Replace _require_scratch() with _require_overlay_scratch_dirs() in
overlay test cases that use optionally lower/upper/work test dirs,
and check these dirs explicitly if necessary.
Signed-off-by: zhangyi (F) <yi.zhang@xxxxxxxxxx>
---
tests/overlay/005 | 6 +++++-
tests/overlay/010 | 6 +++++-
tests/overlay/014 | 10 +++++++++-
tests/overlay/035 | 6 +++++-
tests/overlay/036 | 5 ++++-
tests/overlay/037 | 6 +++++-
tests/overlay/038 | 10 +++++++++-
tests/overlay/041 | 10 +++++++++-
tests/overlay/043 | 6 +++++-
tests/overlay/044 | 6 +++++-
10 files changed, 61 insertions(+), 10 deletions(-)
diff --git a/tests/overlay/005 b/tests/overlay/005
index 17992a3..58481d8 100755
--- a/tests/overlay/005
+++ b/tests/overlay/005
@@ -54,7 +54,7 @@ rm -f $seqres.full
# Modify as appropriate.
_supported_fs overlay
_supported_os Linux
-_require_scratch
+_require_overlay_scratch_dirs
_require_loop
# Remove all files from previous tests
@@ -102,6 +102,10 @@ $XFS_IO_PROG -f -c "o" ${SCRATCH_MNT}/test_file \
# unmount overlayfs
$UMOUNT_PROG $SCRATCH_MNT
+# We called _require_overlay_scratch_dirs instead of _require_scratch,
+# do check optionally dirs after test
+_overlay_check_dirs $lowerd $upperd $workd
+
# unmount undelying xfs, this tiggers panic if memleak happens
$UMOUNT_PROG ${OVL_BASE_SCRATCH_MNT}/uppermnt
$UMOUNT_PROG ${OVL_BASE_SCRATCH_MNT}/lowermnt
diff --git a/tests/overlay/010 b/tests/overlay/010
index f55ebec..b4a4ee8 100755
--- a/tests/overlay/010
+++ b/tests/overlay/010
@@ -48,7 +48,7 @@ rm -f $seqres.full
# real QA test starts here
_supported_fs overlay
_supported_os Linux
-_require_scratch
+_require_overlay_scratch_dirs
# Remove all files from previous tests
_scratch_mkfs
@@ -70,6 +70,10 @@ mknod $lowerdir2/testdir/a c 0 0
_overlay_scratch_mount_dirs "$lowerdir2:$lowerdir1" $upperdir $workdir
rm -rf $SCRATCH_MNT/testdir
+# We called _require_overlay_scratch_dirs instead of _require_scratch,
+# do check optionally dirs after test
+_overlay_check_dirs "$lowerdir2:$lowerdir1" $upperdir $workdir
+
# success, all done
echo "Silence is golden"
status=0
diff --git a/tests/overlay/014 b/tests/overlay/014
index 9f308d3..cc97c96 100755
--- a/tests/overlay/014
+++ b/tests/overlay/014
@@ -53,7 +53,7 @@ rm -f $seqres.full
# real QA test starts here
_supported_fs overlay
_supported_os Linux
-_require_scratch
+_require_overlay_scratch_dirs
# Remove all files from previous tests
_scratch_mkfs
@@ -78,6 +78,10 @@ mkdir -p $SCRATCH_MNT/testdir/visibledir
# unmount overlayfs but not base fs
$UMOUNT_PROG $SCRATCH_MNT
+# We called _require_overlay_scratch_dirs instead of _require_scratch,
+# do check optionally dirs after each test
+_overlay_check_dirs $lowerdir1 $lowerdir2 $workdir2
+
# mount overlay again, with lowerdir1 and lowerdir2 as multiple lowerdirs,
# and create a new file in testdir, triggers copyup from lowerdir,
# copyup should not copy overlayfs private xattr
@@ -90,6 +94,10 @@ $UMOUNT_PROG $SCRATCH_MNT
_overlay_scratch_mount_dirs "$lowerdir2:$lowerdir1" $upperdir $workdir
ls $SCRATCH_MNT/testdir
+# We called _require_overlay_scratch_dirs instead of _require_scratch,
+# do check optionally dirs after each test
+_overlay_check_dirs "$lowerdir2:$lowerdir1" $upperdir $workdir
+
# success, all done
status=0
exit
diff --git a/tests/overlay/035 b/tests/overlay/035
index 0544774..96643ba 100755
--- a/tests/overlay/035
+++ b/tests/overlay/035
@@ -51,7 +51,7 @@ rm -f $seqres.full
# real QA test starts here
_supported_fs overlay
_supported_os Linux
-_require_scratch
+_require_overlay_scratch_dirs
_require_chattr i
# Remove all files from previous tests
@@ -81,6 +81,10 @@ _overlay_scratch_mount_dirs $lowerdir2 $upperdir $workdir
touch $SCRATCH_MNT/bar 2>&1 | _filter_scratch
_scratch_remount rw 2>&1 | _filter_ro_mount
+# We called _require_overlay_scratch_dirs instead of _require_scratch,
+# do check optionally dirs after test
+_overlay_check_dirs $lowerdir2 $upperdir $workdir
+
# success, all done
status=0
exit
diff --git a/tests/overlay/036 b/tests/overlay/036
index e0c13ae..ca5adbd 100755
--- a/tests/overlay/036
+++ b/tests/overlay/036
@@ -69,7 +69,7 @@ rm -f $seqres.full
# real QA test starts here
_supported_fs overlay
_supported_os Linux
-_require_scratch
+_require_overlay_scratch_dirs
_require_scratch_feature index
# Remove all files from previous tests
@@ -110,6 +110,9 @@ _overlay_mount_dirs $lowerdir2 $upperdir $workdir2 \
_overlay_mount_dirs $lowerdir2 $upperdir2 $workdir \
overlay3 $SCRATCH_MNT -oindex=on 2>&1 | _filter_busy_mount
+# We called _require_overlay_scratch_dirs instead of _require_scratch,
+# but which will not lead to inconsistency after this mount test,
+# so do not check optionally dirs after test
# success, all done
status=0
diff --git a/tests/overlay/037 b/tests/overlay/037
index 6710dda..60290a1 100755
--- a/tests/overlay/037
+++ b/tests/overlay/037
@@ -55,7 +55,7 @@ rm -f $seqres.full
# real QA test starts here
_supported_fs overlay
_supported_os Linux
-_require_scratch
+_require_overlay_scratch_dirs
_require_scratch_feature index
# Remove all files from previous tests
@@ -87,6 +87,10 @@ $UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
# Mount overlay with original lowerdir, upperdir, workdir and index=on - expect success
_overlay_scratch_mount_dirs $lowerdir $upperdir $workdir -oindex=on
+# We called _require_overlay_scratch_dirs instead of _require_scratch,
+# but which will not lead to inconsistency after this mount test,
+# so do not check optionally dirs after test
+
# success, all done
status=0
exit
diff --git a/tests/overlay/038 b/tests/overlay/038
index bd87156..6a0b0ba 100755
--- a/tests/overlay/038
+++ b/tests/overlay/038
@@ -46,7 +46,7 @@ _cleanup()
# real QA test starts here
_supported_fs overlay
_supported_os Linux
-_require_scratch
+_require_overlay_scratch_dirs
_require_attrs
_require_test_program "t_dir_type"
@@ -161,6 +161,10 @@ subdir_d=$($here/src/t_dir_type $pure_lower_dir $pure_lower_subdir_st_ino)
[[ $subdir_d == "subdir d" ]] || \
echo "Merged dir: Invalid d_ino reported for subdir"
+# We called _require_overlay_scratch_dirs instead of _require_scratch,
+# do check after each test
+_check_scratch_fs
+
_scratch_unmount
# Verify pure lower residing in dir which has another lower layer
@@ -202,6 +206,10 @@ subdir_d=$($here/src/t_dir_type $pure_lower_dir $pure_lower_subdir_st_ino)
