On Thu, Mar 1, 2018 at 2:13 PM, zhangyi (F) <yi.zhang@xxxxxxxxxx> wrote:
> Hook filesystem check helper to _check_test_fs and _check_scratch_fs
> for checking consistency of underlying dirs of overlay filesystem.
> These helpers works only if fsck.overlay exists.
>
> This patch introduce OVERLAY_FSCK_OPTIONS use for check overlayfs like
> OVERLAY_MOUNT_OPTIONS, and also introduce a mount point check helper in
> common/rc to detect a dir is a mount point or not.
>
> [ _check_test_fs/_check_scratch_fs part picked from Amir's patch, thanks ]
>
> Signed-off-by: zhangyi (F) <yi.zhang@xxxxxxxxxx>
> ---
> README.overlay | 10 ++++--
> common/config | 4 +++
> common/overlay | 99 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> common/rc | 18 +++++++++--
> 4 files changed, 127 insertions(+), 4 deletions(-)
>
> diff --git a/README.overlay b/README.overlay
> index dfb8234..3cbefab 100644
> --- a/README.overlay
> +++ b/README.overlay
> @@ -22,6 +22,10 @@ the base fs should be pre-formatted before starting the -overlay run.
> An easy way to accomplish this is by running './check <some test>' once,
> before running './check -overlay'.
>
> +'./check -overlay' support check overlay test and scratch dirs,
> +OVERLAY_FSCK_OPTIONS should be set instead of FSCK_OPTIONS if fsck
> +options need to given directly.
> +
> Because of the lack of mkfs support, multi-section config files are only
> partly supported with './check -overlay'. Only multi-section files that
> do not change FSTYP and MKFS_OPTIONS can be safely used with -overlay.
> @@ -40,7 +44,9 @@ run overlay tests on the same base fs, but with different mount options:
> MOUNT_OPTIONS="-o pquota"
> TEST_FS_MOUNT_OPTS="-o noatime"
> OVERLAY_MOUNT_OPTIONS="-o redirect_dir=off"
> + OVERLAY_FSCK_OPTIONS="-n redirect_dir=off"
typo for the phony options. I believe it is going to be: "-n -o
redirect_dir=off"
>
> In the example above, MOUNT_OPTIONS will be used to mount the base scratch fs,
> -TEST_FS_MOUNT_OPTS will be used to mount the base test fs and
> -OVERLAY_MOUNT_OPTIONS will be used to mount both test and scratch overlays.
> +TEST_FS_MOUNT_OPTS will be used to mount the base test fs,
> +OVERLAY_MOUNT_OPTIONS will be used to mount both test and scratch overlay and
> +OVERLAY_FSCK_OPTIONS will be used to check both test and scratch overlay.
> diff --git a/common/config b/common/config
> index 71115bd..20f0e5f 100644
> --- a/common/config
> +++ b/common/config
> @@ -566,6 +566,10 @@ _overlay_config_override()
> # Set SCRATCH vars to overlay base and mount dirs inside base fs
> export SCRATCH_DEV="$OVL_BASE_SCRATCH_MNT"
> export SCRATCH_MNT="$OVL_BASE_SCRATCH_MNT/$OVL_MNT"
> +
> + # Set fsck options, use default if user not set directly.
> + export FSCK_OPTIONS="$OVERLAY_FSCK_OPTIONS"
> + [ -z "$FSCK_OPTIONS" ] && _fsck_opts
> }
>
> _overlay_config_restore()
> diff --git a/common/overlay b/common/overlay
> index e1b07f4..5d01e5e 100644
> --- a/common/overlay
> +++ b/common/overlay
> @@ -190,3 +190,102 @@ _overlay_fsck_dirs()
> $FSCK_OVERLAY_PROG -o lowerdir=$lowerdir -o upperdir=$upperdir \
> -o workdir=$workdir $*
> }
> +
> +_overlay_check_dirs()
> +{
> + local lowerdir=$1
> + local upperdir=$2
> + local workdir=$3
> + shift 3
> + local err=0
> +
> + _overlay_fsck_dirs $lowerdir $upperdir $workdir \
> + $FSCK_OPTIONS $* >>$tmp.fsck 2>&1
> + if [ $? -ne 0 ]; then
> + _log_err "_overlay_check_fs: overlayfs on $lowerdir,$upperdir,$workdir is inconsistent"
> +
> + echo "*** fsck.overlay output ***" >>$seqres.full
> + cat $tmp.fsck >>$seqres.full
> + echo "*** end fsck.overlay output" >>$seqres.full
> +
> + echo "*** mount output ***" >>$seqres.full
> + _mount >>$seqres.full
> + echo "*** end mount output" >>$seqres.full
> +
> + err=1
> + fi
> + rm -f $tmp.fsck
> +
> + return $err
> +}
> +
> +_overlay_check_fs()
> +{
> + # The first arguments is overlay mount point use for checking
> + # overlay filesystem is mounted or not, the remaining arquments
> + # use for mounting overlay base filesystem if it was not mounted.
