On Tue, Feb 13, 2018 at 9:08 AM, zhangyi (F) <yi.zhang@xxxxxxxxxx> wrote:
> Tests that use _overlay_scratch_mount_dirs instead of _scratch_mount
> should use _require_overlay_scratch_dirs instead of _require_scratch
> because these tests are either mounting with multiple lower dirs or
> mounting with non-default lower/upper/work dir, so
> _check_overlay_scratch_fs won't handle these cases correctly, we need
> to call _overlay_check_scratch_dirs with the correct arguments.
>
> This patch modify these tests to optionally call
> _overlay_check_scratch_dirs at the end of the test or before
> _scratch_umount to umount $SCRATCH_MNT and run the checker.
>
> Signed-off-by: zhangyi (F) <yi.zhang@xxxxxxxxxx>
> Reviewed-by: Amir Goldstein <amir73il@xxxxxxxxx>
Usually, you should remove Reviewed-by when patch has changed considerably.
Anyway, you may restore Reviewed-by after addressing minor comments below.
[...]
> --- a/tests/overlay/038
> +++ b/tests/overlay/038
> @@ -46,7 +46,9 @@ _cleanup()
> # real QA test starts here
> _supported_fs overlay
> _supported_os Linux
> -_require_scratch
> +# Use non-default scratch underlying overlay dirs, we need to check
> +# them explicity after test.
> +_require_scratch_nocheck
> _require_attrs
> _require_test_program "t_dir_type"
>
> @@ -161,6 +163,9 @@ subdir_d=$($here/src/t_dir_type $pure_lower_dir $pure_lower_subdir_st_ino)
> [[ $subdir_d == "subdir d" ]] || \
> echo "Merged dir: Invalid d_ino reported for subdir"
>
> +# check overlayfs
> +_check_scratch_fs
> +
> _scratch_unmount
>
Every time this pattern repeats, it is better to _check after _unmount.
Otherwise _check would need to unmount and mount for no reason.
> # Verify pure lower residing in dir which has another lower layer
> @@ -202,6 +207,9 @@ subdir_d=$($here/src/t_dir_type $pure_lower_dir $pure_lower_subdir_st_ino)
> [[ $subdir_d == "subdir d" ]] || \
> echo "Pure lower in dir which has another lower layer: Invalid d_ino reported for subdir"
>
> +# check overlayfs
> +_overlay_check_scratch_dirs "$middir:$lowerdir" $upperdir $workdir
> +
> echo "Silence is golden"
> status=0
> exit
> diff --git a/tests/overlay/041 b/tests/overlay/041
> index 11efacb..da50e0b 100755
> --- a/tests/overlay/041
> +++ b/tests/overlay/041
> @@ -48,7 +48,9 @@ _cleanup()
> # real QA test starts here
> _supported_fs overlay
> _supported_os Linux
> -_require_scratch
> +# Use non-default scratch underlying overlay dirs, we need to check
> +# them explicity after test.
> +_require_scratch_nocheck
> _require_test
> _require_attrs
> _require_test_program "t_dir_type"
> @@ -166,6 +168,9 @@ subdir_d=$($here/src/t_dir_type $pure_lower_dir $pure_lower_subdir_st_ino)
> [[ $subdir_d == "subdir d" ]] || \
> echo "Merged dir: Invalid d_ino reported for subdir"
>
> +# check overlayfs
> +_overlay_check_scratch_dirs $lowerdir $upperdir $workdir
> +
Here as well.
> _scratch_unmount
>
> # Verify pure lower residing in dir which has another lower layer
> @@ -206,6 +211,9 @@ subdir_d=$($here/src/t_dir_type $pure_lower_dir $pure_lower_subdir_st_ino)
> [[ $subdir_d == "subdir d" ]] || \
> echo "Pure lower in dir which has another lower layer: Invalid d_ino reported for subdir"
>
> +# check overlayfs
> +_overlay_check_scratch_dirs "$middir:$lowerdir" $upperdir $workdir
> +
> echo "Silence is golden"
> status=0
> exit
> diff --git a/tests/overlay/043 b/tests/overlay/043
> index 699c4e1..46df686 100755
> --- a/tests/overlay/043
> +++ b/tests/overlay/043
> @@ -56,7 +56,9 @@ _cleanup()
> # real QA test starts here
> _supported_fs overlay
> _supported_os Linux
> -_require_scratch
> +# Use non-default scratch underlying overlay dirs, we need to check
> +# them explicity after test.
> +_require_scratch_nocheck
> _require_test
> _require_test_program "af_unix"
> _require_test_program "t_dir_type"
> @@ -153,6 +155,9 @@ _overlay_scratch_mount_dirs $lowerdir $upperdir $workdir
> # Compare inode numbers before/after mount cycle
> check_inode_numbers $testdir $tmp.after_move $tmp.after_cycle
>
> +# check overlayfs
> +_overlay_check_scratch_dirs $lowerdir $upperdir $workdir
> +
> echo "Silence is golden"
> status=0
> exit
> diff --git a/tests/overlay/044 b/tests/overlay/044
> index e57f6f7..2ab3035 100755
> --- a/tests/overlay/044
> +++ b/tests/overlay/044
> @@ -49,7 +49,9 @@ _cleanup()
> # real QA test starts here
> _supported_fs overlay
> _supported_os Linux
> -_require_scratch
> +# Use non-default scratch underlying overlay dirs, we need to check
> +# them explicity after test.
> +_require_scratch_nocheck
> _require_test
> _require_scratch_feature index
> _require_test_program "t_dir_type"
> @@ -122,6 +124,7 @@ check_ino_nlink $SCRATCH_MNT $tmp.before $tmp.after_one
>
> # Verify that the hardlinks survive a mount cycle
> $UMOUNT_PROG $SCRATCH_MNT
> +_overlay_check_scratch_dirs $lowerdir $upperdir $workdir -o index=on
> _overlay_scratch_mount_dirs $lowerdir $upperdir $workdir -o index=on
>
> echo "== After mount cycle =="
> @@ -138,5 +141,8 @@ echo "== After write two =="
> cat $FILES
> check_ino_nlink $SCRATCH_MNT $tmp.after_one $tmp.after_two
>
> +# check overlayfs
> +_overlay_check_scratch_dirs $lowerdir $upperdir $workdir -o index=on
> +
> status=0
> exit
> diff --git a/tests/overlay/051 b/tests/overlay/051
> index ae7844d..b888f1e 100755
> --- a/tests/overlay/051
> +++ b/tests/overlay/051
> @@ -61,8 +61,10 @@ _cleanup()
> _supported_fs overlay
> _supported_os Linux
> _require_test
> -_require_scratch
> _require_test_program "open_by_handle"
> +# Use non-default scratch underlying overlay dirs, we need to check
> +# them explicity after test.
> +_require_scratch_nocheck
> # We need to require both features together, because nfs_export cannot
> # be enabled when index is disabled
> _require_scratch_overlay_features index nfs_export
> @@ -128,6 +130,13 @@ unmount_dirs()
> $UMOUNT_PROG $SCRATCH_MNT
> }
>
> +# Check underlying dirs of overlayfs
> +check_dirs()
> +{
> + _overlay_check_scratch_dirs $middle:$lower $upper $work \
> + -o "index=on,nfs_export=on"
Please embed this check inside unmount_dirs() instead of adding
check_dirs calls - the reason - I tried to keep diff between
05${i} and 05${i+1} to the implementation of the helpers, so that if
one test is updated it is easier to update its ^samefs flavor.
Thanks,
Amir.
--
To unsubscribe from this list: send the line "unsubscribe linux-unionfs" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
