Tests that use _overlay_scratch_mount_dirs instead of _scratch_mount
should use _require_overlay_scratch_dirs instead of _require_scratch
because these tests are either mounting with multiple lower dirs or
mounting with non-default lower/upper/work dir, so
_check_overlay_scratch_fs won't handle these cases correctly, we need
to call _overlay_check_scratch_dirs with the correct arguments.
This patch modify these tests to optionally call
_overlay_check_scratch_dirs at the end of the test or after
_scratch_umount to mount base filesystem only and run the checker.
Signed-off-by: zhangyi (F) <yi.zhang@xxxxxxxxxx>
Reviewed-by: Amir Goldstein <amir73il@xxxxxxxxx>
---
tests/overlay/005 | 7 ++++++-
tests/overlay/010 | 7 ++++++-
tests/overlay/014 | 10 +++++++++-
tests/overlay/035 | 7 ++++++-
tests/overlay/036 | 6 +++++-
tests/overlay/037 | 7 ++++++-
tests/overlay/038 | 10 +++++++++-
tests/overlay/041 | 10 +++++++++-
tests/overlay/043 | 7 ++++++-
tests/overlay/044 | 8 +++++++-
tests/overlay/051 | 10 ++++++++--
tests/overlay/053 | 10 ++++++++--
tests/overlay/055 | 10 ++++++++--
13 files changed, 93 insertions(+), 16 deletions(-)
diff --git a/tests/overlay/005 b/tests/overlay/005
index 17992a3..87fc9bb 100755
--- a/tests/overlay/005
+++ b/tests/overlay/005
@@ -54,7 +54,9 @@ rm -f $seqres.full
# Modify as appropriate.
_supported_fs overlay
_supported_os Linux
-_require_scratch
+# Use non-default scratch underlying overlay dirs, we need to check
+# them explicity after test.
+_require_scratch_nocheck
_require_loop
# Remove all files from previous tests
@@ -102,6 +104,9 @@ $XFS_IO_PROG -f -c "o" ${SCRATCH_MNT}/test_file \
# unmount overlayfs
$UMOUNT_PROG $SCRATCH_MNT
+# check overlayfs
+_overlay_check_scratch_dirs $lowerd $upperd $workd
+
# unmount undelying xfs, this tiggers panic if memleak happens
$UMOUNT_PROG ${OVL_BASE_SCRATCH_MNT}/uppermnt
$UMOUNT_PROG ${OVL_BASE_SCRATCH_MNT}/lowermnt
diff --git a/tests/overlay/010 b/tests/overlay/010
index f55ebec..32af89c 100755
--- a/tests/overlay/010
+++ b/tests/overlay/010
@@ -48,7 +48,9 @@ rm -f $seqres.full
# real QA test starts here
_supported_fs overlay
_supported_os Linux
-_require_scratch
+# Use non-default scratch underlying overlay dirs, we need to check
+# them explicity after test.
+_require_scratch_nocheck
# Remove all files from previous tests
_scratch_mkfs
@@ -70,6 +72,9 @@ mknod $lowerdir2/testdir/a c 0 0
_overlay_scratch_mount_dirs "$lowerdir2:$lowerdir1" $upperdir $workdir
rm -rf $SCRATCH_MNT/testdir
+# check overlayfs
+_overlay_check_scratch_dirs "$lowerdir2:$lowerdir1" $upperdir $workdir
+
# success, all done
echo "Silence is golden"
status=0
diff --git a/tests/overlay/014 b/tests/overlay/014
index 9f308d3..67fad9f 100755
--- a/tests/overlay/014
+++ b/tests/overlay/014
@@ -53,7 +53,9 @@ rm -f $seqres.full
# real QA test starts here
_supported_fs overlay
_supported_os Linux
-_require_scratch
+# Use non-default scratch underlying overlay dirs, we need to check
+# them explicity after test.
