[PATCH v6] libtracefs: Add initial support for meson

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Introduce Meson as build framework for building libtracefs.

The build steps are:

  # configure using .build as build directory and install destination
  # /tmp/test
  meson setup --prefix=/tmp/libtraceevent .build

  # trigger the build
  meson compile -C .build

  # In case you want to build the documentation, trigger the
  # build via the 'docs' target:
  meson compile -C build docs

  # install the library (and documentation)
  meson install -C .build

Signed-off-by: Daniel Wagner <dwagner@xxxxxxx>
---
 v6:
 - changed project defaults to --default-library=both
 - code style consistency updates
 - hardening doc install script (shellcheck)
 - renamed install-man.sh.in to install-docs.sh.in
 - install-docs.sh.in installs html pages too
 - introduces docs target
 - updated copyright year
 - streamlined documentation meson build file

v5:
 - build unit test only if cunit is found
 - default build target is debug
 - do not install man pages into subdirs
 - install sqlhist (because we install the man page too, so why not the tool?)

v4:
 - add subdir include path to cflags in pkgconfg file
 - refactoring build instruction for section 1 and section 3 documentation
   into one loop (reduce code duplication)

v3:
 - build documetation
 - build samples
 - set default location to /usr/local

v2:
 - updated commit message
 - dropped the include path patch, the pkg-config
   from libtraceevent is including them

v1:
 - initial version

 Documentation/install-docs.sh.in |  20 ++++
 Documentation/meson.build        | 197 +++++++++++++++++++++++++++++++
 include/meson.build              |  11 ++
 meson.build                      |  47 ++++++++
 meson_options.txt                |  16 +++
 samples/extract-example.sh       |   3 +
 samples/meson.build              |  45 +++++++
 src/meson.build                  |  62 ++++++++++
 utest/meson.build                |  17 +++
 9 files changed, 418 insertions(+)
 create mode 100755 Documentation/install-docs.sh.in
 create mode 100644 Documentation/meson.build
 create mode 100644 include/meson.build
 create mode 100644 meson.build
 create mode 100644 meson_options.txt
 create mode 100644 samples/extract-example.sh
 create mode 100644 samples/meson.build
 create mode 100644 src/meson.build
 create mode 100644 utest/meson.build

