The following commit has been merged into the timers/core branch of tip: Commit-ID: e1922b5da0e6869f1850c4447bed0b9cb1cf5034 Gitweb: https://git.kernel.org/tip/e1922b5da0e6869f1850c4447bed0b9cb1cf5034 Author: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx> AuthorDate: Fri, 08 Jan 2021 17:30:04 +01:00 Committer: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx> CommitterDate: Mon, 18 Jan 2021 16:33:51 +01:00 dt-bindings: timer: nuvoton: Clarify that interrupt of timer 0 should be specified The NPCM750 Timer/Watchdog Controller has multiple interrupt lines, connected to multiple timers. The driver uses timer 0 for timer interrupts, so the interrupt line corresponding to timer 0 should be specified in DT. I removed the mention of "flags for falling edge", because the timer controller uses high-level interrupts rather than falling-edge interrupts, and whether flags should be specified is up the interrupt controller's DT binding. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx> Acked-by: Rob Herring <robh@xxxxxxxxxx> Signed-off-by: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx> Link: https://lore.kernel.org/r/20210108163004.492649-1-j.neuschaefer@xxxxxxx --- Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt index ea22dfe..97258f1 100644 --- a/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt +++ b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt @@ -6,8 +6,7 @@ timer counters. Required properties: - compatible : "nuvoton,npcm750-timer" for Poleg NPCM750. - reg : Offset and length of the register set for the device. -- interrupts : Contain the timer interrupt with flags for - falling edge. +- interrupts : Contain the timer interrupt of timer 0. - clocks : phandle of timer reference clock (usually a 25 MHz clock). Example:
![]() |