On Sun, Jan 07, 2018 at 08:07:24PM +0200, Amir Goldstein wrote:
> - Check encode/write/decode/read content of lower/upper file handles
> - Check encode/decode/write/read content of lower/upper file handles
> - Check decode/read of unlinked lower/upper files and directories
> - Check decode/read of lower file handles after copy up, link and unlink
> - Check decode/read of lower file handles after rename of parent and self
I'm wondering that if this should be split into multiple tests somehow,
e.g. tests on regular files, tests on dirs and tests on hardlinks? It
might be eaiser to review and debug when there're test failures. But I
have no strong preference on this.
>
> This test does not cover connectable file handles of non-directories,
> because name_to_handle_at() syscall does not support requesting
> connectable file handles.
>
> This test covers only encode/decode of file handles for overlayfs
> configuration of lower and upper on the same fs.
>
> Signed-off-by: Amir Goldstein <amir73il@xxxxxxxxx>
> ---
> tests/overlay/050 | 291 ++++++++++++++++++++++++++++++++++++++++++++++++++
> tests/overlay/050.out | 50 +++++++++
> tests/overlay/group | 1 +
> 3 files changed, 342 insertions(+)
> create mode 100755 tests/overlay/050
> create mode 100644 tests/overlay/050.out
I ran the test on your ovl-nfs-export-v2 branch and saw failures like:
--- tests/overlay/050.out 2018-01-16 14:51:11.350000000 +0800
+++ /root/xfstests/results//xfs_4k_crc/overlay/050.out.bad 2018-01-16 15:08:43.487000000 +0800
@@ -45,6 +45,9 @@
test_file_handles SCRATCH_MNT/lowertestdir/subdir -p -o lower_subdir_file_handles
test_file_handles SCRATCH_MNT -rp -i upper_file_handles
test_file_handles SCRATCH_MNT -rp -i lower_file_handles
+open_by_handle() returned 116 incorrectly on a linked dir!
test_file_handles SCRATCH_MNT -rp -i upper_subdir_file_handles
test_file_handles SCRATCH_MNT -rp -i lower_subdir_file_handles
+open_by_handle() returned 116 incorrectly on a linked dir!
test_file_handles SCRATCH_MNT/lowertestdir.new -rp -i lower_subdir_file_handles
+open_by_handle() returned 116 incorrectly on a linked dir!
Are these failures expected?
>
> diff --git a/tests/overlay/050 b/tests/overlay/050
> new file mode 100755
> index 0000000..4dcd66a
> --- /dev/null
> +++ b/tests/overlay/050
> @@ -0,0 +1,291 @@
> +#! /bin/bash
> +# FS QA Test No. 050
> +#
> +# Test encode/decode overlay file handles
> +#
> +# - Check encode/write/decode/read content of lower/upper file handles
> +# - Check encode/decode/write/read content of lower/upper file handles
> +# - Check decode/read of unlinked lower/upper files and directories
> +# - Check decode/read of lower file handles after copy up, link and unlink
> +# - Check decode/read of lower file handles after rename of parent and self
> +#
> +# This test does not cover connectable file handles of non-directories,
> +# because name_to_handle_at() syscall does not support requesting connectable
> +# file handles.
> +#
> +#-----------------------------------------------------------------------
> +# Copyright (C) 2017 CTERA Networks. All Rights Reserved.
^^^^ 2018? :)
> +# Author: Amir Goldstein <amir73il@xxxxxxxxx>
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> +#-----------------------------------------------------------------------
> +#
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1 # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> + cd /
> + rm -f $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +
> +# real QA test starts here
> +
> +_supported_fs overlay
> +_supported_os Linux
> +_require_scratch
> +# _require_exportfs already requires open_by_handle, but let's not count on it
> +_require_test_program "open_by_handle"
> +_require_exportfs
>From the commits in your development branch, I know that overlay
exportfs support depends on "verify" feature, I'm wondering if we should
check "verify" feature explicitly? So we know we need to enable "verify"
feature, otherwise we just got "[not run] overlay does not support NFS
export", which seems not so informative.
Perhaps we should mention it in commit log too.
> +
> +lowerdir=$OVL_BASE_SCRATCH_MNT/$OVL_LOWER/lowertestdir
> +upperdir=$OVL_BASE_SCRATCH_MNT/$OVL_UPPER/uppertestdir
> +lowertestdir=$SCRATCH_MNT/lowertestdir
> +uppertestdir=$SCRATCH_MNT/uppertestdir
Hmm, the "lowerdir"/"upperdir" always make me think them as the
lowerdir/upperdir used in overlay mount options.., and they actually
should be lowertestdir/uppertestdir, i.e.
losertestdir=$OVL_BASE_SCRATCH_MNT/$OVL_LOWER/lowertestdir
uppertestdir=$OVL_BASE_SCRATCH_MNT/$OVL_UPPER/uppertestdir
and rename the previous "$lowertestdir"/"$uppertestdir" to other names,
maybe
ovl_lowertestdir=$SCRATCH_MNT/lowertestdir
ovl_uppertestdir=$SCRATCH_MNT/uppertestdir
I'm not good at naming variables..
> +NUMFILES=1
> +
> +# Create test dir and empty test files
> +create_test_files()
> +{
> + local dir=$1
> + local opt=$2
> +
> + mkdir -p $dir
> + src/open_by_handle -cp $opt $dir $NUMFILES
$here/src/open_by_handle? Using "$here" for consistency.
> +}
> +
> +# Test encode/decode file handles on overlay mount
> +test_file_handles()
> +{
> + local dir=$1
> + shift
> +
> + echo test_file_handles $dir $* | _filter_scratch | _filter_ovl_dirs | \
> + sed -e "s,$tmp\.,,g"
> + $here/src/open_by_handle $* $dir $NUMFILES
> +}
> +
> +# Re-create lower/upper/work dirs
> +create_dirs()
> +{
> + _scratch_mkfs
> +}
> +
> +# Mount an overlay on $SCRATCH_MNT with all layers on scratch partition
> +mount_dirs()
> +{
> + _scratch_mount
> +}
> +
> +# Unmount & check the overlay layers
> +unmount_dirs()
> +{
> + _scratch_unmount
> + _check_scratch_fs
> +}
> +
> +# Check non-stale file handles of lower/upper files and verify
> +# that handle decoded before copy up is encoded to upper after
^^^^^^^ encoded? ^^^^^^^ decoded?
> +# copy up. Verify reading data from file open by file handle
> +# and verify access_at() with dirfd open by file handle.
> +create_dirs
> +create_test_files $upperdir
> +create_test_files $lowerdir
> +mount_dirs
> +# Check encode/decode of upper regular file handles
> +test_file_handles $uppertestdir
> +# Check encode/decode of upper dir file handle
> +test_file_handles $uppertestdir -p
> +# Check encode/write/decode/read/write of upper file handles
> +test_file_handles $uppertestdir -wrap
> +# Check encode/decode of lower regular file handles before copy up
> +test_file_handles $lowertestdir
> +# Check encode/decode of lower dir file handles before copy up
> +test_file_handles $lowertestdir -p
> +# Check encode/write/decode/read/write of lower file handles across copy up
> +test_file_handles $lowertestdir -wrap
> +unmount_dirs
> +
> +# Check copy up after encode/decode of lower/upper files
> +# (copy up of disconnected dentry to index dir)
> +create_dirs
> +create_test_files $upperdir
> +create_test_files $lowerdir
> +mount_dirs
> +# Check encode/decode/write/read of upper regular file handles
> +test_file_handles $uppertestdir -a
> +test_file_handles $uppertestdir -r
> +# Check encode/decode/write/read of lower regular file handles
> +test_file_handles $lowertestdir -a
> +test_file_handles $lowertestdir -r
> +unmount_dirs
> +
> +# Check non-stale handles to unlinked but open lower/upper files
> +create_dirs
> +create_test_files $upperdir
> +create_test_files $upperdir.rw
> +create_test_files $lowerdir
> +create_test_files $lowerdir.rw
> +mount_dirs
> +test_file_handles $uppertestdir -dk
> +# Check encode/write/unlink/decode/read of upper regular file handles
> +test_file_handles $uppertestdir.rw -rwdk
> +test_file_handles $lowertestdir -dk
> +# Check encode/write/unlink/decode/read of lower file handles across copy up
> +test_file_handles $lowertestdir.rw -rwdk
> +unmount_dirs
> +
> +# Check stale handles of unlinked lower/upper files (nlink = 1,0)
Seems there's no nlink=1 case in this subtest.