+_require_scratch_nocheck
# Remove all files from previous tests
_scratch_mkfs
@@ -78,6 +80,9 @@ mkdir -p $SCRATCH_MNT/testdir/visibledir
# unmount overlayfs but not base fs
$UMOUNT_PROG $SCRATCH_MNT
+# check overlayfs
+_overlay_check_scratch_dirs $lowerdir1 $lowerdir2 $workdir2
+
# mount overlay again, with lowerdir1 and lowerdir2 as multiple lowerdirs,
# and create a new file in testdir, triggers copyup from lowerdir,
# copyup should not copy overlayfs private xattr
@@ -90,6 +95,9 @@ $UMOUNT_PROG $SCRATCH_MNT
_overlay_scratch_mount_dirs "$lowerdir2:$lowerdir1" $upperdir $workdir
ls $SCRATCH_MNT/testdir
+# check overlayfs
+_overlay_check_scratch_dirs "$lowerdir2:$lowerdir1" $upperdir $workdir
+
# success, all done
status=0
exit
diff --git a/tests/overlay/035 b/tests/overlay/035
index 0544774..d1b2c19 100755
--- a/tests/overlay/035
+++ b/tests/overlay/035
@@ -51,7 +51,9 @@ rm -f $seqres.full
# real QA test starts here
_supported_fs overlay
_supported_os Linux
-_require_scratch
+# Use non-default scratch underlying overlay dirs, we need to check
+# them explicity after test.
+_require_scratch_nocheck
_require_chattr i
# Remove all files from previous tests
@@ -81,6 +83,9 @@ _overlay_scratch_mount_dirs $lowerdir2 $upperdir $workdir
touch $SCRATCH_MNT/bar 2>&1 | _filter_scratch
_scratch_remount rw 2>&1 | _filter_ro_mount
+# check overlayfs
+_overlay_check_scratch_dirs $lowerdir2 $upperdir $workdir
+
# success, all done
status=0
exit
diff --git a/tests/overlay/036 b/tests/overlay/036
index e04aaee..8d3ccf4 100755
--- a/tests/overlay/036
+++ b/tests/overlay/036
@@ -69,7 +69,9 @@ rm -f $seqres.full
# real QA test starts here
_supported_fs overlay
_supported_os Linux
-_require_scratch
+# Use non-default scratch underlying overlay dirs, we need to check
+# them explicity after test.
+_require_scratch_nocheck
_require_scratch_feature index
# Remove all files from previous tests
@@ -110,6 +112,8 @@ _overlay_mount_dirs $lowerdir $upperdir $workdir2 \
_overlay_mount_dirs $lowerdir2 $upperdir2 $workdir \
overlay3 $SCRATCH_MNT -oindex=on 2>&1 | _filter_busy_mount
+# check overlayfs
+_overlay_check_scratch_dirs $lowerdir $upperdir $workdir
# success, all done
status=0
diff --git a/tests/overlay/037 b/tests/overlay/037
index 6710dda..4e2e5df 100755
--- a/tests/overlay/037
+++ b/tests/overlay/037
@@ -55,7 +55,9 @@ rm -f $seqres.full
# real QA test starts here
_supported_fs overlay
_supported_os Linux
-_require_scratch
+# Use non-default scratch underlying overlay dirs, we need to check
+# them explicity after test.
+_require_scratch_nocheck
_require_scratch_feature index
# Remove all files from previous tests
@@ -87,6 +89,9 @@ $UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
# Mount overlay with original lowerdir, upperdir, workdir and index=on - expect success
_overlay_scratch_mount_dirs $lowerdir $upperdir $workdir -oindex=on
+# check overlayfs
+_overlay_check_scratch_dirs $lowerdir $upperdir $workdir -oindex=on
+
# success, all done
status=0
exit
diff --git a/tests/overlay/038 b/tests/overlay/038
index bd87156..972a16e 100755
--- a/tests/overlay/038
+++ b/tests/overlay/038
@@ -46,7 +46,9 @@ _cleanup()
# real QA test starts here
_supported_fs overlay
_supported_os Linux
-_require_scratch
+# Use non-default scratch underlying overlay dirs, we need to check
+# them explicity after test.
