On Wed, Jan 31, 2018 at 12:27 PM, zhangyi (F) <yi.zhang@xxxxxxxxxx> wrote:
> Tests that use _overlay_scratch_mount_dirs instead of _scratch_mount
> should use _require_overlay_scratch_dirs instead of _require_scratch.
> Those tests can optionally call _overlay_check_scratch_dirs at the end
> of the test or before _scratch_umount to umount $SCRATCH_MNT and
> run the checker.
>
> Signed-off-by: zhangyi (F) <yi.zhang@xxxxxxxxxx>
> Reviewed-by: Amir Goldstein <amir73il@xxxxxxxxx>
> ---
> tests/overlay/005 | 6 +++++-
> tests/overlay/010 | 6 +++++-
> tests/overlay/014 | 10 +++++++++-
> tests/overlay/035 | 6 +++++-
> tests/overlay/036 | 5 ++++-
> tests/overlay/037 | 6 +++++-
> tests/overlay/038 | 10 +++++++++-
> tests/overlay/041 | 10 +++++++++-
> tests/overlay/043 | 6 +++++-
> tests/overlay/044 | 13 +++++++++++--
> 10 files changed, 67 insertions(+), 11 deletions(-)
>
> diff --git a/tests/overlay/005 b/tests/overlay/005
> index 17992a3..f502d3f 100755
> --- a/tests/overlay/005
> +++ b/tests/overlay/005
> @@ -54,7 +54,7 @@ rm -f $seqres.full
> # Modify as appropriate.
> _supported_fs overlay
> _supported_os Linux
> -_require_scratch
> +_require_overlay_scratch_dirs
> _require_loop
>
> # Remove all files from previous tests
> @@ -102,6 +102,10 @@ $XFS_IO_PROG -f -c "o" ${SCRATCH_MNT}/test_file \
> # unmount overlayfs
> $UMOUNT_PROG $SCRATCH_MNT
>
> +# We called _require_overlay_scratch_dirs instead of _require_scratch,
> +# do check optionally dirs after test
> +_overlay_check_scratch_dirs $lowerd $upperd $workd
> +
> # unmount undelying xfs, this tiggers panic if memleak happens
> $UMOUNT_PROG ${OVL_BASE_SCRATCH_MNT}/uppermnt
> $UMOUNT_PROG ${OVL_BASE_SCRATCH_MNT}/lowermnt
> diff --git a/tests/overlay/010 b/tests/overlay/010
> index f55ebec..f3b50d7 100755
> --- a/tests/overlay/010
> +++ b/tests/overlay/010
> @@ -48,7 +48,7 @@ rm -f $seqres.full
> # real QA test starts here
> _supported_fs overlay
> _supported_os Linux
> -_require_scratch
> +_require_overlay_scratch_dirs
>
> # Remove all files from previous tests
> _scratch_mkfs
> @@ -70,6 +70,10 @@ mknod $lowerdir2/testdir/a c 0 0
> _overlay_scratch_mount_dirs "$lowerdir2:$lowerdir1" $upperdir $workdir
> rm -rf $SCRATCH_MNT/testdir
>
> +# We called _require_overlay_scratch_dirs instead of _require_scratch,
> +# do check optionally dirs after test
> +_overlay_check_scratch_dirs "$lowerdir2:$lowerdir1" $upperdir $workdir
> +
> # success, all done
> echo "Silence is golden"
> status=0
> diff --git a/tests/overlay/014 b/tests/overlay/014
> index 9f308d3..069d8b6 100755
> --- a/tests/overlay/014
> +++ b/tests/overlay/014
> @@ -53,7 +53,7 @@ rm -f $seqres.full
> # real QA test starts here
> _supported_fs overlay
> _supported_os Linux
> -_require_scratch
> +_require_overlay_scratch_dirs
>
> # Remove all files from previous tests
> _scratch_mkfs
> @@ -78,6 +78,10 @@ mkdir -p $SCRATCH_MNT/testdir/visibledir
> # unmount overlayfs but not base fs
> $UMOUNT_PROG $SCRATCH_MNT
>
> +# We called _require_overlay_scratch_dirs instead of _require_scratch,
> +# do check optionally dirs after each test
> +_overlay_check_scratch_dirs $lowerdir1 $lowerdir2 $workdir2
> +
> # mount overlay again, with lowerdir1 and lowerdir2 as multiple lowerdirs,
> # and create a new file in testdir, triggers copyup from lowerdir,
> # copyup should not copy overlayfs private xattr
> @@ -90,6 +94,10 @@ $UMOUNT_PROG $SCRATCH_MNT
> _overlay_scratch_mount_dirs "$lowerdir2:$lowerdir1" $upperdir $workdir
> ls $SCRATCH_MNT/testdir
>
> +# We called _require_overlay_scratch_dirs instead of _require_scratch,
> +# do check optionally dirs after each test
> +_overlay_check_scratch_dirs "$lowerdir2:$lowerdir1" $upperdir $workdir
> +
> # success, all done
> status=0
> exit
> diff --git a/tests/overlay/035 b/tests/overlay/035
> index 0544774..bc73013 100755
> --- a/tests/overlay/035
> +++ b/tests/overlay/035
> @@ -51,7 +51,7 @@ rm -f $seqres.full