> +create_dirs
> +create_test_files $upperdir
> +create_test_files $lowerdir
> +mount_dirs
> +# Check decode of upper file handles after unlink/rmdir (nlink == 0)
> +test_file_handles $uppertestdir -dp
> +# Check decode of lower file handles after unlink/rmdir (nlink == 0)
> +test_file_handles $lowertestdir -dp
> +unmount_dirs
> +
> +# Check non-stale file handles of linked lower/upper files (nlink = 1,2,1)
> +create_dirs
> +create_test_files $upperdir
> +create_test_files $lowerdir
> +mount_dirs
> +# Check encode/decode of upper file handles (nlink == 1)
> +test_file_handles $uppertestdir
This nlink=1 case has been tested in the first subtest.
> +# Check decode/read of upper file handles after link (nlink == 2)
> +test_file_handles $uppertestdir -wlr
> +# Check decode/read of upper file handles after link + unlink (nlink == 1)
> +test_file_handles $uppertestdir -ur
> +# Check encode/decode of lower file handles before copy up (nlink == 1)
> +test_file_handles $lowertestdir
Same here.
> +# Check decode/read of lower file handles after copy up + link (nlink == 2)
> +test_file_handles $lowertestdir -wlr
> +# Check decode/read of lower file handles after copy up + link + unlink (nlink == 1)
> +test_file_handles $lowertestdir -ur
> +unmount_dirs
> +
> +# Check non-stale file handles of linked lower/upper hardlinks (nlink = 2,1)
> +create_dirs
> +create_test_files $upperdir
> +create_test_files $lowerdir
> +# Create lower/upper hardlinks
> +test_file_handles $lowerdir -l >/dev/null
> +test_file_handles $upperdir -l >/dev/null
Add comments on why discard the stdout above?
> +mount_dirs
> +# Check encode/decode of upper hardlink file handles (nlink == 2)
> +test_file_handles $uppertestdir
> +# Check decode/read of upper hardlink file handles after unlink (nlink == 1)
> +test_file_handles $uppertestdir -wur
> +# Check encode/decode of lower hardlink file handles before copy up (nlink == 2)
> +test_file_handles $lowertestdir
> +# Check decode/read of lower hardlink file handles after copy up + unlink (nlink == 1)
> +test_file_handles $lowertestdir -wur
At first I suspected that this would fail if index feature was disabled,
then I found that verify feature depends on index feature. I think this
should be mentioned in commit log and in test as comment too.
