Re: [PATCH 08/25] vfs: combine the clone and dedupe into a single remap_file_range

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Oct 10, 2018 at 08:54:44AM +0300, Amir Goldstein wrote:
> On Wed, Oct 10, 2018 at 3:12 AM Darrick J. Wong <darrick.wong@xxxxxxxxxx> wrote:
> >
> > From: Darrick J. Wong <darrick.wong@xxxxxxxxxx>
> >
> > Combine the clone_file_range and dedupe_file_range operations into a
> > single remap_file_range file operation dispatch since they're
> > fundamentally the same operation.  The differences between the two can
> > be made in the prep functions.
> >
> > Signed-off-by: Darrick J. Wong <darrick.wong@xxxxxxxxxx>
> > ---
> 
> I like this. Nits below.
> 
> [...]
> 
> > diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
> > index d60b6caf09e8..e22b294fa25b 100644
> > --- a/fs/btrfs/ioctl.c
> > +++ b/fs/btrfs/ioctl.c
> > @@ -3627,26 +3627,6 @@ static int btrfs_extent_same(struct inode *src, u64 loff, u64 olen,
> >         return ret;
> >  }
> >
> > -int btrfs_dedupe_file_range(struct file *src_file, loff_t src_loff,
> > -                           struct file *dst_file, loff_t dst_loff,
> > -                           u64 olen)
> > -{
> > -       struct inode *src = file_inode(src_file);
> > -       struct inode *dst = file_inode(dst_file);
> > -       u64 bs = BTRFS_I(src)->root->fs_info->sb->s_blocksize;
> > -
> > -       if (WARN_ON_ONCE(bs < PAGE_SIZE)) {
> > -               /*
> > -                * Btrfs does not support blocksize < page_size. As a
> > -                * result, btrfs_cmp_data() won't correctly handle
> > -                * this situation without an update.
> > -                */
> > -               return -EINVAL;
> > -       }
> > -
> > -       return btrfs_extent_same(src, src_loff, olen, dst, dst_loff);
> > -}
> > -
> >  static int clone_finish_inode_update(struct btrfs_trans_handle *trans,
> >                                      struct inode *inode,
> >                                      u64 endoff,
> > @@ -4348,9 +4328,27 @@ static noinline int btrfs_clone_files(struct file *file, struct file *file_src,
> >         return ret;
> >  }
> >
> > -int btrfs_clone_file_range(struct file *src_file, loff_t off,
> > -               struct file *dst_file, loff_t destoff, u64 len)
> > +int btrfs_remap_file_range(struct file *src_file, loff_t off,
> > +               struct file *dst_file, loff_t destoff, u64 len,
> > +               unsigned int flags)
> >  {
> > +       if (flags & RFR_IDENTICAL_DATA) {
> > +               struct inode *src = file_inode(src_file);
> > +               struct inode *dst = file_inode(dst_file);
> > +               u64 bs = BTRFS_I(src)->root->fs_info->sb->s_blocksize;
> > +
> > +               if (WARN_ON_ONCE(bs < PAGE_SIZE)) {
> > +                       /*
> > +                        * Btrfs does not support blocksize < page_size. As a
> > +                        * result, btrfs_cmp_data() won't correctly handle
> > +                        * this situation without an update.
> > +                        */
> > +                       return -EINVAL;
> > +               }
> > +
> > +               return btrfs_extent_same(src, off, len, dst, destoff);
> > +       }
> > +
> 
> Seems weird that you would do that instead of:
> 
> +    if (flags & ~RFR_IDENTICAL_DATA)
> +        return -EINVAL;
> +    if (flags & RFR_IDENTICAL_DATA)
> +        return btrfs_dedupe_file_range(src, off, dst, destoff, len);

Hmm.  The flags validation thing is kind of a mess here.  There should be a:

#define RFR_VALID_FLAGS	(RFR_IDENTICAL_DATA | /* add other RFR flags */)

And all these functions should also gate on:

if (remap_flags & ~RFR_VALID_FLAGS) {
	WARN_ON(...);
	return -EINVAL;
}

Though FWIW the btrfs implementation actually will support all three
flags, so the particular structure of these checks here are correct if
you add in my self-criticism above.

