[tip:x86/nuke-platforms] x86, platforms: Remove SGI Visual Workstation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Commit-ID:  c5f9ee3d665a7660b296aa1e91949ae3376f0d07
Gitweb:     http://git.kernel.org/tip/c5f9ee3d665a7660b296aa1e91949ae3376f0d07
Author:     H. Peter Anvin <hpa@xxxxxxxxxxxxxxx>
AuthorDate: Tue, 25 Feb 2014 12:05:34 -0800
Committer:  H. Peter Anvin <hpa@xxxxxxxxxxxxxxx>
CommitDate: Thu, 27 Feb 2014 08:07:39 -0800

x86, platforms: Remove SGI Visual Workstation

The SGI Visual Workstation seems to be dead; remove support so we
don't have to continue maintaining it.

Cc: Andrey Panin <pazke@xxxxxxxxx>
Cc: Michael Reed <mdr@xxxxxxx>
Link: http://lkml.kernel.org/r/530CFD6C.7040705@xxxxxxxxx
Signed-off-by: H. Peter Anvin <hpa@xxxxxxxxxxxxxxx>
---
 Documentation/00-INDEX                 |    2 -
 Documentation/sgi-visws.txt            |   13 -
 Documentation/sound/oss/vwsnd          |  293 ---
 MAINTAINERS                            |    7 -
 arch/x86/Kconfig                       |   17 -
 arch/x86/include/asm/fixmap.h          |    6 -
 arch/x86/include/asm/hw_irq.h          |    1 -
 arch/x86/include/asm/setup.h           |    6 -
 arch/x86/include/asm/visws/cobalt.h    |  127 --
 arch/x86/include/asm/visws/lithium.h   |   53 -
 arch/x86/include/asm/visws/piix4.h     |  107 -
 arch/x86/include/asm/visws/sgivw.h     |    5 -
 arch/x86/kernel/apic/apic.c            |    1 -
 arch/x86/kernel/setup.c                |    1 -
 arch/x86/pci/Makefile                  |    2 -
 arch/x86/pci/common.c                  |    5 +-
 arch/x86/pci/visws.c                   |   87 -
 arch/x86/platform/Makefile             |    1 -
 arch/x86/platform/visws/Makefile       |    1 -
 arch/x86/platform/visws/visws_quirks.c |  608 ------
 arch/x86/xen/Kconfig                   |    2 +-
 drivers/pci/Makefile                   |    1 -
 drivers/scsi/qla1280.c                 |    7 -
 drivers/video/Kconfig                  |   11 +-
 drivers/video/Makefile                 |    1 -
 drivers/video/gbefb.c                  |    4 -
 drivers/video/logo/Kconfig             |    2 +-
 drivers/video/logo/logo.c              |    2 +-
 drivers/video/sgivwfb.c                |  889 --------
 include/video/sgivw.h                  |  681 -------
 sound/oss/Kconfig                      |    9 -
 sound/oss/Makefile                     |    1 -
 sound/oss/vwsnd.c                      | 3506 --------------------------------
 33 files changed, 5 insertions(+), 6454 deletions(-)

diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX
index 38f8444..ad6c290 100644
--- a/Documentation/00-INDEX
+++ b/Documentation/00-INDEX
@@ -401,8 +401,6 @@ serial-console.txt
 	- how to set up Linux with a serial line console as the default.
 sgi-ioc4.txt
 	- description of the SGI IOC4 PCI (multi function) device.
-sgi-visws.txt
-	- short blurb on the SGI Visual Workstations.
 sh/
 	- directory with info on porting Linux to a new architecture.
 smsc_ece1099.txt
diff --git a/Documentation/sgi-visws.txt b/Documentation/sgi-visws.txt
deleted file mode 100644
index 7ff0811..0000000
--- a/Documentation/sgi-visws.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-
-The SGI Visual Workstations (models 320 and 540) are based around
-the Cobalt, Lithium, and Arsenic ASICs.  The Cobalt ASIC is the
-main system ASIC which interfaces the 1-4 IA32 cpus, the memory
-system, and the I/O system in the Lithium ASIC.  The Cobalt ASIC
-also contains the 3D gfx rendering engine which renders to main
-system memory -- part of which is used as the frame buffer which
-is DMA'ed to a video connector using the Arsenic ASIC.  A PIIX4
-chip and NS87307 are used to provide legacy device support (IDE,
-serial, floppy, and parallel).
-
-The Visual Workstation chipset largely conforms to the PC architecture
-with some notable exceptions such as interrupt handling.
diff --git a/Documentation/sound/oss/vwsnd b/Documentation/sound/oss/vwsnd
deleted file mode 100644
index 4c6cbdb..0000000
--- a/Documentation/sound/oss/vwsnd
+++ /dev/null
@@ -1,293 +0,0 @@
-vwsnd - Sound driver for the Silicon Graphics 320 and 540 Visual
-Workstations' onboard audio.
-
-Copyright 1999 Silicon Graphics, Inc.  All rights reserved.
-
-
-At the time of this writing, March 1999, there are two models of
-Visual Workstation, the 320 and the 540.  This document only describes
-those models.  Future Visual Workstation models may have different
-sound capabilities, and this driver will probably not work on those
-boxes.
-
-The Visual Workstation has an Analog Devices AD1843 "SoundComm" audio
-codec chip.  The AD1843 is accessed through the Cobalt I/O ASIC, also
-known as Lithium.  This driver programs both chips.
-
-==============================================================================
-QUICK CONFIGURATION
-
-	# insmod soundcore
-	# insmod vwsnd
-
-==============================================================================
-I/O CONNECTIONS
-
-On the Visual Workstation, only three of the AD1843 inputs are hooked
-up.  The analog line in jacks are connected to the AD1843's AUX1
-input.  The CD audio lines are connected to the AD1843's AUX2 input.
-The microphone jack is connected to the AD1843's MIC input.  The mic
-jack is mono, but the signal is delivered to both the left and right
-MIC inputs.  You can record in stereo from the mic input, but you will
-get the same signal on both channels (within the limits of A/D
-accuracy).  Full scale on the Line input is +/- 2.0 V.  Full scale on
-the MIC input is 20 dB less, or +/- 0.2 V.
-
-The AD1843's LOUT1 outputs are connected to the Line Out jacks.  The
-AD1843's HPOUT outputs are connected to the speaker/headphone jack.
-LOUT2 is not connected.  Line out's maximum level is +/- 2.0 V peak to
-peak.  The speaker/headphone out's maximum is +/- 4.0 V peak to peak.
-
-The AD1843's PCM input channel and one of its output channels (DAC1)
-are connected to Lithium.  The other output channel (DAC2) is not
-connected.
-
-==============================================================================
-CAPABILITIES
-
-The AD1843 has PCM input and output (Pulse Code Modulation, also known
-as wavetable).  PCM input and output can be mono or stereo in any of
-four formats.  The formats are 16 bit signed and 8 bit unsigned,
-u-Law, and A-Law format.  Any sample rate from 4 KHz to 49 KHz is
-available, in 1 Hz increments.
-
-The AD1843 includes an analog mixer that can mix all three input
-signals (line, mic and CD) into the analog outputs.  The mixer has a
-separate gain control and mute switch for each input.
-
-There are two outputs, line out and speaker/headphone out.  They
-always produce the same signal, and the speaker always has 3 dB more
-gain than the line out.  The speaker/headphone output can be muted,
-but this driver does not export that function.
-
-The hardware can sync audio to the video clock, but this driver does
-not have a way to specify syncing to video.
-
-==============================================================================
-PROGRAMMING
-
-This section explains the API supported by the driver.  Also see the
-Open Sound Programming Guide at http://www.opensound.com/pguide/ .
-This section assumes familiarity with that document.
-
-The driver has two interfaces, an I/O interface and a mixer interface.
-There is no MIDI or sequencer capability.
-
-==============================================================================
-PROGRAMMING PCM I/O
-
-The I/O interface is usually accessed as /dev/audio or /dev/dsp.
-Using the standard Open Sound System (OSS) ioctl calls, the sample
-rate, number of channels, and sample format may be set within the
-limitations described above.  The driver supports triggering.  It also
-supports getting the input and output pointers with one-sample
-accuracy.
-
-The SNDCTL_DSP_GETCAP ioctl returns these capabilities.
-
-	DSP_CAP_DUPLEX - driver supports full duplex.
-
-	DSP_CAP_TRIGGER - driver supports triggering.
-
-	DSP_CAP_REALTIME - values returned by SNDCTL_DSP_GETIPTR
-	and SNDCTL_DSP_GETOPTR are accurate to a few samples.
-
-Memory mapping (mmap) is not implemented.
-
-The driver permits subdivided fragment sizes from 64 to 4096 bytes.
-The number of fragments can be anything from 3 fragments to however
-many fragments fit into 124 kilobytes.  It is up to the user to
-determine how few/small fragments can be used without introducing
-glitches with a given workload.  Linux is not realtime, so we can't
-promise anything.  (sigh...)
-
-When this driver is switched into or out of mu-Law or A-Law mode on
-output, it may produce an audible click.  This is unavoidable.  To
-prevent clicking, use signed 16-bit mode instead, and convert from
-mu-Law or A-Law format in software.
-
-==============================================================================
-PROGRAMMING THE MIXER INTERFACE
-
-The mixer interface is usually accessed as /dev/mixer.  It is accessed
-through ioctls.  The mixer allows the application to control gain or
-mute several audio signal paths, and also allows selection of the
-recording source.
-
-Each of the constants described here can be read using the
-MIXER_READ(SOUND_MIXER_xxx) ioctl.  Those that are not read-only can
-also be written using the MIXER_WRITE(SOUND_MIXER_xxx) ioctl.  In most
-cases, <sys/soundcard.h> defines constants SOUND_MIXER_READ_xxx and
-SOUND_MIXER_WRITE_xxx which work just as well.
-
-SOUND_MIXER_CAPS	Read-only
-
-This is a mask of optional driver capabilities that are implemented.
-This driver's only capability is SOUND_CAP_EXCL_INPUT, which means
-that only one recording source can be active at a time.
-
-SOUND_MIXER_DEVMASK	Read-only
-
-This is a mask of the sound channels.  This driver's channels are PCM,
-LINE, MIC, CD, and RECLEV.
-
-SOUND_MIXER_STEREODEVS	Read-only
-
-This is a mask of which sound channels are capable of stereo.  All
-channels are capable of stereo.  (But see caveat on MIC input in I/O
-CONNECTIONS section above).
-
-SOUND_MIXER_OUTMASK	Read-only
-
-This is a mask of channels that route inputs through to outputs.
-Those are LINE, MIC, and CD.
-
-SOUND_MIXER_RECMASK	Read-only
-
-This is a mask of channels that can be recording sources.  Those are
-PCM, LINE, MIC, CD.
-
-SOUND_MIXER_PCM		Default: 0x5757 (0 dB)
-
-This is the gain control for PCM output.  The left and right channel
-gain are controlled independently.  This gain control has 64 levels,
-which range from -82.5 dB to +12.0 dB in 1.5 dB steps.  Those 64
-levels are mapped onto 100 levels at the ioctl, see below.
-
-SOUND_MIXER_LINE	Default: 0x4a4a (0 dB)
-
-This is the gain control for mixing the Line In source into the
-outputs.  The left and right channel gain are controlled
-independently.  This gain control has 32 levels, which range from
--34.5 dB to +12.0 dB in 1.5 dB steps.  Those 32 levels are mapped onto
-100 levels at the ioctl, see below.
-
-SOUND_MIXER_MIC		Default: 0x4a4a (0 dB)
-
-This is the gain control for mixing the MIC source into the outputs.
-The left and right channel gain are controlled independently.  This
-gain control has 32 levels, which range from -34.5 dB to +12.0 dB in
-1.5 dB steps.  Those 32 levels are mapped onto 100 levels at the
-ioctl, see below.
-
-SOUND_MIXER_CD		Default: 0x4a4a (0 dB)
-
-This is the gain control for mixing the CD audio source into the
-outputs.  The left and right channel gain are controlled
-independently.  This gain control has 32 levels, which range from
--34.5 dB to +12.0 dB in 1.5 dB steps.  Those 32 levels are mapped onto
-100 levels at the ioctl, see below.
-
-SOUND_MIXER_RECLEV	 Default: 0 (0 dB)
-
-This is the gain control for PCM input (RECording LEVel).  The left
-and right channel gain are controlled independently.  This gain
-control has 16 levels, which range from 0 dB to +22.5 dB in 1.5 dB
-steps.  Those 16 levels are mapped onto 100 levels at the ioctl, see
-below.
-
-SOUND_MIXER_RECSRC	 Default: SOUND_MASK_LINE
-
-This is a mask of currently selected PCM input sources (RECording
-SouRCes).  Because the AD1843 can only have a single recording source
-at a time, only one bit at a time can be set in this mask.  The
-allowable values are SOUND_MASK_PCM, SOUND_MASK_LINE, SOUND_MASK_MIC,
-or SOUND_MASK_CD.  Selecting SOUND_MASK_PCM sets up internal
-resampling which is useful for loopback testing and for hardware
-sample rate conversion.  But software sample rate conversion is
-probably faster, so I don't know how useful that is.
-
-SOUND_MIXER_OUTSRC	DEFAULT: SOUND_MASK_LINE|SOUND_MASK_MIC|SOUND_MASK_CD
-
-This is a mask of sources that are currently passed through to the
-outputs.  Those sources whose bits are not set are muted.
-
-==============================================================================
-GAIN CONTROL
-
-There are five gain controls listed above.  Each has 16, 32, or 64
-steps.  Each control has 1.5 dB of gain per step.  Each control is
-stereo.
-
-The OSS defines the argument to a channel gain ioctl as having two
-components, left and right, each of which ranges from 0 to 100.  The
-two components are packed into the same word, with the left side gain
-in the least significant byte, and the right side gain in the second
-least significant byte.  In C, we would say this.
-
-	#include <assert.h>
-
-	...
-
-	 	assert(leftgain >= 0 && leftgain <= 100);
-		assert(rightgain >= 0 && rightgain <= 100);
-		arg = leftgain | rightgain << 8;
-
-So each OSS gain control has 101 steps.  But the hardware has 16, 32,
-or 64 steps.  The hardware steps are spread across the 101 OSS steps
-nearly evenly.  The conversion formulas are like this, given N equals
-16, 32, or 64.
-
-	int round = N/2 - 1;
-	OSS_gain_steps = (hw_gain_steps * 100 + round) / (N - 1);
-	hw_gain_steps = (OSS_gain_steps * (N - 1) + round) / 100;
-
-Here is a snippet of C code that will return the left and right gain
-of any channel in dB.  Pass it one of the predefined gain_desc_t
-structures to access any of the five channels' gains.
-
-	typedef struct gain_desc {
-		float min_gain;
-		float gain_step;
-		int nbits;
-		int chan;
-	} gain_desc_t;
-
-	const gain_desc_t gain_pcm    = { -82.5, 1.5, 6, SOUND_MIXER_PCM    };
-	const gain_desc_t gain_line   = { -34.5, 1.5, 5, SOUND_MIXER_LINE   };
-	const gain_desc_t gain_mic    = { -34.5, 1.5, 5, SOUND_MIXER_MIC    };
-	const gain_desc_t gain_cd     = { -34.5, 1.5, 5, SOUND_MIXER_CD     };
-	const gain_desc_t gain_reclev = {   0.0, 1.5, 4, SOUND_MIXER_RECLEV };
-
-	int get_gain_dB(int fd, const gain_desc_t *gp,
-			float *left, float *right)
-	{
-		int word;
-		int lg, rg;
-		int mask = (1 << gp->nbits) - 1;
-
-		if (ioctl(fd, MIXER_READ(gp->chan), &word) != 0)
-			return -1;	/* fail */
-		lg = word & 0xFF;
-		rg = word >> 8 & 0xFF;
-		lg = (lg * mask + mask / 2) / 100;
-		rg = (rg * mask + mask / 2) / 100;
-		*left = gp->min_gain + gp->gain_step * lg;
-		*right = gp->min_gain + gp->gain_step * rg;
-		return 0;
-	}	
-
-And here is the corresponding routine to set a channel's gain in dB.
-
-	int set_gain_dB(int fd, const gain_desc_t *gp, float left, float right)
-	{
-		float max_gain =
-			gp->min_gain + (1 << gp->nbits) * gp->gain_step;
-		float round = gp->gain_step / 2;
-		int mask = (1 << gp->nbits) - 1;
-		int word;
-		int lg, rg;
-
-		if (left < gp->min_gain || right < gp->min_gain)
-			return EINVAL;
-		lg = (left - gp->min_gain + round) / gp->gain_step;
-		rg = (right - gp->min_gain + round) / gp->gain_step;
-		if (lg >= (1 << gp->nbits) || rg >= (1 << gp->nbits))
-			return EINVAL;
-		lg = (100 * lg + mask / 2) / mask;
-		rg = (100 * rg + mask / 2) / mask;
-		word = lg | rg << 8;
-
-		return ioctl(fd, MIXER_WRITE(gp->chan), &word);
-	}
-
diff --git a/MAINTAINERS b/MAINTAINERS
index b2cf5cf..7f9bc84 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7757,13 +7757,6 @@ F:	Documentation/ia64/serial.txt
 F:	drivers/tty/serial/ioc?_serial.c
 F:	include/linux/ioc?.h
 