diff --git a/Documentation/install-docs.sh.in b/Documentation/install-docs.sh.in
new file mode 100755
index 000000000000..26a55aec2a76
--- /dev/null
+++ b/Documentation/install-docs.sh.in
@@ -0,0 +1,20 @@
+#!/bin/bash
+# SPDX-License-Identifier: LGPL-2.1
+#
+# Copyright (c) 2023 Daniel Wagner, SUSE LLC
+
+for section in 1 3; do
+    while IFS= read -r -d '' man; do
+        [ ! -d "${DESTDIR}@MANDIR@/man${section}" ] && install -d "${DESTDIR}@MANDIR@/man${section}"
+
+        echo Installing "${man}" to "${DESTDIR}@MANDIR@/man${section}"
+        install -m 0644 "${man}" "${DESTDIR}@MANDIR@/man${section}/"
+    done< <(find "@SRCDIR@" -name "*\.${section}" -type f -print0)
+done
+
+while IFS= read -r -d '' html; do
+    [ ! -d "${DESTDIR}@HTMLDIR@"  ] && install -d "${DESTDIR}@HTMLDIR@"
+
+    echo Installing "${html}" to "${DESTDIR}@HTMLDIR@"
+    install -m 0644 "${html}" "${DESTDIR}@HTMLDIR@"
+done< <(find "@SRCDIR@" -name "*\.html" -type f -print0)
diff --git a/Documentation/meson.build b/Documentation/meson.build
new file mode 100644
index 000000000000..efb78b602965
--- /dev/null
+++ b/Documentation/meson.build
@@ -0,0 +1,197 @@
+# SPDX-License-Identifier: LGPL-2.1
+#
+# Copyright (c) 2023 Daniel Wagner, SUSE LLC
+
+# input text file: man page section
+
+sources = {
+    'libtracefs-sqlhist.txt.1': '1',
+    'libtracefs-cpu-open.txt': '3',
+    'libtracefs-cpu.txt': '3',
+    'libtracefs-dynevents.txt': '3',
+    'libtracefs-eprobes.txt': '3',
+    'libtracefs-error.txt': '3',
+    'libtracefs-events-file.txt': '3',
+    'libtracefs-events-tep.txt': '3',
+    'libtracefs-events.txt': '3',
+    'libtracefs-files.txt': '3',
+    'libtracefs-filter.txt': '3',
+    'libtracefs-function-filter.txt': '3',
+    'libtracefs-hist-cont.txt': '3',
+    'libtracefs-hist-mod.txt': '3',
+    'libtracefs-hist.txt': '3',
+    'libtracefs-instances-affinity.txt': '3',
+    'libtracefs-instances-file-manip.txt': '3',
+    'libtracefs-instances-files.txt': '3',
+    'libtracefs-instances-manage.txt': '3',
+    'libtracefs-instances-utils.txt': '3',
+    'libtracefs-iterator.txt': '3',
+    'libtracefs-kprobes.txt': '3',
+    'libtracefs-log.txt': '3',
+    'libtracefs-marker_raw.txt': '3',
+    'libtracefs-marker.txt': '3',
+    'libtracefs-option-get.txt': '3',
+    'libtracefs-option-misc.txt': '3',
+    'libtracefs-options.txt': '3',
+    'libtracefs-sql.txt': '3',
+    'libtracefs-stream.txt': '3',
+    'libtracefs-synth2.txt': '3',
+    'libtracefs-synth-info.txt': '3',
+    'libtracefs-synth.txt': '3',
+    'libtracefs-traceon.txt': '3',
+    'libtracefs-tracer.txt': '3',
+    'libtracefs.txt': '3',
+    'libtracefs-uprobes.txt': '3',
+    'libtracefs-utils.txt': '3',
+}
+
+conf_dir = meson.current_source_dir() + '/'
+top_source_dir = meson.current_source_dir() + '/../'
+
+##
+# For asciidoc ...
+#   -7.1.2,     no extra settings are needed.
+#    8.0-,      set ASCIIDOC8.
+#
+
+#
+# For docbook-xsl ...
+#   -1.68.1,         set ASCIIDOC_NO_ROFF? (based on changelog from 1.73.0)
+#    1.69.0,         no extra settings are needed?
+#    1.69.1-1.71.0,  set DOCBOOK_SUPPRESS_SP?
+#    1.71.1,         no extra settings are needed?
+#    1.72.0,         set DOCBOOK_XSL_172.
+#    1.73.0-,        set ASCIIDOC_NO_ROFF
+#
+
+#
+# If you had been using DOCBOOK_XSL_172 in an attempt to get rid
+# of 'the ".ft C" problem' in your generated manpages, and you
+# instead ended up with weird characters around callouts, try
+# using ASCIIDOC_NO_ROFF instead (it works fine with ASCIIDOC8).
+#
+
+if get_option('asciidoctor')
+    asciidoc = find_program('asciidoctor')
+    asciidoc_extra  = ['-a', 'compat-mode']
+    asciidoc_extra += ['-I.']
+    asciidoc_extra += ['-r', 'asciidoctor-extensions']
+    asciidoc_extra += ['-a', 'mansource=libtraceevent']
+    asciidoc_extra += ['-a', 'manmanual="libtraceevent Manual"']
+    asciidoc_html = 'xhtml5'
+else
+    asciidoc = find_program('asciidoc')
+    asciidoc_extra  = ['--unsafe']
+    asciidoc_extra += ['-f', conf_dir + 'asciidoc.conf']
+    asciidoc_html = 'xhtml11'
+
+    r = run_command(asciidoc, '--version', check: true)
+    v = r.stdout().strip()
+    if v.version_compare('>=8.0')
+        asciidoc_extra += ['-a', 'asciidoc7compatible']
+    endif
+endif
+
+manpage_xsl = conf_dir + 'manpage-normal.xsl'
+
+if get_option('docbook-xls-172')
+    asciidoc_extra += ['-a', 'libtraceevent-asciidoc-no-roff']
+    manpage_xsl = conf_dir + 'manpage-1.72.xsl'
+elif get_option('asciidoc-no-roff')
+    # docbook-xsl after 1.72 needs the regular XSL, but will not
+    # pass-thru raw roff codes from asciidoc.conf, so turn them off.
+    asciidoc_extra += ['-a', 'libtraceevent-asciidoc-no-roff']
