;
- }
usb_fill_bulk_urb(serial_priv->read_urb, serial->dev,
usb_rcvbulkpipe(serial->dev,
@@ -715,10 +713,8 @@ static int qt2_attach(struct usb_serial *serial)
}
serial_priv = kzalloc(sizeof(*serial_priv), GFP_KERNEL);
- if (!serial_priv) {
- dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__);
+ if (!serial_priv)
return -ENOMEM;
- }
serial_priv->read_buffer = kmalloc(QT2_READ_BUFFER_SIZE, GFP_KERNEL);
if (!serial_priv->read_buffer) {
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index de958c5b52e3..a9eb6221a815 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -497,14 +497,12 @@ static int sierra_write(struct tty_struct *tty, struct usb_serial_port *port,
buffer = kmalloc(writesize, GFP_ATOMIC);
if (!buffer) {
- dev_err(&port->dev, "out of memory\n");
retval = -ENOMEM;
goto error_no_buffer;
}
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb) {
- dev_err(&port->dev, "no more free urbs\n");
retval = -ENOMEM;
goto error_no_urb;
}
@@ -736,11 +734,8 @@ static struct urb *sierra_setup_urb(struct usb_serial *serial, int endpoint,
return NULL;
urb = usb_alloc_urb(0, mem_flags);
- if (urb == NULL) {
- dev_dbg(&serial->dev->dev, "%s: alloc for endpoint %d failed\n",
- __func__, endpoint);
+ if (!urb)
return NULL;
- }
buf = kmalloc(len, mem_flags);
if (buf) {
@@ -752,9 +747,6 @@ static struct urb *sierra_setup_urb(struct usb_serial *serial, int endpoint,
dev_dbg(&serial->dev->dev, "%s %c u : %p d:%p\n", __func__,
dir == USB_DIR_IN ? 'i' : 'o', urb, buf);
} else {
- dev_dbg(&serial->dev->dev, "%s %c u:%p d:%p\n", __func__,
- dir == USB_DIR_IN ? 'i' : 'o', urb, buf);
-
sierra_release_urb(urb);
urb = NULL;
}
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 4a649edaa2c0..698dc14b7d0d 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -301,10 +301,9 @@ static int ti_startup(struct usb_serial *serial)
/* create device structure */
tdev = kzalloc(sizeof(struct ti_device), GFP_KERNEL);
- if (tdev == NULL) {
- dev_err(&dev->dev, "%s - out of memory\n", __func__);
+ if (!tdev)
return -ENOMEM;
- }
+
mutex_init(&tdev->td_open_close_lock);
tdev->td_serial = serial;
usb_set_serial_data(serial, tdev);
@@ -722,10 +721,8 @@ static void ti_set_termios(struct tty_struct *tty,
return;
config = kmalloc(sizeof(*config), GFP_KERNEL);
- if (!config) {
- dev_err(&port->dev, "%s - out of memory\n", __func__);
+ if (!config)
return;
- }
config->wFlags = 0;
@@ -1194,10 +1191,8 @@ static int ti_get_lsr(struct ti_port *tport, u8 *lsr)
size = sizeof(struct ti_port_status);
data = kmalloc(size, GFP_KERNEL);
- if (!data) {
- dev_err(&port->dev, "%s - out of memory\n", __func__);
+ if (!data)
return -ENOMEM;
- }
status = ti_command_in_sync(tdev, TI_GET_PORT_STATUS,
(__u8)(TI_UART1_PORT+port_number), 0, (__u8 *)data, size);
@@ -1397,10 +1392,8 @@ static int ti_write_byte(struct usb_serial_port *port,
size = sizeof(struct ti_write_data_bytes) + 2;
data = kmalloc(size, GFP_KERNEL);
- if (!data) {
- dev_err(&port->dev, "%s - out of memory\n", __func__);
+ if (!data)
return -ENOMEM;
- }
data->bAddrType = TI_RW_DATA_ADDR_XDATA;
data->bDataType = TI_RW_DATA_BYTE;
@@ -1516,7 +1509,6 @@ static int ti_download_firmware(struct ti_device *tdev)
status = ti_do_download(dev, pipe, buffer, fw_p->size);
kfree(buffer);
} else {
- dev_dbg(&dev->dev, "%s ENOMEM\n", __func__);
status = -ENOMEM;
}
release_firmware(fw_p);
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index 85365784040b..640fe0173236 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -447,12 +447,8 @@ static struct urb *usb_wwan_setup_urb(struct usb_serial_port *port,
struct urb *urb;
urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */
- if (urb == NULL) {
- dev_dbg(&serial->interface->dev,
- "%s: alloc for endpoint %d failed.\n", __func__,
- endpoint);
+ if (!urb)
return NULL;
- }
/* Fill URB using supplied data. */
usb_fill_bulk_urb(urb, serial->dev,
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index ae016439e2cd..d93878541ee7 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -324,11 +324,8 @@ static int palm_os_3_probe(struct usb_serial *serial,
int num_ports = 0;
transfer_buffer = kmalloc(sizeof(*connection_info), GFP_KERNEL);
- if (!transfer_buffer) {
- dev_err(dev, "%s - kmalloc(%Zd) failed.\n", __func__,
- sizeof(*connection_info));
+ if (!transfer_buffer)
return -ENOMEM;
- }
/* send a get connection info request */
retval = usb_control_msg(serial->dev,
@@ -419,11 +416,8 @@ static int palm_os_4_probe(struct usb_serial *serial,
int retval;
transfer_buffer = kmalloc(sizeof(*connection_info), GFP_KERNEL);
- if (!transfer_buffer) {
- dev_err(dev, "%s - kmalloc(%Zd) failed.\n", __func__,
- sizeof(*connection_info));
+ if (!transfer_buffer)
return -ENOMEM;
- }
retval = usb_control_msg(serial->dev,
usb_rcvctrlpipe(serial->dev, 0),
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index d23290e496ef..1d9d7008ad19 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -288,12 +288,8 @@ static int whiteheat_attach(struct usb_serial *serial)
command_info = kmalloc(sizeof(struct whiteheat_command_private),
GFP_KERNEL);
- if (command_info == NULL) {
- dev_err(&serial->dev->dev,
- "%s: Out of memory for port structures\n",
- serial->type->description);
+ if (!command_info)
goto no_command_private;
- }
mutex_init(&command_info->mutex);
command_info->port_running = 0;
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