-SGI VISUAL WORKSTATION 320 AND 540
-M:	Andrey Panin <pazke@xxxxxxxxx>
-L:	linux-visws-devel@xxxxxxxxxxxx
-W:	http://linux-visws.sf.net
-S:	Maintained for 2.6.
-F:	Documentation/sgi-visws.txt
-
 SGI XP/XPC/XPNET DRIVER
 M:	Cliff Whickman <cpw@xxxxxxx>
 M:	Robin Holt <robinmholt@xxxxxxxxx>
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 4c33fc2..3c7f6db 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -517,19 +517,6 @@ config X86_SUPPORTS_MEMORY_FAILURE
 	depends on X86_64 || !SPARSEMEM
 	select ARCH_SUPPORTS_MEMORY_FAILURE
 
-config X86_VISWS
-	bool "SGI 320/540 (Visual Workstation)"
-	depends on X86_32 && PCI && X86_MPPARSE && PCI_GODIRECT
-	depends on X86_32_NON_STANDARD
-	---help---
-	  The SGI Visual Workstation series is an IA32-based workstation
-	  based on SGI systems chips with some legacy PC hardware attached.
-
-	  Say Y here to create a kernel to run on the SGI 320 or 540.
-
-	  A kernel compiled for the Visual Workstation will run on general
-	  PCs as well. See <file:Documentation/sgi-visws.txt> for details.
-
 config STA2X11
 	bool "STA2X11 Companion Chip Support"
 	depends on X86_32_NON_STANDARD && PCI
@@ -860,10 +847,6 @@ config X86_IO_APIC
 	def_bool y
 	depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_IOAPIC || PCI_MSI
 
-config X86_VISWS_APIC
-	def_bool y
-	depends on X86_32 && X86_VISWS
-
 config X86_REROUTE_FOR_BROKEN_BOOT_IRQS
 	bool "Reroute for broken boot IRQs"
 	depends on X86_IO_APIC
diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h
index 7252cd3..f690ee42 100644
--- a/arch/x86/include/asm/fixmap.h
+++ b/arch/x86/include/asm/fixmap.h
@@ -98,12 +98,6 @@ enum fixed_addresses {
 	FIX_IO_APIC_BASE_0,
 	FIX_IO_APIC_BASE_END = FIX_IO_APIC_BASE_0 + MAX_IO_APICS - 1,
 #endif
-#ifdef CONFIG_X86_VISWS_APIC
-	FIX_CO_CPU,	/* Cobalt timer */
-	FIX_CO_APIC,	/* Cobalt APIC Redirection Table */
-	FIX_LI_PCIA,	/* Lithium PCI Bridge A */
-	FIX_LI_PCIB,	/* Lithium PCI Bridge B */
-#endif
 	FIX_RO_IDT,	/* Virtual mapping for read-only IDT */
 #ifdef CONFIG_X86_32
 	FIX_KMAP_BEGIN,	/* reserved pte's for temporary kernel mappings */
diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h
index 67d69b8..a307b75 100644
--- a/arch/x86/include/asm/hw_irq.h
+++ b/arch/x86/include/asm/hw_irq.h
@@ -98,7 +98,6 @@ extern void trace_call_function_single_interrupt(void);
 #define IO_APIC_IRQ(x) (((x) >= NR_IRQS_LEGACY) || ((1<<(x)) & io_apic_irqs))
 extern unsigned long io_apic_irqs;
 
-extern void init_VISWS_APIC_irqs(void);
 extern void setup_IO_APIC(void);
 extern void disable_IO_APIC(void);
 
diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index d62c9f8..9264f04 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -39,12 +39,6 @@ static inline void vsmp_init(void) { }
 
 void setup_bios_corruption_check(void);
 
-#ifdef CONFIG_X86_VISWS
-extern void visws_early_detect(void);
-#else
-static inline void visws_early_detect(void) { }
-#endif
-
 extern unsigned long saved_video_mode;
 