> 
> >         return btrfs_clone_files(dst_file, src_file, off, len, destoff);
> >  }
> >
> > diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
> > index 7065426b3280..bf971fd7cab2 100644
> > --- a/fs/cifs/cifsfs.c
> > +++ b/fs/cifs/cifsfs.c
> > @@ -975,8 +975,9 @@ const struct inode_operations cifs_symlink_inode_ops = {
> >         .listxattr = cifs_listxattr,
> >  };
> >
> > -static int cifs_clone_file_range(struct file *src_file, loff_t off,
> > -               struct file *dst_file, loff_t destoff, u64 len)
> > +static int cifs_remap_file_range(struct file *src_file, loff_t off,
> > +               struct file *dst_file, loff_t destoff, u64 len,
> > +               unsigned int flags)
> >  {
> >         struct inode *src_inode = file_inode(src_file);
> >         struct inode *target_inode = file_inode(dst_file);
> > @@ -986,6 +987,9 @@ static int cifs_clone_file_range(struct file *src_file, loff_t off,
> >         unsigned int xid;
> >         int rc;
> >
> > +       if (flags & RFR_IDENTICAL_DATA)
> > +               return -EOPNOTSUPP;
> > +
> 
> I think everyone would be better off with:
> +       if (flags)
> +               return -EINVAL;
> 
> This way you won't need to change all filesystem implementations
> every time that you add a new RFR flag.
> Lucky for us, dedup already return -EINVAL if (!f_op->dedupe_file_range)
> (and not -EOPNOTSUPP).

Ugh, right, I forgot about that, um, quirk of the interface. :(

> [...]
> > diff --git a/fs/overlayfs/file.c b/fs/overlayfs/file.c
> > index 986313da0c88..693bd0620a81 100644
> > --- a/fs/overlayfs/file.c
> > +++ b/fs/overlayfs/file.c
> > @@ -489,26 +489,28 @@ static ssize_t ovl_copy_file_range(struct file *file_in, loff_t pos_in,
> >                             OVL_COPY);
> >  }
> >
> > -static int ovl_clone_file_range(struct file *file_in, loff_t pos_in,
> > -                               struct file *file_out, loff_t pos_out, u64 len)
> > +static int ovl_remap_file_range(struct file *file_in, loff_t pos_in,
> > +                               struct file *file_out, loff_t pos_out,
> > +                               u64 len, unsigned int flags)
> >  {
> > -       return ovl_copyfile(file_in, pos_in, file_out, pos_out, len, 0,
> > -                           OVL_CLONE);
> > -}
> > +       enum ovl_copyop op;
> > +
> > +       if (flags & RFR_IDENTICAL_DATA)
> > +               op = OVL_DEDUPE;
> > +       else
> > +               op = OVL_CLONE;
> >
> > -static int ovl_dedupe_file_range(struct file *file_in, loff_t pos_in,
> > -                                struct file *file_out, loff_t pos_out, u64 len)
> > -{
> >         /*
> >          * Don't copy up because of a dedupe request, this wouldn't make sense
> >          * most of the time (data would be duplicated instead of deduplicated).
> >          */
> > -       if (!ovl_inode_upper(file_inode(file_in)) ||
> > -           !ovl_inode_upper(file_inode(file_out)))
> > +       if (op == OVL_DEDUPE &&
> > +           (!ovl_inode_upper(file_inode(file_in)) ||
> > +            !ovl_inode_upper(file_inode(file_out))))
> >                 return -EPERM;
> >
> >         return ovl_copyfile(file_in, pos_in, file_out, pos_out, len, 0,
> > -                           OVL_DEDUPE);
> > +                           op);
> >  }
> >
> 
> Apart from the generic check invalid flags comment - ACK on ovl part.

Thanks for the review!  Is that an official Acked-by to add to the
commit message, or an informal ACK?

--D

> Thanks,
> Amir.



[Index of Archives]     [Linux Filesystems Devel]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux