Commit-ID: cdf6179630a5aa877fba986e1c5dc91f2285eb08
Gitweb: https://git.kernel.org/tip/cdf6179630a5aa877fba986e1c5dc91f2285eb08
Author: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
AuthorDate: Mon, 10 Dec 2018 23:05:39 +0530
Committer: Marc Zyngier <marc.zyngier@xxxxxxx>
CommitDate: Thu, 13 Dec 2018 09:35:56 +0000
dt-bindings: interrupt-controller: Document RDA8810PL intc
Document interrupt controller in RDA Micro RDA8810PL SoC.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Marc Zyngier <marc.zyngier@xxxxxxx>
---
.../interrupt-controller/rda,8810pl-intc.txt | 61 ++++++++++++++++++++++
1 file changed, 61 insertions(+)
diff --git a/Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.txt
new file mode 100644
index 000000000000..e0062aebf025
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.txt
@@ -0,0 +1,61 @@
+RDA Micro RDA8810PL Interrupt Controller
+
+The interrupt controller in RDA8810PL SoC is a custom interrupt controller
+which supports up to 32 interrupts.
+
+Required properties:
+
+- compatible: Should be "rda,8810pl-intc".
+- reg: Specifies base physical address of the registers set.
+- interrupt-controller: Identifies the node as an interrupt controller.
+- #interrupt-cells: Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 2.
+
+The interrupt sources are as follows:
+
+ID Name
+------------
+0: PULSE_DUMMY
+1: I2C
+2: NAND_NFSC
+3: SDMMC1
+4: SDMMC2
+5: SDMMC3
+6: SPI1
+7: SPI2
+8: SPI3
+9: UART1
+10: UART2
+11: UART3
+12: GPIO1
+13: GPIO2
+14: GPIO3
+15: KEYPAD
+16: TIMER
+17: TIMEROS
+18: COMREG0
+19: COMREG1
+20: USB
+21: DMC
+22: DMA
+23: CAMERA
+24: GOUDA
+25: GPU
+26: VPU_JPG
+27: VPU_HOST
+28: VOC
+29: AUIFC0
+30: AUIFC1
+31: L2CC
+
+Example:
+ apb@20800000 {
+ compatible = "simple-bus";
+ ...
+ intc: interrupt-controller@0 {
+ compatible = "rda,8810pl-intc";
+ reg = <0x0 0x1000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
|