+_require_scratch_nocheck
_require_attrs
_require_test_program "t_dir_type"
@@ -163,6 +165,9 @@ subdir_d=$($here/src/t_dir_type $pure_lower_dir $pure_lower_subdir_st_ino)
_scratch_unmount
+# check overlayfs
+_check_scratch_fs
+
# Verify pure lower residing in dir which has another lower layer
_scratch_mkfs
@@ -202,6 +207,9 @@ subdir_d=$($here/src/t_dir_type $pure_lower_dir $pure_lower_subdir_st_ino)
[[ $subdir_d == "subdir d" ]] || \
echo "Pure lower in dir which has another lower layer: Invalid d_ino reported for subdir"
+# check overlayfs
+_overlay_check_scratch_dirs "$middir:$lowerdir" $upperdir $workdir
+
echo "Silence is golden"
status=0
exit
diff --git a/tests/overlay/041 b/tests/overlay/041
index 11efacb..4e72348 100755
--- a/tests/overlay/041
+++ b/tests/overlay/041
@@ -48,7 +48,9 @@ _cleanup()
# real QA test starts here
_supported_fs overlay
_supported_os Linux
-_require_scratch
+# Use non-default scratch underlying overlay dirs, we need to check
+# them explicity after test.
+_require_scratch_nocheck
_require_test
_require_attrs
_require_test_program "t_dir_type"
@@ -168,6 +170,9 @@ subdir_d=$($here/src/t_dir_type $pure_lower_dir $pure_lower_subdir_st_ino)
_scratch_unmount
+# check overlayfs
+_overlay_check_scratch_dirs $lowerdir $upperdir $workdir
+
# Verify pure lower residing in dir which has another lower layer
middir=$OVL_BASE_TEST_DIR/$seq-ovl-mid
lowerdir=$OVL_BASE_TEST_DIR/$seq-ovl-lower
@@ -206,6 +211,9 @@ subdir_d=$($here/src/t_dir_type $pure_lower_dir $pure_lower_subdir_st_ino)
[[ $subdir_d == "subdir d" ]] || \
echo "Pure lower in dir which has another lower layer: Invalid d_ino reported for subdir"
+# check overlayfs
+_overlay_check_scratch_dirs "$middir:$lowerdir" $upperdir $workdir
+
echo "Silence is golden"
status=0
exit
diff --git a/tests/overlay/043 b/tests/overlay/043
index 699c4e1..46df686 100755
--- a/tests/overlay/043
+++ b/tests/overlay/043
@@ -56,7 +56,9 @@ _cleanup()
# real QA test starts here
_supported_fs overlay
_supported_os Linux
-_require_scratch
+# Use non-default scratch underlying overlay dirs, we need to check
+# them explicity after test.
+_require_scratch_nocheck
_require_test
_require_test_program "af_unix"
_require_test_program "t_dir_type"
@@ -153,6 +155,9 @@ _overlay_scratch_mount_dirs $lowerdir $upperdir $workdir
# Compare inode numbers before/after mount cycle
check_inode_numbers $testdir $tmp.after_move $tmp.after_cycle
+# check overlayfs
+_overlay_check_scratch_dirs $lowerdir $upperdir $workdir
+
echo "Silence is golden"
status=0
exit
diff --git a/tests/overlay/044 b/tests/overlay/044
index e57f6f7..2ab3035 100755
--- a/tests/overlay/044
+++ b/tests/overlay/044
@@ -49,7 +49,9 @@ _cleanup()
# real QA test starts here
_supported_fs overlay
_supported_os Linux
-_require_scratch
+# Use non-default scratch underlying overlay dirs, we need to check
+# them explicity after test.
