The following commit has been merged into the irq/core branch of tip:
Commit-ID: e749df1bbd23f4472082210650514548d8a39e9b
Gitweb: https://git.kernel.org/tip/e749df1bbd23f4472082210650514548d8a39e9b
Author: Barry Song <song.bao.hua@xxxxxxxxxxxxx>
AuthorDate: Wed, 03 Mar 2021 11:49:15 +13:00
Committer: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
CommitterDate: Thu, 04 Mar 2021 11:47:52 +01:00
genirq: Add IRQF_NO_AUTOEN for request_irq/nmi()
Many drivers don't want interrupts enabled automatically via request_irq().
So they are handling this issue by either way of the below two:
(1)
irq_set_status_flags(irq, IRQ_NOAUTOEN);
request_irq(dev, irq...);
(2)
request_irq(dev, irq...);
disable_irq(irq);
The code in the second way is silly and unsafe. In the small time gap
between request_irq() and disable_irq(), interrupts can still come.
The code in the first way is safe though it's subobtimal.
Add a new IRQF_NO_AUTOEN flag which can be handed in by drivers to
request_irq() and request_nmi(). It prevents the automatic enabling of the
requested interrupt/nmi in the same safe way as #1 above. With that the
various usage sites of #1 and #2 above can be simplified and corrected.
Signed-off-by: Barry Song <song.bao.hua@xxxxxxxxxxxxx>
Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: dmitry.torokhov@xxxxxxxxx
Link: https://lore.kernel.org/r/20210302224916.13980-2-song.bao.hua@xxxxxxxxxxxxx
---
include/linux/interrupt.h | 4 ++++
kernel/irq/manage.c | 11 +++++++++--
2 files changed, 13 insertions(+), 2 deletions(-)
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index 967e257..76f1161 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -61,6 +61,9 @@
* interrupt handler after suspending interrupts. For system
* wakeup devices users need to implement wakeup detection in
* their interrupt handlers.
+ * IRQF_NO_AUTOEN - Don't enable IRQ or NMI automatically when users request it.
+ * Users will enable it explicitly by enable_irq() or enable_nmi()
+ * later.
*/
#define IRQF_SHARED 0x00000080
#define IRQF_PROBE_SHARED 0x00000100
@@ -74,6 +77,7 @@
#define IRQF_NO_THREAD 0x00010000
#define IRQF_EARLY_RESUME 0x00020000
#define IRQF_COND_SUSPEND 0x00040000
+#define IRQF_NO_AUTOEN 0x00080000
#define IRQF_TIMER (__IRQF_TIMER | IRQF_NO_SUSPEND | IRQF_NO_THREAD)
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index dec3f73..97c231a 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -1693,7 +1693,8 @@ __setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new)
irqd_set(&desc->irq_data, IRQD_NO_BALANCING);
}
- if (irq_settings_can_autoenable(desc)) {
+ if (!(new->flags & IRQF_NO_AUTOEN) &&
+ irq_settings_can_autoenable(desc)) {
irq_startup(desc, IRQ_RESEND, IRQ_START_COND);
} else {
/*
@@ -2086,10 +2087,15 @@ int request_threaded_irq(unsigned int irq, irq_handler_t handler,
* which interrupt is which (messes up the interrupt freeing
* logic etc).
*
+ * Also shared interrupts do not go well with disabling auto enable.
+ * The sharing interrupt might request it while it's still disabled
+ * and then wait for interrupts forever.
+ *
* Also IRQF_COND_SUSPEND only makes sense for shared interrupts and
* it cannot be set along with IRQF_NO_SUSPEND.
*/
if (((irqflags & IRQF_SHARED) && !dev_id) ||
+ ((irqflags & IRQF_SHARED) && (irqflags & IRQF_NO_AUTOEN)) ||
(!(irqflags & IRQF_SHARED) && (irqflags & IRQF_COND_SUSPEND)) ||
((irqflags & IRQF_NO_SUSPEND) && (irqflags & IRQF_COND_SUSPEND)))
return -EINVAL;
@@ -2245,7 +2251,8 @@ int request_nmi(unsigned int irq, irq_handler_t handler,
desc = irq_to_desc(irq);
- if (!desc || irq_settings_can_autoenable(desc) ||
+ if (!desc || (irq_settings_can_autoenable(desc) &&
+ !(irqflags & IRQF_NO_AUTOEN)) ||
!irq_settings_can_request(desc) ||
WARN_ON(irq_settings_is_per_cpu_devid(desc)) ||
!irq_supports_nmi(desc))
|