> + # We shift one to aligns arguments for _overlay_base_mount.
> + local ovl_mnt=$1
> + shift 1
> +
> + local base_dev=$3
> + local base_mnt=$4
> +
> + [ "$FSTYP" = overlay ] || return 0
> +
> + # Base fs needs to be mounted to check overlay dirs
> + local base_fstype=""
> + local ovl_mounted=""
> +
> + [ -z "$base_dev" ] || \
> + base_fstype=`_fs_type $base_dev`
> +
> + # If base_dev is set but base_fstype is empty, base fs is not
> + # mounted, we need to mount base fs. Otherwise, we need to
> + # check and umount overlayfs if it was mounted.
> + if [ -n "$base_dev" -a -z "$base_fstype" ]; then
> + _overlay_base_mount $*
> + else
> + # Check and umount overlay for dir check
> + ovl_mounted=`_is_dir_mountpoint $ovl_mnt`
> + [ -z "$ovl_mounted" ] || $UMOUNT_PROG $ovl_mnt
> + fi
> +
> + _overlay_check_dirs $base_mnt/$OVL_LOWER $base_mnt/$OVL_UPPER \
> + $base_mnt/$OVL_WORK
> + local ret=$?
> +
> + if [ -n "$base_dev" -a -z "$base_fstype" ]; then
> + _overlay_base_unmount "$base_dev" "$base_mnt"
> + elif [ $ret -eq 0 -a -n "$ovl_mounted" ]; then
> + # overlay was mounted, remount besides extra mount options
> + _overlay_mount $base_mnt $ovl_mnt
> + ret=$?
> + fi
> +
> + if [ $ret != 0 ]; then
> + status=1
> + if [ "$iam" != "check" ]; then
> + exit 1
> + fi
> + return 1
> + fi
> +
> + return 0
> +}
> +
> +_check_overlay_test_fs()
> +{
> + _overlay_check_fs "$TEST_DIR" \
> + OVL_BASE_TEST_DEV OVL_BASE_TEST_DIR \
> + "$OVL_BASE_TEST_DEV" "$OVL_BASE_TEST_DIR" \
> + $TEST_FS_MOUNT_OPTS $SELINUX_MOUNT_OPTIONS
> +}
> +
> +_check_overlay_scratch_fs()
> +{
> + _overlay_check_fs "$SCRATCH_MNT" \
> + OVL_BASE_SCRATCH_DEV OVL_BASE_SCRATCH_MNT \
> + "$OVL_BASE_SCRATCH_DEV" "$OVL_BASE_SCRATCH_MNT" \
> + $OVL_BASE_MOUNT_OPTIONS $SELINUX_MOUNT_OPTIONS
> +}
> diff --git a/common/rc b/common/rc
> index 1dae3bf..9317674 100644
> --- a/common/rc
> +++ b/common/rc
> @@ -2395,6 +2395,20 @@ _is_dev_mounted()
> findmnt -rncv -S $dev -t $fstype -o TARGET | head -1
> }
>
> +# check if the given dir is a mount point, if so, return mount point
> +_is_dir_mountpoint()
> +{
> + local dir=$1
> + local fstype=${2:-$FSTYP}
> +
> + if [ $# -lt 1 ]; then
> + echo "Uasge: _is_dir_mountpoint <dir> [fstype]" 1>&2
> + exit 1
> + fi
> +
> + findmnt -rncv -t $fstype -o TARGET $dir | head -1
> +}
> +
> # remount a FS to a new mode (ro or rw)
> #
> _remount()
> @@ -2590,7 +2604,7 @@ _check_test_fs()
> # no way to check consistency for GlusterFS
> ;;
> overlay)
> - # no way to check consistency for overlay
> + _check_overlay_test_fs
> ;;
> pvfs2)
> ;;
> @@ -2648,7 +2662,7 @@ _check_scratch_fs()
> # no way to check consistency for GlusterFS
> ;;
> overlay)
> - # no way to check consistency for overlay
> + _check_overlay_scratch_fs
> ;;
> pvfs2)
> ;;
> --
> 2.5.0
>
--
To unsubscribe from this list: send the line "unsubscribe linux-unionfs" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