 extern void reserve_standard_io_resources(void);
diff --git a/arch/x86/include/asm/visws/cobalt.h b/arch/x86/include/asm/visws/cobalt.h
deleted file mode 100644
index 2edb376..0000000
--- a/arch/x86/include/asm/visws/cobalt.h
+++ /dev/null
@@ -1,127 +0,0 @@
-#ifndef _ASM_X86_VISWS_COBALT_H
-#define _ASM_X86_VISWS_COBALT_H
-
-#include <asm/fixmap.h>
-
-/*
- * Cobalt SGI Visual Workstation system ASIC
- */ 
-
-#define CO_CPU_NUM_PHYS 0x1e00
-#define CO_CPU_TAB_PHYS (CO_CPU_NUM_PHYS + 2)
-
-#define CO_CPU_MAX 4
-
-#define	CO_CPU_PHYS		0xc2000000
-#define	CO_APIC_PHYS		0xc4000000
-
-/* see set_fixmap() and asm/fixmap.h */
-#define	CO_CPU_VADDR		(fix_to_virt(FIX_CO_CPU))
-#define	CO_APIC_VADDR		(fix_to_virt(FIX_CO_APIC))
-
-/* Cobalt CPU registers -- relative to CO_CPU_VADDR, use co_cpu_*() */
-#define	CO_CPU_REV		0x08
-#define	CO_CPU_CTRL		0x10
-#define	CO_CPU_STAT		0x20
-#define	CO_CPU_TIMEVAL		0x30
-
-/* CO_CPU_CTRL bits */
-#define	CO_CTRL_TIMERUN		0x04		/* 0 == disabled */
-#define	CO_CTRL_TIMEMASK	0x08		/* 0 == unmasked */
-
-/* CO_CPU_STATUS bits */
-#define	CO_STAT_TIMEINTR	0x02	/* (r) 1 == int pend, (w) 0 == clear */
-
-/* CO_CPU_TIMEVAL value */
-#define	CO_TIME_HZ		100000000	/* Cobalt core rate */
-
-/* Cobalt APIC registers -- relative to CO_APIC_VADDR, use co_apic_*() */
-#define	CO_APIC_HI(n)		(((n) * 0x10) + 4)
-#define	CO_APIC_LO(n)		((n) * 0x10)
-#define	CO_APIC_ID		0x0ffc
-
-/* CO_APIC_ID bits */
-#define	CO_APIC_ENABLE		0x00000100
-
-/* CO_APIC_LO bits */
-#define	CO_APIC_MASK		0x00010000	/* 0 = enabled */
-#define	CO_APIC_LEVEL		0x00008000	/* 0 = edge */
-
-/*
- * Where things are physically wired to Cobalt
- * #defines with no board _<type>_<rev>_ are common to all (thus far)
- */
-#define	CO_APIC_IDE0		4
-#define CO_APIC_IDE1		2		/* Only on 320 */
-
-#define	CO_APIC_8259		12		/* serial, floppy, par-l-l */
-
-/* Lithium PCI Bridge A -- "the one with 82557 Ethernet" */
-#define	CO_APIC_PCIA_BASE0	0 /* and 1 */	/* slot 0, line 0 */
-#define	CO_APIC_PCIA_BASE123	5 /* and 6 */	/* slot 0, line 1 */
-
-#define	CO_APIC_PIIX4_USB	7		/* this one is weird */
-
-/* Lithium PCI Bridge B -- "the one with PIIX4" */
-#define	CO_APIC_PCIB_BASE0	8 /* and 9-12 *//* slot 0, line 0 */
-#define	CO_APIC_PCIB_BASE123	13 /* 14.15 */	/* slot 0, line 1 */
-
-#define	CO_APIC_VIDOUT0		16
-#define	CO_APIC_VIDOUT1		17
-#define	CO_APIC_VIDIN0		18
-#define	CO_APIC_VIDIN1		19
-
-#define	CO_APIC_LI_AUDIO	22
-
-#define	CO_APIC_AS		24
-#define	CO_APIC_RE		25
-
-#define CO_APIC_CPU		28		/* Timer and Cache interrupt */
-#define	CO_APIC_NMI		29
-#define	CO_APIC_LAST		CO_APIC_NMI
-
-/*
- * This is how irqs are assigned on the Visual Workstation.
- * Legacy devices get irq's 1-15 (system clock is 0 and is CO_APIC_CPU).
- * All other devices (including PCI) go to Cobalt and are irq's 16 on up.
- */
-#define	CO_IRQ_APIC0	16			/* irq of apic entry 0 */
-#define	IS_CO_APIC(irq)	((irq) >= CO_IRQ_APIC0)
-#define	CO_IRQ(apic)	(CO_IRQ_APIC0 + (apic))	/* apic ent to irq */
-#define	CO_APIC(irq)	((irq) - CO_IRQ_APIC0)	/* irq to apic ent */
-#define CO_IRQ_IDE0	14			/* knowledge of... */
-#define CO_IRQ_IDE1	15			/* ... ide driver defaults! */
-#define	CO_IRQ_8259	CO_IRQ(CO_APIC_8259)
-
-#ifdef CONFIG_X86_VISWS_APIC
-static inline void co_cpu_write(unsigned long reg, unsigned long v)
-{
-	*((volatile unsigned long *)(CO_CPU_VADDR+reg))=v;
-}
-
-static inline unsigned long co_cpu_read(unsigned long reg)
-{
-	return *((volatile unsigned long *)(CO_CPU_VADDR+reg));
-}            
-             
-static inline void co_apic_write(unsigned long reg, unsigned long v)
-{
-	*((volatile unsigned long *)(CO_APIC_VADDR+reg))=v;
-}            
-             
-static inline unsigned long co_apic_read(unsigned long reg)
-{
-	return *((volatile unsigned long *)(CO_APIC_VADDR+reg));
-}
-#endif
-
-extern char visws_board_type;
-
-#define	VISWS_320	0
-#define	VISWS_540	1
-
-extern char visws_board_rev;
-
-extern int pci_visws_init(void);
-
-#endif /* _ASM_X86_VISWS_COBALT_H */
diff --git a/arch/x86/include/asm/visws/lithium.h b/arch/x86/include/asm/visws/lithium.h
deleted file mode 100644
index a10d89b..0000000
--- a/arch/x86/include/asm/visws/lithium.h
+++ /dev/null
@@ -1,53 +0,0 @@
-#ifndef _ASM_X86_VISWS_LITHIUM_H
-#define _ASM_X86_VISWS_LITHIUM_H
-
-#include <asm/fixmap.h>
-
-/*
- * Lithium is the SGI Visual Workstation I/O ASIC
- */
-
-#define	LI_PCI_A_PHYS		0xfc000000	/* Enet is dev 3 */
-#define	LI_PCI_B_PHYS		0xfd000000	/* PIIX4 is here */
-
-/* see set_fixmap() and asm/fixmap.h */
-#define LI_PCIA_VADDR   (fix_to_virt(FIX_LI_PCIA))
-#define LI_PCIB_VADDR   (fix_to_virt(FIX_LI_PCIB))
-
-/* Not a standard PCI? (not in linux/pci.h) */
-#define	LI_PCI_BUSNUM	0x44			/* lo8: primary, hi8: sub */
-#define LI_PCI_INTEN    0x46
-
-/* LI_PCI_INTENT bits */
-#define	LI_INTA_0	0x0001
-#define	LI_INTA_1	0x0002
-#define	LI_INTA_2	0x0004
-#define	LI_INTA_3	0x0008
-#define	LI_INTA_4	0x0010
-#define	LI_INTB		0x0020
-#define	LI_INTC		0x0040
-#define	LI_INTD		0x0080
-
-/* More special purpose macros... */
-static inline void li_pcia_write16(unsigned long reg, unsigned short v)
-{
-	*((volatile unsigned short *)(LI_PCIA_VADDR+reg))=v;
-}
-
-static inline unsigned short li_pcia_read16(unsigned long reg)
-{
-	 return *((volatile unsigned short *)(LI_PCIA_VADDR+reg));
-}
-
-static inline void li_pcib_write16(unsigned long reg, unsigned short v)
-{
-	*((volatile unsigned short *)(LI_PCIB_VADDR+reg))=v;
-}
-
-static inline unsigned short li_pcib_read16(unsigned long reg)
-{
-	return *((volatile unsigned short *)(LI_PCIB_VADDR+reg));
-}
-
-#endif /* _ASM_X86_VISWS_LITHIUM_H */
-
diff --git a/arch/x86/include/asm/visws/piix4.h b/arch/x86/include/asm/visws/piix4.h
deleted file mode 100644
index d0af4d3..0000000
--- a/arch/x86/include/asm/visws/piix4.h
+++ /dev/null
@@ -1,107 +0,0 @@
-#ifndef _ASM_X86_VISWS_PIIX4_H
-#define _ASM_X86_VISWS_PIIX4_H
-
-/*
- * PIIX4 as used on SGI Visual Workstations
- */
-
-#define	PIIX_PM_START		0x0F80
-
-#define	SIO_GPIO_START		0x0FC0
-
-#define	SIO_PM_START		0x0FC8
-
-#define	PMBASE			PIIX_PM_START
-#define	GPIREG0			(PMBASE+0x30)
-#define	GPIREG(x)		(GPIREG0+((x)/8))
-#define	GPIBIT(x)		(1 << ((x)%8))
-
-#define	PIIX_GPI_BD_ID1		18
-#define	PIIX_GPI_BD_ID2		19
-#define	PIIX_GPI_BD_ID3		20
-#define	PIIX_GPI_BD_ID4		21
-#define	PIIX_GPI_BD_REG		GPIREG(PIIX_GPI_BD_ID1)
-#define	PIIX_GPI_BD_MASK	(GPIBIT(PIIX_GPI_BD_ID1) | \
-				GPIBIT(PIIX_GPI_BD_ID2) | \
-				GPIBIT(PIIX_GPI_BD_ID3) | \
-				GPIBIT(PIIX_GPI_BD_ID4) )
-
-#define	PIIX_GPI_BD_SHIFT	(PIIX_GPI_BD_ID1 % 8)
-
-#define	SIO_INDEX		0x2e
-#define	SIO_DATA		0x2f
-
-#define	SIO_DEV_SEL		0x7
-#define	SIO_DEV_ENB		0x30
-#define	SIO_DEV_MSB		0x60
-#define	SIO_DEV_LSB		0x61
-
-#define	SIO_GP_DEV		0x7
-
-#define	SIO_GP_BASE		SIO_GPIO_START
-#define	SIO_GP_MSB		(SIO_GP_BASE>>8)
-#define	SIO_GP_LSB		(SIO_GP_BASE&0xff)
-
-#define	SIO_GP_DATA1		(SIO_GP_BASE+0)
-
-#define	SIO_PM_DEV		0x8
-
-#define	SIO_PM_BASE		SIO_PM_START
-#define	SIO_PM_MSB		(SIO_PM_BASE>>8)
-#define	SIO_PM_LSB		(SIO_PM_BASE&0xff)
-#define	SIO_PM_INDEX		(SIO_PM_BASE+0)
-#define	SIO_PM_DATA		(SIO_PM_BASE+1)
-
-#define	SIO_PM_FER2		0x1
-
-#define	SIO_PM_GP_EN		0x80
-
-
-
-/*
- * This is the dev/reg where generating a config cycle will
- * result in a PCI special cycle.
- */
-#define SPECIAL_DEV		0xff
-#define SPECIAL_REG		0x00
-
-/*
- * PIIX4 needs to see a special cycle with the following data
- * to be convinced the processor has gone into the stop grant
- * state.  PIIX4 insists on seeing this before it will power
- * down a system.
- */
-#define PIIX_SPECIAL_STOP		0x00120002
-
-#define PIIX4_RESET_PORT	0xcf9
-#define PIIX4_RESET_VAL		0x6
-
-#define PMSTS_PORT		0xf80	// 2 bytes	PM Status
-#define PMEN_PORT		0xf82	// 2 bytes	PM Enable
-#define	PMCNTRL_PORT		0xf84	// 2 bytes	PM Control
-
-#define PM_SUSPEND_ENABLE	0x2000	// start sequence to suspend state
-
-/*
- * PMSTS and PMEN I/O bit definitions.
- * (Bits are the same in both registers)
- */
-#define PM_STS_RSM		(1<<15)	// Resume Status
-#define PM_STS_PWRBTNOR		(1<<11)	// Power Button Override
-#define PM_STS_RTC		(1<<10)	// RTC status
-#define PM_STS_PWRBTN		(1<<8)	// Power Button Pressed?
-#define PM_STS_GBL		(1<<5)	// Global Status
-#define PM_STS_BM		(1<<4)	// Bus Master Status
-#define PM_STS_TMROF		(1<<0)	// Timer Overflow Status.
-
-/*
- * Stop clock GPI register
- */
-#define PIIX_GPIREG0			(0xf80 + 0x30)
-
-/*
- * Stop clock GPI bit in GPIREG0
- */
-#define	PIIX_GPI_STPCLK		0x4	// STPCLK signal routed back in
-
-#endif /* _ASM_X86_VISWS_PIIX4_H */
diff --git a/arch/x86/include/asm/visws/sgivw.h b/arch/x86/include/asm/visws/sgivw.h
deleted file mode 100644
index 5fbf63e..0000000
--- a/arch/x86/include/asm/visws/sgivw.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * Frame buffer position and size:
- */
-extern unsigned long sgivwfb_mem_phys;
-extern unsigned long sgivwfb_mem_size;
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index f824d69..9edae8a 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -2132,7 +2132,6 @@ int generic_processor_info(int apicid, int version)
 	 *
 	 * - arch/x86/kernel/mpparse.c: MP_processor_info()
 	 * - arch/x86/mm/amdtopology.c: amd_numa_init()
-	 * - arch/x86/platform/visws/visws_quirks.c: MP_processor_info()
 	 *
 	 * This function is executed with the modified
 	 * boot_cpu_physical_apicid. So, disabled_cpu_apicid kernel
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 06853e6..12907ab 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -869,7 +869,6 @@ void __init setup_arch(char **cmdline_p)
 
 #ifdef CONFIG_X86_32
 	memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data));
-	visws_early_detect();
 
 	/*
 	 * copy kernel address range established so far and switch
diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile
index e063eed..758b827 100644
--- a/arch/x86/pci/Makefile
+++ b/arch/x86/pci/Makefile
@@ -13,8 +13,6 @@ obj-y				+= legacy.o irq.o
 
 obj-$(CONFIG_STA2X11)           += sta2x11-fixup.o
 
-obj-$(CONFIG_X86_VISWS)		+= visws.o
-
 obj-$(CONFIG_X86_NUMAQ)		+= numaq_32.o
 obj-$(CONFIG_X86_NUMACHIP)	+= numachip.o
 
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 981c2db..ed11916 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -561,7 +561,6 @@ char * __init pcibios_setup(char *str)
 		pci_probe |= PCI_PROBE_NOEARLY;
 		return NULL;
 	}
-#ifndef CONFIG_X86_VISWS
 	else if (!strcmp(str, "usepirqmask")) {
 		pci_probe |= PCI_USE_PIRQ_MASK;
 		return NULL;
@@ -571,9 +570,7 @@ char * __init pcibios_setup(char *str)
 	} else if (!strncmp(str, "lastbus=", 8)) {
 		pcibios_last_bus = simple_strtol(str+8, NULL, 0);
 		return NULL;
-	}
-#endif
-	else if (!strcmp(str, "rom")) {
+	} else if (!strcmp(str, "rom")) {
 		pci_probe |= PCI_ASSIGN_ROMS;
 		return NULL;
 	} else if (!strcmp(str, "norom")) {
diff --git a/arch/x86/pci/visws.c b/arch/x86/pci/visws.c
deleted file mode 100644
index 3e6d2a6..0000000
--- a/arch/x86/pci/visws.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- *	Low-Level PCI Support for SGI Visual Workstation
- *
- *	(c) 1999--2000 Martin Mares <mj@xxxxxx>
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-
-#include <asm/setup.h>
-#include <asm/pci_x86.h>
-#include <asm/visws/cobalt.h>
-#include <asm/visws/lithium.h>
-
-static int pci_visws_enable_irq(struct pci_dev *dev) { return 0; }
-static void pci_visws_disable_irq(struct pci_dev *dev) { }
-
-/* int (*pcibios_enable_irq)(struct pci_dev *dev) = &pci_visws_enable_irq; */
-/* void (*pcibios_disable_irq)(struct pci_dev *dev) = &pci_visws_disable_irq; */
-
-/* void __init pcibios_penalize_isa_irq(int irq, int active) {} */
-
-
-unsigned int pci_bus0, pci_bus1;
-
-static int __init visws_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq, bus = dev->bus->number;
-
-	pin--;
-
-	/* Nothing useful at PIIX4 pin 1 */
-	if (bus == pci_bus0 && slot == 4 && pin == 0)
-		return -1;
-
-	/* PIIX4 USB is on Bus 0, Slot 4, Line 3 */
-	if (bus == pci_bus0 && slot == 4 && pin == 3) {
-		irq = CO_IRQ(CO_APIC_PIIX4_USB);
-		goto out;
-	}
-
-	/* First pin spread down 1 APIC entry per slot */
-	if (pin == 0) {
-		irq = CO_IRQ((bus == pci_bus0 ? CO_APIC_PCIB_BASE0 :
-						CO_APIC_PCIA_BASE0) + slot);
-		goto out;
-	}
-
-	/* lines 1,2,3 from any slot is shared in this twirly pattern */
-	if (bus == pci_bus1) {
-		/* lines 1-3 from devices 0 1 rotate over 2 apic entries */
-		irq = CO_IRQ(CO_APIC_PCIA_BASE123 + ((slot + (pin - 1)) % 2));
-	} else { /* bus == pci_bus0 */
-		/* lines 1-3 from devices 0-3 rotate over 3 apic entries */
-		if (slot == 0)
-			slot = 3; /* same pattern */
-		irq = CO_IRQ(CO_APIC_PCIA_BASE123 + ((3 - slot) + (pin - 1) % 3));
-	}
-out:
-	printk(KERN_DEBUG "PCI: Bus %d Slot %d Line %d -> IRQ %d\n", bus, slot, pin, irq);
-	return irq;
-}
-
-int __init pci_visws_init(void)
-{
-	pcibios_enable_irq = &pci_visws_enable_irq;
-	pcibios_disable_irq = &pci_visws_disable_irq;
-
-	/* The VISWS supports configuration access type 1 only */
-	pci_probe = (pci_probe | PCI_PROBE_CONF1) &
-		    ~(PCI_PROBE_BIOS | PCI_PROBE_CONF2);
-
-	pci_bus0 = li_pcib_read16(LI_PCI_BUSNUM) & 0xff;
-	pci_bus1 = li_pcia_read16(LI_PCI_BUSNUM) & 0xff;
-
-	printk(KERN_INFO "PCI: Lithium bridge A bus: %u, "
-		"bridge B (PIIX4) bus: %u\n", pci_bus1, pci_bus0);
-
-	raw_pci_ops = &pci_direct_conf1;
-	pci_scan_bus_with_sysdata(pci_bus0);
-	pci_scan_bus_with_sysdata(pci_bus1);
-	pci_fixup_irqs(pci_common_swizzle, visws_map_irq);
-	pcibios_resource_survey();
-	/* Request bus scan */
-	return 1;
-}
diff --git a/arch/x86/platform/Makefile b/arch/x86/platform/Makefile
index 20342d4..85afde1 100644
--- a/arch/x86/platform/Makefile
+++ b/arch/x86/platform/Makefile
@@ -9,5 +9,4 @@ obj-y	+= olpc/
 obj-y	+= scx200/
 obj-y	+= sfi/
 obj-y	+= ts5500/
-obj-y	+= visws/
 obj-y	+= uv/
diff --git a/arch/x86/platform/visws/Makefile b/arch/x86/platform/visws/Makefile
deleted file mode 100644
index 91bc17a..0000000
--- a/arch/x86/platform/visws/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-$(CONFIG_X86_VISWS)	+= visws_quirks.o
diff --git a/arch/x86/platform/visws/visws_quirks.c b/arch/x86/platform/visws/visws_quirks.c
deleted file mode 100644
index 94d8a39..0000000
--- a/arch/x86/platform/visws/visws_quirks.c
+++ /dev/null
@@ -1,608 +0,0 @@
-/*
- *  SGI Visual Workstation support and quirks, unmaintained.
- *
- *  Split out from setup.c by davej@xxxxxxx
- *
- *	Copyright (C) 1999 Bent Hagemark, Ingo Molnar
- *
- *  SGI Visual Workstation interrupt controller
- *
- *  The Cobalt system ASIC in the Visual Workstation contains a "Cobalt" APIC
- *  which serves as the main interrupt controller in the system.  Non-legacy
- *  hardware in the system uses this controller directly.  Legacy devices
- *  are connected to the PIIX4 which in turn has its 8259(s) connected to
- *  a of the Cobalt APIC entry.
- *
- *  09/02/2000 - Updated for 2.4 by jbarnes@xxxxxxx
- *
- *  25/11/2002 - Updated for 2.5 by Andrey Panin <pazke@xxxxxxxxxx>
- */
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-
-#include <asm/visws/cobalt.h>
-#include <asm/visws/piix4.h>
-#include <asm/io_apic.h>
-#include <asm/fixmap.h>
-#include <asm/reboot.h>
-#include <asm/setup.h>
-#include <asm/apic.h>
-#include <asm/e820.h>
-#include <asm/time.h>
-#include <asm/io.h>
-
-#include <linux/kernel_stat.h>
-
-#include <asm/i8259.h>
-#include <asm/irq_vectors.h>
-#include <asm/visws/lithium.h>
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/pci_ids.h>
-
-extern int no_broadcast;
-
-char visws_board_type	= -1;
-char visws_board_rev	= -1;
-
-static void __init visws_time_init(void)
-{
-	printk(KERN_INFO "Starting Cobalt Timer system clock\n");
-
-	/* Set the countdown value */
-	co_cpu_write(CO_CPU_TIMEVAL, CO_TIME_HZ/HZ);
-
-	/* Start the timer */
-	co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) | CO_CTRL_TIMERUN);
-
-	/* Enable (unmask) the timer interrupt */
-	co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) & ~CO_CTRL_TIMEMASK);
-
-	setup_default_timer_irq();
-}
-
-/* Replaces the default init_ISA_irqs in the generic setup */
-static void __init visws_pre_intr_init(void);
-
-/* Quirk for machine specific memory setup. */
-
-#define MB (1024 * 1024)
-
-unsigned long sgivwfb_mem_phys;
-unsigned long sgivwfb_mem_size;
-EXPORT_SYMBOL(sgivwfb_mem_phys);
-EXPORT_SYMBOL(sgivwfb_mem_size);
-
-long long mem_size __initdata = 0;
-
-static char * __init visws_memory_setup(void)
-{
-	long long gfx_mem_size = 8 * MB;
-
-	mem_size = boot_params.alt_mem_k;
-
-	if (!mem_size) {
-		printk(KERN_WARNING "Bootloader didn't set memory size, upgrade it !\n");
-		mem_size = 128 * MB;
-	}
-
-	/*
-	 * this hardcodes the graphics memory to 8 MB
-	 * it really should be sized dynamically (or at least
-	 * set as a boot param)
-	 */
-	if (!sgivwfb_mem_size) {
-		printk(KERN_WARNING "Defaulting to 8 MB framebuffer size\n");
-		sgivwfb_mem_size = 8 * MB;
-	}
-
-	/*
-	 * Trim to nearest MB
-	 */
-	sgivwfb_mem_size &= ~((1 << 20) - 1);
-	sgivwfb_mem_phys = mem_size - gfx_mem_size;
-
-	e820_add_region(0, LOWMEMSIZE(), E820_RAM);
-	e820_add_region(HIGH_MEMORY, mem_size - sgivwfb_mem_size - HIGH_MEMORY, E820_RAM);
-	e820_add_region(sgivwfb_mem_phys, sgivwfb_mem_size, E820_RESERVED);
-
-	return "PROM";
-}
-
-static void visws_machine_emergency_restart(void)
-{
-	/*
-	 * Visual Workstations restart after this
-	 * register is poked on the PIIX4
-	 */
-	outb(PIIX4_RESET_VAL, PIIX4_RESET_PORT);
-}
-
-static void visws_machine_power_off(void)
-{
-	unsigned short pm_status;
-/*	extern unsigned int pci_bus0; */
-
-	while ((pm_status = inw(PMSTS_PORT)) & 0x100)
-		outw(pm_status, PMSTS_PORT);
-
-	outw(PM_SUSPEND_ENABLE, PMCNTRL_PORT);
-
-	mdelay(10);
-
-#define PCI_CONF1_ADDRESS(bus, devfn, reg) \
-	(0x80000000 | (bus << 16) | (devfn << 8) | (reg & ~3))
-
-/*	outl(PCI_CONF1_ADDRESS(pci_bus0, SPECIAL_DEV, SPECIAL_REG), 0xCF8); */
-	outl(PIIX_SPECIAL_STOP, 0xCFC);
-}
-
-static void __init visws_get_smp_config(unsigned int early)
-{
-}
-
-/*
- * The Visual Workstation is Intel MP compliant in the hardware
- * sense, but it doesn't have a BIOS(-configuration table).
- * No problem for Linux.
- */
-
-static void __init MP_processor_info(struct mpc_cpu *m)
-{
-	int ver, logical_apicid;
-	physid_mask_t apic_cpus;
-
-	if (!(m->cpuflag & CPU_ENABLED))
-		return;
-
-	logical_apicid = m->apicid;
-	printk(KERN_INFO "%sCPU #%d %u:%u APIC version %d\n",
-	       m->cpuflag & CPU_BOOTPROCESSOR ? "Bootup " : "",
-	       m->apicid, (m->cpufeature & CPU_FAMILY_MASK) >> 8,
-	       (m->cpufeature & CPU_MODEL_MASK) >> 4, m->apicver);
-
-	if (m->cpuflag & CPU_BOOTPROCESSOR)
-		boot_cpu_physical_apicid = m->apicid;
-
-	ver = m->apicver;
-	if ((ver >= 0x14 && m->apicid >= 0xff) || m->apicid >= 0xf) {
-		printk(KERN_ERR "Processor #%d INVALID. (Max ID: %d).\n",
-			m->apicid, MAX_LOCAL_APIC);
-		return;
-	}
-
-	apic->apicid_to_cpu_present(m->apicid, &apic_cpus);
-	physids_or(phys_cpu_present_map, phys_cpu_present_map, apic_cpus);
-	/*
-	 * Validate version
-	 */
-	if (ver == 0x0) {
-		printk(KERN_ERR "BIOS bug, APIC version is 0 for CPU#%d! "
-			"fixing up to 0x10. (tell your hw vendor)\n",
-			m->apicid);
-		ver = 0x10;
-	}
-	apic_version[m->apicid] = ver;
-}
-
-static void __init visws_find_smp_config(void)
-{
-	struct mpc_cpu *mp = phys_to_virt(CO_CPU_TAB_PHYS);
-	unsigned short ncpus = readw(phys_to_virt(CO_CPU_NUM_PHYS));
-
-	if (ncpus > CO_CPU_MAX) {
-		printk(KERN_WARNING "find_visws_smp: got cpu count of %d at %p\n",
-			ncpus, mp);
-
-		ncpus = CO_CPU_MAX;
-	}
-
-	if (ncpus > setup_max_cpus)
-		ncpus = setup_max_cpus;
-
-#ifdef CONFIG_X86_LOCAL_APIC
-	smp_found_config = 1;
-#endif
-	while (ncpus--)
-		MP_processor_info(mp++);
-
-	mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
-}
-
-static void visws_trap_init(void);
-
-void __init visws_early_detect(void)
-{
-	int raw;
-
-	visws_board_type = (char)(inb_p(PIIX_GPI_BD_REG) & PIIX_GPI_BD_REG)
-							 >> PIIX_GPI_BD_SHIFT;
-
-	if (visws_board_type < 0)
-		return;
-
-	/*
-	 * Override the default platform setup functions
-	 */
-	x86_init.resources.memory_setup = visws_memory_setup;
-	x86_init.mpparse.get_smp_config = visws_get_smp_config;
-	x86_init.mpparse.find_smp_config = visws_find_smp_config;
-	x86_init.irqs.pre_vector_init = visws_pre_intr_init;
-	x86_init.irqs.trap_init = visws_trap_init;
-	x86_init.timers.timer_init = visws_time_init;
-	x86_init.pci.init = pci_visws_init;
-	x86_init.pci.init_irq = x86_init_noop;
-
-	/*
-	 * Install reboot quirks:
-	 */
-	pm_power_off			= visws_machine_power_off;
-	machine_ops.emergency_restart	= visws_machine_emergency_restart;
-
-	/*
-	 * Do not use broadcast IPIs:
-	 */
-	no_broadcast = 0;
-
-#ifdef CONFIG_X86_IO_APIC
-	/*
-	 * Turn off IO-APIC detection and initialization:
-	 */
-	skip_ioapic_setup		= 1;
-#endif
-
-	/*
-	 * Get Board rev.
-	 * First, we have to initialize the 307 part to allow us access
-	 * to the GPIO registers.  Let's map them at 0x0fc0 which is right
-	 * after the PIIX4 PM section.
-	 */
-	outb_p(SIO_DEV_SEL, SIO_INDEX);
-	outb_p(SIO_GP_DEV, SIO_DATA);	/* Talk to GPIO regs. */
-
-	outb_p(SIO_DEV_MSB, SIO_INDEX);
-	outb_p(SIO_GP_MSB, SIO_DATA);	/* MSB of GPIO base address */
-
-	outb_p(SIO_DEV_LSB, SIO_INDEX);
-	outb_p(SIO_GP_LSB, SIO_DATA);	/* LSB of GPIO base address */
-
-	outb_p(SIO_DEV_ENB, SIO_INDEX);
-	outb_p(1, SIO_DATA);		/* Enable GPIO registers. */
-
-	/*
-	 * Now, we have to map the power management section to write
-	 * a bit which enables access to the GPIO registers.
-	 * What lunatic came up with this shit?
-	 */
-	outb_p(SIO_DEV_SEL, SIO_INDEX);
-	outb_p(SIO_PM_DEV, SIO_DATA);	/* Talk to GPIO regs. */
-
-	outb_p(SIO_DEV_MSB, SIO_INDEX);
-	outb_p(SIO_PM_MSB, SIO_DATA);	/* MSB of PM base address */
-
-	outb_p(SIO_DEV_LSB, SIO_INDEX);
-	outb_p(SIO_PM_LSB, SIO_DATA);	/* LSB of PM base address */
-
-	outb_p(SIO_DEV_ENB, SIO_INDEX);
-	outb_p(1, SIO_DATA);		/* Enable PM registers. */
-
-	/*
-	 * Now, write the PM register which enables the GPIO registers.
-	 */
-	outb_p(SIO_PM_FER2, SIO_PM_INDEX);
-	outb_p(SIO_PM_GP_EN, SIO_PM_DATA);
-
-	/*
-	 * Now, initialize the GPIO registers.
-	 * We want them all to be inputs which is the
-	 * power on default, so let's leave them alone.
-	 * So, let's just read the board rev!
-	 */
-	raw = inb_p(SIO_GP_DATA1);
-	raw &= 0x7f;	/* 7 bits of valid board revision ID. */
-
-	if (visws_board_type == VISWS_320) {
-		if (raw < 0x6) {
-			visws_board_rev = 4;
-		} else if (raw < 0xc) {
-			visws_board_rev = 5;
-		} else {
-			visws_board_rev = 6;
-		}
-	} else if (visws_board_type == VISWS_540) {
-			visws_board_rev = 2;
-		} else {
-			visws_board_rev = raw;
-		}
-
-	printk(KERN_INFO "Silicon Graphics Visual Workstation %s (rev %d) detected\n",
-	       (visws_board_type == VISWS_320 ? "320" :
-	       (visws_board_type == VISWS_540 ? "540" :
-		"unknown")), visws_board_rev);
-}
-
-#define A01234 (LI_INTA_0 | LI_INTA_1 | LI_INTA_2 | LI_INTA_3 | LI_INTA_4)
-#define BCD (LI_INTB | LI_INTC | LI_INTD)
-#define ALLDEVS (A01234 | BCD)
-
-static __init void lithium_init(void)
-{
-	set_fixmap(FIX_LI_PCIA, LI_PCI_A_PHYS);
-	set_fixmap(FIX_LI_PCIB, LI_PCI_B_PHYS);
-
-	if ((li_pcia_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) ||
-	    (li_pcia_read16(PCI_DEVICE_ID) != PCI_DEVICE_ID_SGI_LITHIUM)) {
-		printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'A');
-/*		panic("This machine is not SGI Visual Workstation 320/540"); */
-	}
-
-	if ((li_pcib_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) ||
-	    (li_pcib_read16(PCI_DEVICE_ID) != PCI_DEVICE_ID_SGI_LITHIUM)) {
-		printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'B');
-/*		panic("This machine is not SGI Visual Workstation 320/540"); */
-	}
-
-	li_pcia_write16(LI_PCI_INTEN, ALLDEVS);
-	li_pcib_write16(LI_PCI_INTEN, ALLDEVS);
-}
-
-static __init void cobalt_init(void)
-{
-	/*
-	 * On normal SMP PC this is used only with SMP, but we have to
-	 * use it and set it up here to start the Cobalt clock
-	 */
-	set_fixmap(FIX_APIC_BASE, APIC_DEFAULT_PHYS_BASE);
-	setup_local_APIC();
-	printk(KERN_INFO "Local APIC Version %#x, ID %#x\n",
-		(unsigned int)apic_read(APIC_LVR),
-		(unsigned int)apic_read(APIC_ID));
-
-	set_fixmap(FIX_CO_CPU, CO_CPU_PHYS);
-	set_fixmap(FIX_CO_APIC, CO_APIC_PHYS);
-	printk(KERN_INFO "Cobalt Revision %#lx, APIC ID %#lx\n",
-		co_cpu_read(CO_CPU_REV), co_apic_read(CO_APIC_ID));
-
-	/* Enable Cobalt APIC being careful to NOT change the ID! */
-	co_apic_write(CO_APIC_ID, co_apic_read(CO_APIC_ID) | CO_APIC_ENABLE);
-
-	printk(KERN_INFO "Cobalt APIC enabled: ID reg %#lx\n",
-		co_apic_read(CO_APIC_ID));
-}
-
-static void __init visws_trap_init(void)
-{
-	lithium_init();
-	cobalt_init();
-}
-
-/*
- * IRQ controller / APIC support:
- */
-
-static DEFINE_SPINLOCK(cobalt_lock);
-
-/*
- * Set the given Cobalt APIC Redirection Table entry to point
- * to the given IDT vector/index.
- */
-static inline void co_apic_set(int entry, int irq)
-{
-	co_apic_write(CO_APIC_LO(entry), CO_APIC_LEVEL | (irq + FIRST_EXTERNAL_VECTOR));
-	co_apic_write(CO_APIC_HI(entry), 0);
-}
-
-/*
- * Cobalt (IO)-APIC functions to handle PCI devices.
- */
-static inline int co_apic_ide0_hack(void)
-{
-	extern char visws_board_type;
-	extern char visws_board_rev;
-
-	if (visws_board_type == VISWS_320 && visws_board_rev == 5)
-		return 5;
-	return CO_APIC_IDE0;
-}
-
-static int is_co_apic(unsigned int irq)
-{
-	if (IS_CO_APIC(irq))
-		return CO_APIC(irq);
-
-	switch (irq) {
-		case 0: return CO_APIC_CPU;
-		case CO_IRQ_IDE0: return co_apic_ide0_hack();
-		case CO_IRQ_IDE1: return CO_APIC_IDE1;
-		default: return -1;
-	}
-}
-
-
-/*
- * This is the SGI Cobalt (IO-)APIC:
- */
-static void enable_cobalt_irq(struct irq_data *data)
-{
-	co_apic_set(is_co_apic(data->irq), data->irq);
-}
-
-static void disable_cobalt_irq(struct irq_data *data)
-{
-	int entry = is_co_apic(data->irq);
-
-	co_apic_write(CO_APIC_LO(entry), CO_APIC_MASK);
-	co_apic_read(CO_APIC_LO(entry));
-}
-
-static void ack_cobalt_irq(struct irq_data *data)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&cobalt_lock, flags);
-	disable_cobalt_irq(data);
-	apic_write(APIC_EOI, APIC_EOI_ACK);
-	spin_unlock_irqrestore(&cobalt_lock, flags);
-}
-
-static struct irq_chip cobalt_irq_type = {
-	.name		= "Cobalt-APIC",
-	.irq_enable	= enable_cobalt_irq,
-	.irq_disable	= disable_cobalt_irq,
-	.irq_ack	= ack_cobalt_irq,
-};
-
-
-/*
- * This is the PIIX4-based 8259 that is wired up indirectly to Cobalt
- * -- not the manner expected by the code in i8259.c.
- *
- * there is a 'master' physical interrupt source that gets sent to
- * the CPU. But in the chipset there are various 'virtual' interrupts
- * waiting to be handled. We represent this to Linux through a 'master'
- * interrupt controller type, and through a special virtual interrupt-
- * controller. Device drivers only see the virtual interrupt sources.
- */
-static unsigned int startup_piix4_master_irq(struct irq_data *data)
-{
-	legacy_pic->init(0);
-	enable_cobalt_irq(data);
-	return 0;
-}
-
-static struct irq_chip piix4_master_irq_type = {
-	.name		= "PIIX4-master",
-	.irq_startup	= startup_piix4_master_irq,
-	.irq_ack	= ack_cobalt_irq,
-};
-
-static void pii4_mask(struct irq_data *data) { }
-
-static struct irq_chip piix4_virtual_irq_type = {
-	.name		= "PIIX4-virtual",
-	.irq_mask	= pii4_mask,
-};
-
-/*
- * PIIX4-8259 master/virtual functions to handle interrupt requests
- * from legacy devices: floppy, parallel, serial, rtc.
- *
- * None of these get Cobalt APIC entries, neither do they have IDT
- * entries. These interrupts are purely virtual and distributed from
- * the 'master' interrupt source: CO_IRQ_8259.
- *
- * When the 8259 interrupts its handler figures out which of these
- * devices is interrupting and dispatches to its handler.
- *
- * CAREFUL: devices see the 'virtual' interrupt only. Thus disable/
- * enable_irq gets the right irq. This 'master' irq is never directly
- * manipulated by any driver.
- */
-static irqreturn_t piix4_master_intr(int irq, void *dev_id)
-{
-	unsigned long flags;
-	int realirq;
-
-	raw_spin_lock_irqsave(&i8259A_lock, flags);
-
-	/* Find out what's interrupting in the PIIX4 master 8259 */
-	outb(0x0c, 0x20);		/* OCW3 Poll command */
-	realirq = inb(0x20);
-
-	/*
-	 * Bit 7 == 0 means invalid/spurious
-	 */
-	if (unlikely(!(realirq & 0x80)))
-		goto out_unlock;
-
-	realirq &= 7;
-
-	if (unlikely(realirq == 2)) {
-		outb(0x0c, 0xa0);
-		realirq = inb(0xa0);
-
-		if (unlikely(!(realirq & 0x80)))
-			goto out_unlock;
-
-		realirq = (realirq & 7) + 8;
-	}
-
-	/* mask and ack interrupt */
-	cached_irq_mask |= 1 << realirq;
-	if (unlikely(realirq > 7)) {
-		inb(0xa1);
-		outb(cached_slave_mask, 0xa1);
-		outb(0x60 + (realirq & 7), 0xa0);
-		outb(0x60 + 2, 0x20);
-	} else {
-		inb(0x21);
-		outb(cached_master_mask, 0x21);
-		outb(0x60 + realirq, 0x20);
-	}
-
-	raw_spin_unlock_irqrestore(&i8259A_lock, flags);
-
-	/*
-	 * handle this 'virtual interrupt' as a Cobalt one now.
-	 */
-	generic_handle_irq(realirq);
-
-	return IRQ_HANDLED;
-
-out_unlock:
-	raw_spin_unlock_irqrestore(&i8259A_lock, flags);
-	return IRQ_NONE;
-}
-
-static struct irqaction master_action = {
-	.handler =	piix4_master_intr,
-	.name =		"PIIX4-8259",
-	.flags =	IRQF_NO_THREAD,
-};
-
-static struct irqaction cascade_action = {
-	.handler = 	no_action,
-	.name =		"cascade",
-	.flags =	IRQF_NO_THREAD,
-};
-
-static inline void set_piix4_virtual_irq_type(void)
-{
-	piix4_virtual_irq_type.irq_enable = i8259A_chip.irq_unmask;
-	piix4_virtual_irq_type.irq_disable = i8259A_chip.irq_mask;
-	piix4_virtual_irq_type.irq_unmask = i8259A_chip.irq_unmask;
-}
-
-static void __init visws_pre_intr_init(void)
-{
-	int i;
-
-	set_piix4_virtual_irq_type();
-
-	for (i = 0; i < CO_IRQ_APIC0 + CO_APIC_LAST + 1; i++) {
-		struct irq_chip *chip = NULL;
-
-		if (i == 0)
-			chip = &cobalt_irq_type;
-		else if (i == CO_IRQ_IDE0)
-			chip = &cobalt_irq_type;
-		else if (i == CO_IRQ_IDE1)
-			chip = &cobalt_irq_type;
-		else if (i == CO_IRQ_8259)
-			chip = &piix4_master_irq_type;
-		else if (i < CO_IRQ_APIC0)
-			chip = &piix4_virtual_irq_type;
-		else if (IS_CO_APIC(i))
-			chip = &cobalt_irq_type;
-
-		if (chip)
-			irq_set_chip(i, chip);
-	}
-
-	setup_irq(CO_IRQ_8259, &master_action);
-	setup_irq(2, &cascade_action);
-}
diff --git a/arch/x86/xen/Kconfig b/arch/x86/xen/Kconfig
index 01b9026..9c50cc2 100644
--- a/arch/x86/xen/Kconfig
+++ b/arch/x86/xen/Kconfig
@@ -7,7 +7,7 @@ config XEN
 	depends on PARAVIRT
 	select PARAVIRT_CLOCK
 	select XEN_HAVE_PVMMU
-	depends on X86_64 || (X86_32 && X86_PAE && !X86_VISWS)
+	depends on X86_64 || (X86_32 && X86_PAE)
 	depends on X86_TSC
 	help
 	  This is the Linux Xen port.  Enabling this will allow the
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 17d2b07..9d5ee4d 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -42,7 +42,6 @@ obj-$(CONFIG_SUPERH) += setup-bus.o setup-irq.o
 obj-$(CONFIG_PPC) += setup-bus.o
 obj-$(CONFIG_FRV) += setup-bus.o
 obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o
-obj-$(CONFIG_X86_VISWS) += setup-irq.o
 obj-$(CONFIG_MN10300) += setup-bus.o
 obj-$(CONFIG_MICROBLAZE) += setup-bus.o
 obj-$(CONFIG_TILE) += setup-bus.o setup-irq.o
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index 97dabd3..1580205 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -379,14 +379,7 @@
 #define  DEBUG_PRINT_NVRAM	0
 #define  DEBUG_QLA1280		0
 