Thanks,
Eryu
> +unmount_dirs
> +
> +# Check stale file handles of unlinked lower/upper hardlinks (nlink = 2,0)
> +create_dirs
> +create_test_files $upperdir
> +create_test_files $lowerdir
> +# Create lower/upper hardlinks
> +test_file_handles $lowerdir -l >/dev/null
> +test_file_handles $upperdir -l >/dev/null
> +mount_dirs
> +# Check encode/decode of upper hardlink file handles (nlink == 2)
> +test_file_handles $uppertestdir
> +# Check decode of upper hardlink file handles after 2*unlink (nlink == 0)
> +test_file_handles $uppertestdir -d
> +# Check encode/decode of lower hardlink file handles before copy up (nlink == 2)
> +test_file_handles $lowertestdir
> +# Check decode of lower hardlink file handles after copy up + 2*unlink (nlink == 0)
> +test_file_handles $lowertestdir -d
> +unmount_dirs
> +
> +# Check non-stale file handles of lower/upper renamed files
> +create_dirs
> +create_test_files $upperdir
> +create_test_files $lowerdir
> +mount_dirs
> +# Check decode/read of upper file handles after rename in same upper parent
> +test_file_handles $uppertestdir -wmr
> +# Check decode/read of lower file handles after copy up + rename in same merge parent
> +test_file_handles $lowertestdir -wmr
> +unmount_dirs
> +
> +# Check non-stale file handles of lower/upper moved files
> +create_dirs
> +create_test_files $upperdir -w
> +create_test_files $lowerdir -w
> +mkdir -p $lowerdir.lo $lowerdir.up $upperdir.lo $upperdir.up
> +mount_dirs
> +# Check encode/decode/read of lower/upper file handles after move to new upper testdir
> +test_file_handles $uppertestdir -o $tmp.upper_file_handles
> +test_file_handles $lowertestdir -o $tmp.lower_file_handles
> +mv $uppertestdir/* $uppertestdir.up/
> +mv $lowertestdir/* $uppertestdir.lo/
> +# Check open and read from stored file handles
> +test_file_handles $SCRATCH_MNT -r -i $tmp.upper_file_handles
> +test_file_handles $SCRATCH_MNT -r -i $tmp.lower_file_handles
> +# Check encode/decode/read of lower/upper file handles after move to new merge testdir
> +test_file_handles $uppertestdir.up -o $tmp.upper_file_handles
> +test_file_handles $uppertestdir.lo -o $tmp.lower_file_handles
> +mv $uppertestdir.up/* $lowertestdir.up/
> +mv $uppertestdir.lo/* $lowertestdir.lo/
> +# Check open and read from stored file handles
> +test_file_handles $SCRATCH_MNT -r -i $tmp.upper_file_handles
> +test_file_handles $SCRATCH_MNT -r -i $tmp.lower_file_handles
> +unmount_dirs
> +
> +# Check non-stale file handles of lower/upper renamed dirs
> +create_dirs
> +create_test_files $upperdir -w
> +create_test_files $lowerdir -w
> +create_test_files $upperdir/subdir -w
> +create_test_files $lowerdir/subdir -w
> +mount_dirs
> +# Check encode/decode/read of lower/upper file handles after rename of testdir
> +test_file_handles $uppertestdir -p -o $tmp.upper_file_handles
> +test_file_handles $lowertestdir -p -o $tmp.lower_file_handles
> +# Check encode/decode/read of lower/upper file handles after rename of testdir's parent
> +test_file_handles $uppertestdir/subdir -p -o $tmp.upper_subdir_file_handles
> +test_file_handles $lowertestdir/subdir -p -o $tmp.lower_subdir_file_handles
> +# Rename pure upper dir
> +mv $uppertestdir $uppertestdir.new/
> +# Copy up lower dir, index and rename
> +mv $lowertestdir $lowertestdir.new/
> +# Check open, read and readdir from stored file handles
> +# (testdir argument is the mount point and NOT the dir
> +# we are trying to open by stored file handle)
> +test_file_handles $SCRATCH_MNT -rp -i $tmp.upper_file_handles
> +test_file_handles $SCRATCH_MNT -rp -i $tmp.lower_file_handles
> +test_file_handles $SCRATCH_MNT -rp -i $tmp.upper_subdir_file_handles
> +test_file_handles $SCRATCH_MNT -rp -i $tmp.lower_subdir_file_handles