+endif
+
+xmlto = find_program('xmlto')
+xmlto_extra = []
+
+if get_option('man-bold-literal')
+    xmlto_extra += ['-m ', conf_dir + 'manpage-bold-literal.xsl']
+endif
+
+if get_option('docbook-suppress-sp')
+    xmlto_extra += ['-m ',  conf_dir + 'manpage-suppress-sp.xsl']
+endif
+
+check_doc = custom_target(
+    'check-doc',
+    output: 'dummy',
+    command : [
+        top_source_dir + 'check-manpages.sh',
+        meson.current_source_dir()])
+
+gen = generator(
+    asciidoc,
+    output: '@BASENAME@.xml',
+    arguments: [
+        '-b', 'docbook',
+        '-d', 'manpage',
+        '-a', 'libtraceevent_version=' + meson.project_version(),
+        '-o', '@OUTPUT@']
+        + asciidoc_extra
+        +  ['@INPUT@'])
+
+man = []
+html = []
+foreach txt, section : sources
+    # build man page(s)
+    xml = gen.process(txt)
+    man += custom_target(
+        txt.underscorify() + '_man',
+        input: xml,
+        output: '@BASENAME@.' + section,
+        depends: check_doc,
+        command: [
+            xmlto,
+            '-m', manpage_xsl,
+            'man',
+            '-o', '@OUTPUT@']
+            + xmlto_extra
+            + ['@INPUT@'])
+
+    # build html pages
+    html += custom_target(
+        txt.underscorify() + '_html',
+        input: txt,
+        output: '@BASENAME@.html',
+        depends: check_doc,
+        command: [
+            asciidoc,
+            '-b', asciidoc_html,
+            '-d', 'manpage',
+            '-a', 'libtraceevent_version=' + meson.project_version(),
+            '-o', '@OUTPUT@']
+            + asciidoc_extra
+            + ['@INPUT@'])
+endforeach
+
+# Install path workaround because:
+#
+# - xmlto might generate more than one file and we would to tell meson
+#   about those output files. We could figure out which files are generated
+#   (see sed match in check-manpages.sh).
+#
+# - The man page generation puts all the generated files under sub dirs
+#   and it's not obvious how to tell Meson it should not do this without
+#   causing the install step to fail (confusion where the generated files
+#   are stored)
+#
+# - The documentation build is not part of the 'build' target. The user
+#   has explicitly to trigger the doc build. Hence the documentation is
+#   not added to the 'install' target.
+#
+# Thus just use a plain old shell script to move the generated files to the
+# right location.
+
+conf = configuration_data()
+conf.set('SRCDIR', meson.current_build_dir())
+conf.set('MANDIR', mandir)
+conf.set('HTMLDIR', htmldir)
+configure_file(
+    input: 'install-docs.sh.in',
+    output: 'install-docs.sh',
+    configuration: conf)
+
+meson.add_install_script(
+    join_paths(meson.current_build_dir(), 'install-docs.sh'))
diff --git a/include/meson.build b/include/meson.build
new file mode 100644
index 000000000000..52db432c8275
--- /dev/null
+++ b/include/meson.build
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: LGPL-2.1
+#
+# Copyright (c) 2023 Daniel Wagner, SUSE LLC
+
+headers = [
+   'tracefs.h',
+]
+
+foreach h : headers
+    install_headers(h, subdir : 'libtracefs')
+endforeach
diff --git a/meson.build b/meson.build
new file mode 100644
index 000000000000..e793cfc16e14
--- /dev/null
+++ b/meson.build
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: LGPL-2.1
+#
+# Copyright (c) 2023 Daniel Wagner, SUSE LLC
+
+project(
+    'libtracefs', ['c'],
+    meson_version: '>= 0.50.0',
+    license: 'LGPL-2.1',
+    version: '1.6.3',
+    default_options: [
+        'c_std=gnu99',
+        'buildtype=debug',
+        'default_library=both',
+        'prefix=/usr/local',
+        'warning_level=1'])
+
+library_version = meson.project_version()
+
+libtraceevent_dep = dependency('libtraceevent', version: '>= 1.7.0', required: true)
+cunit_dep = dependency('cunit', required : false)
+
+prefixdir = get_option('prefix')
+bindir = join_paths(prefixdir, get_option('bindir'))
+mandir = join_paths(prefixdir, get_option('mandir'))
+htmldir = join_paths(prefixdir, get_option('htmldir'))
+
+add_project_arguments(
+    [
+        '-D_GNU_SOURCE',
+    ],
+    language : 'c')
+
+incdir = include_directories(['include'])
+
+subdir('src')
+subdir('include')
+if cunit_dep.found()
+    subdir('utest')
+endif
+subdir('samples')
+subdir('Documentation')
+
+custom_target(
+    'docs',
+    output: 'docs',
+    depends: [html, man],
+    command: ['echo'])
diff --git a/meson_options.txt b/meson_options.txt
new file mode 100644
index 000000000000..51142aaadedf
--- /dev/null
+++ b/meson_options.txt
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: LGPL-2.1
+#
+# Copyright (c) 2023 Daniel Wagner, SUSE LLC
+
