From: Andreas Färber <afaerber@xxxxxxx> Add an initial binding for the UART in RDA Micro RDA8810PL SoC. Signed-off-by: Andreas Färber <afaerber@xxxxxxx> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> Reviewed-by: Rob Herring <robh@xxxxxxxxxx> Acked-by: Arnd Bergmann <arnd@xxxxxxxx> --- .../bindings/serial/rda,8810pl-uart.txt | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt diff --git a/Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt b/Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt new file mode 100644 index 000000000000..a08df97a69e6 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt @@ -0,0 +1,17 @@ +RDA Micro UART + +Required properties: +- compatible : "rda,8810pl-uart" for RDA8810PL SoCs. +- reg : Offset and length of the register set for the device. +- interrupts : Should contain UART interrupt. +- clocks : Phandle to the input clock. + + +Example: + + uart2: serial@20a90000 { + compatible = "rda,8810pl-uart"; + reg = <0x20a90000 0x1000>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_clk>; + }; -- 2.17.1 _______________________________________________ linux-unisoc mailing list linux-unisoc@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/linux-unisoc