[[ $subdir_d == "subdir d" ]] || \
echo "Pure lower in dir which has another lower layer: Invalid d_ino reported for subdir"
+# We called _require_overlay_scratch_dirs instead of _require_scratch,
+# do check optionally dirs after each test
+_overlay_check_dirs "$middir:$lowerdir" $upperdir $workdir
+
echo "Silence is golden"
status=0
exit
diff --git a/tests/overlay/041 b/tests/overlay/041
index 4152107..2775085 100755
--- a/tests/overlay/041
+++ b/tests/overlay/041
@@ -48,7 +48,7 @@ _cleanup()
# real QA test starts here
_supported_fs overlay
_supported_os Linux
-_require_scratch
+_require_overlay_scratch_dirs
_require_test
_require_attrs
_require_test_program "t_dir_type"
@@ -167,6 +167,10 @@ subdir_d=$($here/src/t_dir_type $pure_lower_dir $pure_lower_subdir_st_ino)
[[ $subdir_d == "subdir d" ]] || \
echo "Merged dir: Invalid d_ino reported for subdir"
+# We called _require_overlay_scratch_dirs instead of _require_scratch,
+# do check optionally dirs after each test
+_overlay_check_dirs $lowerdir $upperdir $workdir
+
_scratch_unmount
# Verify pure lower residing in dir which has another lower layer
@@ -208,6 +212,10 @@ subdir_d=$($here/src/t_dir_type $pure_lower_dir $pure_lower_subdir_st_ino)
[[ $subdir_d == "subdir d" ]] || \
echo "Pure lower in dir which has another lower layer: Invalid d_ino reported for subdir"
+# We called _require_overlay_scratch_dirs instead of _require_scratch,
+# do check optionally dirs after each test
+_overlay_check_dirs $middir:$lowerdir $upperdir $workdir
+
echo "Silence is golden"
status=0
exit
diff --git a/tests/overlay/043 b/tests/overlay/043
index 858b6a9..e184e14 100755
--- a/tests/overlay/043
+++ b/tests/overlay/043
@@ -56,7 +56,7 @@ _cleanup()
# real QA test starts here
_supported_fs overlay
_supported_os Linux
-_require_scratch
+_require_overlay_scratch_dirs
_require_test
_require_test_program "af_unix"
_require_test_program "t_dir_type"
@@ -155,6 +155,10 @@ _overlay_scratch_mount_dirs $lowerdir $upperdir $workdir \
# Compare inode numbers before/after mount cycle
check_inode_numbers $testdir $tmp.after_move $tmp.after_cycle
+# We called _require_overlay_scratch_dirs instead of _require_scratch,
+# do check optionally dirs after test
+_overlay_check_dirs $lowerdir $upperdir $workdir
+
echo "Silence is golden"
status=0
exit
diff --git a/tests/overlay/044 b/tests/overlay/044
index 9c0ff04..70fe824 100755
--- a/tests/overlay/044
+++ b/tests/overlay/044
@@ -49,7 +49,7 @@ _cleanup()
# real QA test starts here
_supported_fs overlay
_supported_os Linux
-_require_scratch
+_require_overlay_scratch_dirs
_require_test
_require_scratch_feature index
_require_test_program "t_dir_type"
@@ -141,5 +141,9 @@ echo "== After write two =="
cat $FILES
check_ino_nlink $SCRATCH_MNT $tmp.after_one $tmp.after_two
+# We called _require_overlay_scratch_dirs instead of _require_scratch,
+# do check optionally dirs after test
+_overlay_check_dirs $lowerdir $upperdir $workdir
+
status=0
exit
--
2.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-unionfs" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