> +# Retry decoding lower subdir file handle when indexed testdir is in dcache
> +# (providing renamed testdir argument pins the indexed testdir to dcache)
> +test_file_handles $lowertestdir.new -rp -i $tmp.lower_subdir_file_handles
> +unmount_dirs
> +
> +status=0
> +exit
> diff --git a/tests/overlay/050.out b/tests/overlay/050.out
> new file mode 100644
> index 0000000..d8bac04
> --- /dev/null
> +++ b/tests/overlay/050.out
> @@ -0,0 +1,50 @@
> +QA output created by 050
> +test_file_handles SCRATCH_MNT/uppertestdir
> +test_file_handles SCRATCH_MNT/uppertestdir -p
> +test_file_handles SCRATCH_MNT/uppertestdir -wrap
> +test_file_handles SCRATCH_MNT/lowertestdir
> +test_file_handles SCRATCH_MNT/lowertestdir -p
> +test_file_handles SCRATCH_MNT/lowertestdir -wrap
> +test_file_handles SCRATCH_MNT/uppertestdir -a
> +test_file_handles SCRATCH_MNT/uppertestdir -r
> +test_file_handles SCRATCH_MNT/lowertestdir -a
> +test_file_handles SCRATCH_MNT/lowertestdir -r
> +test_file_handles SCRATCH_MNT/uppertestdir -dk
> +test_file_handles SCRATCH_MNT/uppertestdir.rw -rwdk
> +test_file_handles SCRATCH_MNT/lowertestdir -dk
> +test_file_handles SCRATCH_MNT/lowertestdir.rw -rwdk
> +test_file_handles SCRATCH_MNT/uppertestdir -dp
> +test_file_handles SCRATCH_MNT/lowertestdir -dp
> +test_file_handles SCRATCH_MNT/uppertestdir
> +test_file_handles SCRATCH_MNT/uppertestdir -wlr
> +test_file_handles SCRATCH_MNT/uppertestdir -ur
> +test_file_handles SCRATCH_MNT/lowertestdir
> +test_file_handles SCRATCH_MNT/lowertestdir -wlr
> +test_file_handles SCRATCH_MNT/lowertestdir -ur
> +test_file_handles SCRATCH_MNT/uppertestdir
> +test_file_handles SCRATCH_MNT/uppertestdir -wur
> +test_file_handles SCRATCH_MNT/lowertestdir
> +test_file_handles SCRATCH_MNT/lowertestdir -wur
> +test_file_handles SCRATCH_MNT/uppertestdir
> +test_file_handles SCRATCH_MNT/uppertestdir -d
> +test_file_handles SCRATCH_MNT/lowertestdir
> +test_file_handles SCRATCH_MNT/lowertestdir -d
> +test_file_handles SCRATCH_MNT/uppertestdir -wmr
> +test_file_handles SCRATCH_MNT/lowertestdir -wmr
> +test_file_handles SCRATCH_MNT/uppertestdir -o upper_file_handles
> +test_file_handles SCRATCH_MNT/lowertestdir -o lower_file_handles
> +test_file_handles SCRATCH_MNT -r -i upper_file_handles
> +test_file_handles SCRATCH_MNT -r -i lower_file_handles
> +test_file_handles SCRATCH_MNT/uppertestdir.up -o upper_file_handles
> +test_file_handles SCRATCH_MNT/uppertestdir.lo -o lower_file_handles
> +test_file_handles SCRATCH_MNT -r -i upper_file_handles
> +test_file_handles SCRATCH_MNT -r -i lower_file_handles
> +test_file_handles SCRATCH_MNT/uppertestdir -p -o upper_file_handles
> +test_file_handles SCRATCH_MNT/lowertestdir -p -o lower_file_handles
> +test_file_handles SCRATCH_MNT/uppertestdir/subdir -p -o upper_subdir_file_handles
> +test_file_handles SCRATCH_MNT/lowertestdir/subdir -p -o lower_subdir_file_handles
> +test_file_handles SCRATCH_MNT -rp -i upper_file_handles
> +test_file_handles SCRATCH_MNT -rp -i lower_file_handles
> +test_file_handles SCRATCH_MNT -rp -i upper_subdir_file_handles
> +test_file_handles SCRATCH_MNT -rp -i lower_subdir_file_handles
> +test_file_handles SCRATCH_MNT/lowertestdir.new -rp -i lower_subdir_file_handles
> diff --git a/tests/overlay/group b/tests/overlay/group
> index 7e541e4..6cb3763 100644
> --- a/tests/overlay/group
> +++ b/tests/overlay/group
> @@ -49,3 +49,4 @@
> 044 auto quick copyup hardlink nonsamefs
> 047 auto quick copyup hardlink
> 048 auto quick copyup hardlink
> +050 auto quick copyup hardlink exportfs
> --
> 2.7.4
>
--
To unsubscribe from this list: send the line "unsubscribe linux-unionfs" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