+option('htmldir', type : 'string', value : '',
+       description : 'directory for HTML documentation')
+option('asciidoctor', type : 'boolean', value: false,
+       description : 'use asciidoctor instead of asciidoc')
+option('docbook-xls-172', type : 'boolean', value : false,
+       description : 'enable docbook XLS 172 workaround')
+option('asciidoc-no-roff', type : 'boolean', value : false,
+       description : 'enable no roff workaround')
+option('man-bold-literal', type : 'boolean', value : false,
+       description : 'enable bold literals')
+option('docbook-suppress-sp', type : 'boolean', value : false,
+       description : 'docbook suppress sp')
diff --git a/samples/extract-example.sh b/samples/extract-example.sh
new file mode 100644
index 000000000000..c5c0f702e7f0
--- /dev/null
+++ b/samples/extract-example.sh
@@ -0,0 +1,3 @@
+#!/bin/bash
+
+cat $1 | sed -ne '/^EXAMPLE/,/FILES/ { /EXAMPLE/,+2d ; /^FILES/d ;  /^--/d ; p}' > $2
diff --git a/samples/meson.build b/samples/meson.build
new file mode 100644
index 000000000000..5e8ad270f812
--- /dev/null
+++ b/samples/meson.build
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: LGPL-2.1
+#
+# Copyright (c) 2023 Daniel Wagner, SUSE LLC
+
+examples = [
+    'dynevents',
+    'kprobes',
+    'eprobes',
+    'uprobes',
+    'synth',
+    'error',
+    'filter',
+    'function-filter',
+    'hist',
+    'hist-cont',
+    'tracer',
+    'stream',
+    'instances-affinity',
+    'cpu',
+]
+
+extract_examples = find_program('extract-example.sh')
+gen = generator(
+   extract_examples,
+   output: '@BASENAME@.c',
+   arguments: ['@INPUT@', '@OUTPUT@'])
+
+foreach ex : examples
+    src = gen.process(meson.current_source_dir() + '/../Documentation/libtracefs-@0@.txt'.format(ex))
+    executable(
+        ex.underscorify(),
+        src,
+        dependencies: [libtracefs_dep, libtraceevent_dep],
+        include_directories: [incdir])
+endforeach
+
+# sqlhist is unique and stands on its own
+src = gen.process(meson.current_source_dir() + '/../Documentation/libtracefs-sql.txt')
+executable(
+   'sqlhist',
+   src,
+   dependencies: [libtracefs_dep, libtraceevent_dep],
+   include_directories: [incdir],
+   install: true,
+   install_dir: bindir)
diff --git a/src/meson.build b/src/meson.build
new file mode 100644
index 000000000000..2b76335d65b9
--- /dev/null
+++ b/src/meson.build
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: LGPL-2.1
+#
+# Copyright (c) 2023 Daniel Wagner, SUSE LLC
+
+sources= [
+   'tracefs-dynevents.c',
+   'tracefs-eprobes.c',
+   'tracefs-events.c',
+   'tracefs-filter.c',
+   'tracefs-hist.c',
+   'tracefs-instance.c',
+   'tracefs-kprobes.c',
+   'tracefs-marker.c',
+   'tracefs-record.c',
+   'tracefs-sqlhist.c',
+   'tracefs-tools.c',
+   'tracefs-uprobes.c',
+   'tracefs-utils.c',
+]
+
+flex = find_program('flex', required: true)
+bison = find_program('bison', required: true)
+
+lgen = generator(flex,
+output : '@PLAINNAME@.yy.c',
+arguments : ['-o', '@OUTPUT@', '@INPUT@'])
+
+pgen = generator(bison,
+output : ['@BASENAME@.tab.c', '@BASENAME@.tab.h'],
+arguments : ['@INPUT@', '--defines=@OUTPUT1@', '--output=@OUTPUT0@'])
+
+lfiles = lgen.process('sqlhist.l')
+pfiles = pgen.process('sqlhist.y')
+
+libtracefs = library(
+    'tracefs',
+    sources, lfiles, pfiles,
+    version: library_version,
+    dependencies: [libtraceevent_dep],
+    include_directories: [incdir],
+    install: true)
+
+libtracefs_static = static_library(
+    'tracefs_static',
+    sources, lfiles, pfiles,
+    dependencies: [libtraceevent_dep],
+    include_directories: [incdir],
+    install: false)
+
+pkg = import('pkgconfig')
+pkg.generate(
+    libtracefs,
+    subdirs: 'libtracefs',
+    filebase: meson.project_name(),
+    name: meson.project_name(),
+    version: meson.project_version(),
+    description: 'Manage trace fs',
+    url: 'https://git.kernel.org/pub/scm/libs/libtrace/libtracefs.git/')
+
+libtracefs_dep = declare_dependency(
+    include_directories: ['.'],
+    link_with: libtracefs)
diff --git a/utest/meson.build b/utest/meson.build
new file mode 100644
index 000000000000..91a526fca2bf
--- /dev/null
+++ b/utest/meson.build
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: LGPL-2.1
+#
+# Copyright (c) 2023 Daniel Wagner, SUSE LLC
+
+source = [
+    'trace-utest.c',
+    'tracefs-utest.c',
+]
+
+e = executable(
+   'trace-utest',
+   source,
+   include_directories: [incdir],
+   dependencies: [libtraceevent_dep, cunit_dep],
+   link_with: libtracefs_static)
+
+test('trace-utest', e)
-- 
2.39.0




[Index of Archives]     [Linux USB Development]     [Linux USB Development]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux