Commit-ID: 535b9552bb81eebe112ee7bd34ee498857b0c26b
Gitweb: http://git.kernel.org/tip/535b9552bb81eebe112ee7bd34ee498857b0c26b
Author: Ingo Molnar <mingo@xxxxxxxxxx>
AuthorDate: Wed, 1 Feb 2017 12:29:21 +0100
Committer: Ingo Molnar <mingo@xxxxxxxxxx>
CommitDate: Tue, 7 Feb 2017 10:58:01 +0100
sched/rq_clock: Consolidate the ordering of the rq_clock methods
update_rq_clock_task() and update_rq_clock() we unnecessarily
spread across core.c, requiring an extra prototype line.
Move them next to each other and in the proper order.
Cc: Mike Galbraith <efault@xxxxxx>
Cc: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: linux-kernel@xxxxxxxxxxxxxxx
Signed-off-by: Ingo Molnar <mingo@xxxxxxxxxx>
---
kernel/sched/core.c | 153 ++++++++++++++++++++++++++--------------------------
1 file changed, 78 insertions(+), 75 deletions(-)
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 87cf7ba..a400190 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -73,27 +73,6 @@
DEFINE_MUTEX(sched_domains_mutex);
DEFINE_PER_CPU_SHARED_ALIGNED(struct rq, runqueues);
-static void update_rq_clock_task(struct rq *rq, s64 delta);
-
-void update_rq_clock(struct rq *rq)
-{
- s64 delta;
-
- lockdep_assert_held(&rq->lock);
-
- if (rq->clock_update_flags & RQCF_ACT_SKIP)
- return;
-
-#ifdef CONFIG_SCHED_DEBUG
- rq->clock_update_flags |= RQCF_UPDATED;
-#endif
- delta = sched_clock_cpu(cpu_of(rq)) - rq->clock;
- if (delta < 0)
- return;
- rq->clock += delta;
- update_rq_clock_task(rq, delta);
-}
-
/*
* Debugging: various feature bits
*/
@@ -218,6 +197,84 @@ struct rq *task_rq_lock(struct task_struct *p, struct rq_flags *rf)
}
}
+/*
+ * RQ-clock updating methods:
+ */
+
+static void update_rq_clock_task(struct rq *rq, s64 delta)
+{
+/*
+ * In theory, the compile should just see 0 here, and optimize out the call
+ * to sched_rt_avg_update. But I don't trust it...
+ */
+#if defined(CONFIG_IRQ_TIME_ACCOUNTING) || defined(CONFIG_PARAVIRT_TIME_ACCOUNTING)
+ s64 steal = 0, irq_delta = 0;
+#endif
+#ifdef CONFIG_IRQ_TIME_ACCOUNTING
+ irq_delta = irq_time_read(cpu_of(rq)) - rq->prev_irq_time;
+
+ /*
+ * Since irq_time is only updated on {soft,}irq_exit, we might run into
+ * this case when a previous update_rq_clock() happened inside a
+ * {soft,}irq region.
+ *
+ * When this happens, we stop ->clock_task and only update the
+ * prev_irq_time stamp to account for the part that fit, so that a next
+ * update will consume the rest. This ensures ->clock_task is
+ * monotonic.
+ *
+ * It does however cause some slight miss-attribution of {soft,}irq
+ * time, a more accurate solution would be to update the irq_time using
+ * the current rq->clock timestamp, except that would require using
+ * atomic ops.
+ */
+ if (irq_delta > delta)
+ irq_delta = delta;
+
+ rq->prev_irq_time += irq_delta;
+ delta -= irq_delta;
+#endif
+#ifdef CONFIG_PARAVIRT_TIME_ACCOUNTING
+ if (static_key_false((¶virt_steal_rq_enabled))) {
+ steal = paravirt_steal_clock(cpu_of(rq));
+ steal -= rq->prev_steal_time_rq;
+
+ if (unlikely(steal > delta))
+ steal = delta;
+
+ rq->prev_steal_time_rq += steal;
+ delta -= steal;
+ }
+#endif
+
+ rq->clock_task += delta;
+
+#if defined(CONFIG_IRQ_TIME_ACCOUNTING) || defined(CONFIG_PARAVIRT_TIME_ACCOUNTING)
+ if ((irq_delta + steal) && sched_feat(NONTASK_CAPACITY))
+ sched_rt_avg_update(rq, irq_delta + steal);
+#endif
+}
+
+void update_rq_clock(struct rq *rq)
+{
+ s64 delta;
+
+ lockdep_assert_held(&rq->lock);
+
+ if (rq->clock_update_flags & RQCF_ACT_SKIP)
+ return;
+
+#ifdef CONFIG_SCHED_DEBUG
+ rq->clock_update_flags |= RQCF_UPDATED;
+#endif
+ delta = sched_clock_cpu(cpu_of(rq)) - rq->clock;
+ if (delta < 0)
+ return;
+ rq->clock += delta;
+ update_rq_clock_task(rq, delta);
+}
+
+
#ifdef CONFIG_SCHED_HRTICK
/*
* Use HR-timers to deliver accurate preemption points.
@@ -767,60 +824,6 @@ void deactivate_task(struct rq *rq, struct task_struct *p, int flags)
dequeue_task(rq, p, flags);
}
-static void update_rq_clock_task(struct rq *rq, s64 delta)
-{
-/*
- * In theory, the compile should just see 0 here, and optimize out the call
- * to sched_rt_avg_update. But I don't trust it...
- */
-#if defined(CONFIG_IRQ_TIME_ACCOUNTING) || defined(CONFIG_PARAVIRT_TIME_ACCOUNTING)
- s64 steal = 0, irq_delta = 0;
-#endif
-#ifdef CONFIG_IRQ_TIME_ACCOUNTING
- irq_delta = irq_time_read(cpu_of(rq)) - rq->prev_irq_time;
-
- /*
- * Since irq_time is only updated on {soft,}irq_exit, we might run into
- * this case when a previous update_rq_clock() happened inside a
- * {soft,}irq region.
- *
- * When this happens, we stop ->clock_task and only update the
- * prev_irq_time stamp to account for the part that fit, so that a next
- * update will consume the rest. This ensures ->clock_task is
- * monotonic.
- *
- * It does however cause some slight miss-attribution of {soft,}irq
- * time, a more accurate solution would be to update the irq_time using
- * the current rq->clock timestamp, except that would require using
- * atomic ops.
- */
- if (irq_delta > delta)
- irq_delta = delta;
-
- rq->prev_irq_time += irq_delta;
- delta -= irq_delta;
-#endif
-#ifdef CONFIG_PARAVIRT_TIME_ACCOUNTING
- if (static_key_false((¶virt_steal_rq_enabled))) {
- steal = paravirt_steal_clock(cpu_of(rq));
- steal -= rq->prev_steal_time_rq;
-
- if (unlikely(steal > delta))
- steal = delta;
-
- rq->prev_steal_time_rq += steal;
- delta -= steal;
- }
-#endif
-
- rq->clock_task += delta;
-
-#if defined(CONFIG_IRQ_TIME_ACCOUNTING) || defined(CONFIG_PARAVIRT_TIME_ACCOUNTING)
- if ((irq_delta + steal) && sched_feat(NONTASK_CAPACITY))
- sched_rt_avg_update(rq, irq_delta + steal);
-#endif
-}
-
void sched_set_stop_task(int cpu, struct task_struct *stop)
{
struct sched_param param = { .sched_priority = MAX_RT_PRIO - 1 };
--
To unsubscribe from this list: send the line "unsubscribe linux-tip-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
|