The following commit has been merged into the perf/core branch of tip:
Commit-ID: 3a6c51e4d66cf2fbc05583247b2d2f1179e8a74c
Gitweb: https://git.kernel.org/tip/3a6c51e4d66cf2fbc05583247b2d2f1179e8a74c
Author: Jiri Olsa <jolsa@xxxxxxxxxx>
AuthorDate: Fri, 17 Apr 2020 00:14:05 +02:00
Committer: Arnaldo Carvalho de Melo <acme@xxxxxxxxxx>
CommitterDate: Sat, 18 Apr 2020 09:05:00 -03:00
perf parser: Add support to specify rXXX event with pmu
The current rXXXX event specification creates event under PERF_TYPE_RAW
pmu type. This change allows to use rXXXX within pmu syntax, so it's
type is used via the following syntax:
-e 'cpu/r3c/'
-e 'cpum_cf/r0/'
The XXXX number goes directly to perf_event_attr::config the same way as
in '-e rXXXX' event. The perf_event_attr::type is filled with pmu type.
Committer testing:
So, lets see what goes in perf_event_attr::config for, say, the
'instructions' PERF_TYPE_HARDWARE (0) event, first we should look at how
to encode this event as a PERF_TYPE_RAW event for this specific CPU, an
AMD Ryzen 5:
# cat /sys/devices/cpu/events/instructions
event=0xc0
#
Then try with it _and_ the instruction, just to see that they are close
enough:
# perf stat -e rc0,instructions sleep 1
Performance counter stats for 'sleep 1':
919,794 rc0
919,898 instructions
1.000754579 seconds time elapsed
0.000715000 seconds user
0.000000000 seconds sys
#
Now we should try, before this patch, the PMU event encoding:
# perf stat -e cpu/rc0/ sleep 1
event syntax error: 'cpu/rc0/'
\___ unknown term
valid terms: event,edge,inv,umask,cmask,config,config1,config2,name,period,percore
#
Now with this patch, the three ways of specifying the 'instructions' CPU
counter are accepted:
# perf stat -e cpu/rc0/,rc0,instructions sleep 1
Performance counter stats for 'sleep 1':
892,948 cpu/rc0/
893,052 rc0
893,156 instructions
1.000931819 seconds time elapsed
0.000916000 seconds user
0.000000000 seconds sys
#
Requested-by: Thomas Richter <tmricht@xxxxxxxxxxxxx>
Signed-off-by: Jiri Olsa <jolsa@xxxxxxxxxx>
Tested-by: Arnaldo Carvalho de Melo <acme@xxxxxxxxxx>
Tested-by: Thomas Richter <tmricht@xxxxxxxxxxxxx>
Cc: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
Cc: Michael Petlan <mpetlan@xxxxxxxxxx>
Cc: Namhyung Kim <namhyung@xxxxxxxxxx>
Cc: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
Cc: Sumanth Korikkar <sumanthk@xxxxxxxxxxxxx>
Cc: Vasily Gorbik <gor@xxxxxxxxxxxxx>
Link: http://lore.kernel.org/lkml/20200416221405.437788-1-jolsa@xxxxxxxxxx
Signed-off-by: Arnaldo Carvalho de Melo <acme@xxxxxxxxxx>
---
tools/perf/Documentation/perf-list.txt | 5 +++++
tools/perf/tests/parse-events.c | 17 ++++++++++++++++-
tools/perf/util/parse-events.l | 1 +
tools/perf/util/parse-events.y | 9 +++++++++
4 files changed, 31 insertions(+), 1 deletion(-)
diff --git a/tools/perf/Documentation/perf-list.txt b/tools/perf/Documentation/perf-list.txt
index cb23667..376a50b 100644
--- a/tools/perf/Documentation/perf-list.txt
+++ b/tools/perf/Documentation/perf-list.txt
@@ -115,6 +115,11 @@ raw encoding of 0x1A8 can be used:
perf stat -e r1a8 -a sleep 1
perf record -e r1a8 ...
+It's also possible to use pmu syntax:
+
+ perf record -e r1a8 -a sleep 1
+ perf record -e cpu/r1a8/ ...
+
You should refer to the processor specific documentation for getting these
details. Some of them are referenced in the SEE ALSO section below.
diff --git a/tools/perf/tests/parse-events.c b/tools/perf/tests/parse-events.c
index 091c3ae..902bd9d 100644
--- a/tools/perf/tests/parse-events.c
+++ b/tools/perf/tests/parse-events.c
@@ -1356,6 +1356,16 @@ static int test__checkevent_complex_name(struct evlist *evlist)
return 0;
}
+static int test__checkevent_raw_pmu(struct evlist *evlist)
+{
+ struct evsel *evsel = evlist__first(evlist);
+
+ TEST_ASSERT_VAL("wrong number of entries", 1 == evlist->core.nr_entries);
+ TEST_ASSERT_VAL("wrong type", PERF_TYPE_SOFTWARE == evsel->core.attr.type);
+ TEST_ASSERT_VAL("wrong config", 0x1a == evsel->core.attr.config);
+ return 0;
+}
+
static int test__sym_event_slash(struct evlist *evlist)
{
struct evsel *evsel = evlist__first(evlist);
@@ -1750,7 +1760,12 @@ static struct evlist_test test__events_pmu[] = {
.name = "cpu/name='COMPLEX_CYCLES_NAME:orig=cycles,desc=chip-clock-ticks',period=0x1,event=0x2/ukp",
.check = test__checkevent_complex_name,
.id = 3,
- }
+ },
+ {
+ .name = "software/r1a/",
+ .check = test__checkevent_raw_pmu,
+ .id = 4,
+ },
};
struct terms_test {
diff --git a/tools/perf/util/parse-events.l b/tools/perf/util/parse-events.l
index baa48f2..c589fc4 100644
--- a/tools/perf/util/parse-events.l
+++ b/tools/perf/util/parse-events.l
@@ -286,6 +286,7 @@ no-overwrite { return term(yyscanner, PARSE_EVENTS__TERM_TYPE_NOOVERWRITE); }
percore { return term(yyscanner, PARSE_EVENTS__TERM_TYPE_PERCORE); }
aux-output { return term(yyscanner, PARSE_EVENTS__TERM_TYPE_AUX_OUTPUT); }
aux-sample-size { return term(yyscanner, PARSE_EVENTS__TERM_TYPE_AUX_SAMPLE_SIZE); }
+r{num_raw_hex} { return raw(yyscanner); }
, { return ','; }
"/" { BEGIN(INITIAL); return '/'; }
{name_minus} { return str(yyscanner, PE_NAME); }
diff --git a/tools/perf/util/parse-events.y b/tools/perf/util/parse-events.y
index 94f8bcd..e879eb2 100644
--- a/tools/perf/util/parse-events.y
+++ b/tools/perf/util/parse-events.y
@@ -706,6 +706,15 @@ event_term
}
event_term:
+PE_RAW
+{
+ struct parse_events_term *term;
+
+ ABORT_ON(parse_events_term__num(&term, PARSE_EVENTS__TERM_TYPE_CONFIG,
+ NULL, $1, false, &@1, NULL));
+ $$ = term;
+}
+|
PE_NAME '=' PE_NAME
{
struct parse_events_term *term;
|