+_require_scratch_nocheck
_require_test
_require_scratch_feature index
_require_test_program "t_dir_type"
@@ -122,6 +124,7 @@ check_ino_nlink $SCRATCH_MNT $tmp.before $tmp.after_one
# Verify that the hardlinks survive a mount cycle
$UMOUNT_PROG $SCRATCH_MNT
+_overlay_check_scratch_dirs $lowerdir $upperdir $workdir -o index=on
_overlay_scratch_mount_dirs $lowerdir $upperdir $workdir -o index=on
echo "== After mount cycle =="
@@ -138,5 +141,8 @@ echo "== After write two =="
cat $FILES
check_ino_nlink $SCRATCH_MNT $tmp.after_one $tmp.after_two
+# check overlayfs
+_overlay_check_scratch_dirs $lowerdir $upperdir $workdir -o index=on
+
status=0
exit
diff --git a/tests/overlay/051 b/tests/overlay/051
index ae7844d..04bd133 100755
--- a/tests/overlay/051
+++ b/tests/overlay/051
@@ -61,8 +61,10 @@ _cleanup()
_supported_fs overlay
_supported_os Linux
_require_test
-_require_scratch
_require_test_program "open_by_handle"
+# Use non-default scratch underlying overlay dirs, we need to check
+# them explicity after test.
+_require_scratch_nocheck
# We need to require both features together, because nfs_export cannot
# be enabled when index is disabled
_require_scratch_overlay_features index nfs_export
@@ -122,10 +124,14 @@ mount_dirs()
-o "index=on,nfs_export=on"
}
-# Unmount the overlay without unmounting base fs
+# Unmount the overlay without unmounting base fs and check the
+# underlying dirs
unmount_dirs()
{
$UMOUNT_PROG $SCRATCH_MNT
+
+ _overlay_check_scratch_dirs $middle:$lower $upper $work \
+ -o "index=on,nfs_export=on"
}
# Check non-stale file handles of lower/upper files and verify
diff --git a/tests/overlay/053 b/tests/overlay/053
index d4fdcde..d766cde 100755
--- a/tests/overlay/053
+++ b/tests/overlay/053
@@ -63,8 +63,10 @@ _cleanup()
_supported_fs overlay
_supported_os Linux
_require_test
-_require_scratch
_require_test_program "open_by_handle"
+# Use non-default scratch underlying overlay dirs, we need to check
+# them explicity after test.
+_require_scratch_nocheck
# We need to require all features together, because nfs_export cannot
# be enabled when index is disabled
_require_scratch_overlay_features index nfs_export redirect_dir
@@ -118,10 +120,14 @@ mount_dirs()
-o "index=on,nfs_export=on,redirect_dir=on"
}
-# Unmount the overlay without unmounting base fs
+# Unmount the overlay without unmounting base fs and check the
+# underlying dirs
unmount_dirs()
{
$UMOUNT_PROG $SCRATCH_MNT
+
+ _overlay_check_scratch_dirs $middle:$lower $upper $work \
+ -o "index=on,nfs_export=on,redirect_dir=on"
}
# Check non-stale file handles of lower/upper moved files
diff --git a/tests/overlay/055 b/tests/overlay/055
index 70fe6ac..02da6ef 100755
--- a/tests/overlay/055
+++ b/tests/overlay/055
@@ -67,8 +67,10 @@ _cleanup()
_supported_fs overlay
_supported_os Linux
_require_test
-_require_scratch
_require_test_program "open_by_handle"
+# Use non-default scratch underlying overlay dirs, we need to check
+# them explicity after test.
+_require_scratch_nocheck
# We need to require all features together, because nfs_export cannot
# be enabled when index is disabled
_require_scratch_overlay_features index nfs_export redirect_dir
@@ -122,10 +124,14 @@ mount_dirs()
-o "index=on,nfs_export=on,redirect_dir=on"
}
-# Unmount the overlay without unmounting base fs
+# Unmount the overlay without unmounting base fs and check the
+# underlying dirs
unmount_dirs()
{
$UMOUNT_PROG $SCRATCH_MNT
+
+ _overlay_check_scratch_dirs $middle:$lower $upper $work \
+ -o "index=on,nfs_export=on,redirect_dir=on"
}
# Check file handles of dir with ancestor under lower redirect
--
2.5.0
--
To unsubscribe from this list: send the line "unsubscribe linux-unionfs" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