> # real QA test starts here
> _supported_fs overlay
> _supported_os Linux
> -_require_scratch
> +_require_overlay_scratch_dirs
> _require_chattr i
>
> # Remove all files from previous tests
> @@ -81,6 +81,10 @@ _overlay_scratch_mount_dirs $lowerdir2 $upperdir $workdir
> touch $SCRATCH_MNT/bar 2>&1 | _filter_scratch
> _scratch_remount rw 2>&1 | _filter_ro_mount
>
> +# We called _require_overlay_scratch_dirs instead of _require_scratch,
> +# do check optionally dirs after test
> +_overlay_check_scratch_dirs $lowerdir2 $upperdir $workdir
> +
> # success, all done
> status=0
> exit
> diff --git a/tests/overlay/036 b/tests/overlay/036
> index e0c13ae..ca5adbd 100755
> --- a/tests/overlay/036
> +++ b/tests/overlay/036
> @@ -69,7 +69,7 @@ rm -f $seqres.full
> # real QA test starts here
> _supported_fs overlay
> _supported_os Linux
> -_require_scratch
> +_require_overlay_scratch_dirs
> _require_scratch_feature index
>
> # Remove all files from previous tests
> @@ -110,6 +110,9 @@ _overlay_mount_dirs $lowerdir2 $upperdir $workdir2 \
> _overlay_mount_dirs $lowerdir2 $upperdir2 $workdir \
> overlay3 $SCRATCH_MNT -oindex=on 2>&1 | _filter_busy_mount
>
> +# We called _require_overlay_scratch_dirs instead of _require_scratch,
> +# but which will not lead to inconsistency after this mount test,
> +# so do not check optionally dirs after test
What? Why are we not calling check here?
We should call check with the first _overlay_mount_dirs parameters
($lowerdir $upperdir $workdir)
>
> # success, all done
> status=0
> diff --git a/tests/overlay/037 b/tests/overlay/037
> index 6710dda..60290a1 100755
> --- a/tests/overlay/037
> +++ b/tests/overlay/037
> @@ -55,7 +55,7 @@ rm -f $seqres.full
> # real QA test starts here
> _supported_fs overlay
> _supported_os Linux
> -_require_scratch
> +_require_overlay_scratch_dirs
> _require_scratch_feature index
>
> # Remove all files from previous tests
> @@ -87,6 +87,10 @@ $UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
> # Mount overlay with original lowerdir, upperdir, workdir and index=on - expect success
> _overlay_scratch_mount_dirs $lowerdir $upperdir $workdir -oindex=on
>
> +# We called _require_overlay_scratch_dirs instead of _require_scratch,
> +# but which will not lead to inconsistency after this mount test,
> +# so do not check optionally dirs after test
> +
Again, why not checking here?
We should call check with the first/last _overlay_mount_dirs parameters
($lowerdir $upperdir $workdir -oindex=on)
> # success, all done
> status=0
> exit
> diff --git a/tests/overlay/038 b/tests/overlay/038
> index bd87156..aa20cbc 100755
> --- a/tests/overlay/038
> +++ b/tests/overlay/038
> @@ -46,7 +46,7 @@ _cleanup()
> # real QA test starts here
> _supported_fs overlay
> _supported_os Linux
> -_require_scratch
> +_require_overlay_scratch_dirs
> _require_attrs
> _require_test_program "t_dir_type"
>
> @@ -161,6 +161,10 @@ subdir_d=$($here/src/t_dir_type $pure_lower_dir $pure_lower_subdir_st_ino)
> [[ $subdir_d == "subdir d" ]] || \
> echo "Merged dir: Invalid d_ino reported for subdir"
>
> +# We called _require_overlay_scratch_dirs instead of _require_scratch,
> +# do check after each test
> +_check_scratch_fs
> +
> _scratch_unmount
>
> # Verify pure lower residing in dir which has another lower layer
> @@ -202,6 +206,10 @@ subdir_d=$($here/src/t_dir_type $pure_lower_dir $pure_lower_subdir_st_ino)
> [[ $subdir_d == "subdir d" ]] || \
> echo "Pure lower in dir which has another lower layer: Invalid d_ino reported for subdir"
>
> +# We called _require_overlay_scratch_dirs instead of _require_scratch,
> +# do check optionally dirs after each test
> +_overlay_check_scratch_dirs "$middir:$lowerdir" $upperdir $workdir
> +
-o index=on here as well
Thanks,
Amir.
--
To unsubscribe from this list: send the line "unsubscribe linux-unionfs" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