-/*
- * The SGI VISWS is broken and doesn't support MMIO ;-(
- */
-#ifdef CONFIG_X86_VISWS
-#define	MEMORY_MAPPED_IO	0
-#else
 #define	MEMORY_MAPPED_IO	1
-#endif
 
 #include "qla1280.h"
 
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 22262a3..acc0493 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -802,18 +802,9 @@ config FB_HGA
 	  As this card technology is at least 25 years old,
 	  most people will answer N here.
 
-config FB_SGIVW
-	tristate "SGI Visual Workstation framebuffer support"
-	depends on FB && X86_VISWS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  SGI Visual Workstation support for framebuffer graphics.
-
 config FB_GBE
 	bool "SGI Graphics Backend frame buffer support"
-	depends on (FB = y) && (SGI_IP32 || X86_VISWS)
+	depends on (FB = y) && SGI_IP32
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index ae17ddf..dc09617 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -75,7 +75,6 @@ obj-$(CONFIG_FB_CG14)             += cg14.o sbuslib.o
 obj-$(CONFIG_FB_P9100)            += p9100.o sbuslib.o
 obj-$(CONFIG_FB_TCX)              += tcx.o sbuslib.o
 obj-$(CONFIG_FB_LEO)              += leo.o sbuslib.o
-obj-$(CONFIG_FB_SGIVW)            += sgivwfb.o
 obj-$(CONFIG_FB_ACORN)            += acornfb.o
 obj-$(CONFIG_FB_ATARI)            += atafb.o c2p_iplan2.o atafb_mfb.o \
                                      atafb_iplan2p2.o atafb_iplan2p4.o atafb_iplan2p8.o
diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c
index 4c7cb36..3ec65a8 100644
--- a/drivers/video/gbefb.c
+++ b/drivers/video/gbefb.c
@@ -45,10 +45,6 @@ struct gbefb_par {
 #define GBE_BASE	0x16000000 /* SGI O2 */
 #endif
 
-#ifdef CONFIG_X86_VISWS
-#define GBE_BASE	0xd0000000 /* SGI Visual Workstation */
-#endif
-
 /* macro for fastest write-though access to the framebuffer */
 #ifdef CONFIG_MIPS
 #ifdef CONFIG_CPU_R10000
diff --git a/drivers/video/logo/Kconfig b/drivers/video/logo/Kconfig
index 39ac49e..0037104 100644
--- a/drivers/video/logo/Kconfig
+++ b/drivers/video/logo/Kconfig
@@ -54,7 +54,7 @@ config LOGO_PARISC_CLUT224
 
 config LOGO_SGI_CLUT224
 	bool "224-color SGI Linux logo"
-	depends on SGI_IP22 || SGI_IP27 || SGI_IP32 || X86_VISWS
+	depends on SGI_IP22 || SGI_IP27 || SGI_IP32
 	default y
 
 config LOGO_SUN_CLUT224
diff --git a/drivers/video/logo/logo.c b/drivers/video/logo/logo.c
index b670cbd..940cd19 100644
--- a/drivers/video/logo/logo.c
+++ b/drivers/video/logo/logo.c
@@ -81,7 +81,7 @@ const struct linux_logo * __init_refok fb_find_logo(int depth)
 		logo = &logo_parisc_clut224;
 #endif
 #ifdef CONFIG_LOGO_SGI_CLUT224
-		/* SGI Linux logo on MIPS/MIPS64 and VISWS */
+		/* SGI Linux logo on MIPS/MIPS64 */
 		logo = &logo_sgi_clut224;
 #endif
 #ifdef CONFIG_LOGO_SUN_CLUT224
diff --git a/drivers/video/sgivwfb.c b/drivers/video/sgivwfb.c
deleted file mode 100644
index bc74d04..0000000
--- a/drivers/video/sgivwfb.c
+++ /dev/null
@@ -1,889 +0,0 @@
-/*
- *  linux/drivers/video/sgivwfb.c -- SGI DBE frame buffer device
- *
- *	Copyright (C) 1999 Silicon Graphics, Inc.
- *      Jeffrey Newquist, newquist@xxxxxxxxxxxx
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License. See the file COPYING in the main directory of this archive for
- *  more details.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-
-#include <asm/io.h>
-#include <asm/mtrr.h>
-#include <asm/visws/sgivw.h>
-
-#define INCLUDE_TIMING_TABLE_DATA
-#define DBE_REG_BASE par->regs
-#include <video/sgivw.h>
-
-struct sgivw_par {
-	struct asregs *regs;
-	u32 cmap_fifo;
-	u_long timing_num;
-};
-
-#define FLATPANEL_SGI_1600SW	5
-
-/*
- *  RAM we reserve for the frame buffer. This defines the maximum screen
- *  size
- *
- *  The default can be overridden if the driver is compiled as a module
- */
-
-static int ypan = 0;
-static int ywrap = 0;
-
-static int flatpanel_id = -1;
-
-static struct fb_fix_screeninfo sgivwfb_fix = {
-	.id		= "SGI Vis WS FB",
-	.type		= FB_TYPE_PACKED_PIXELS,
-        .visual		= FB_VISUAL_PSEUDOCOLOR,
-	.mmio_start	= DBE_REG_PHYS,
-	.mmio_len	= DBE_REG_SIZE,
-        .accel		= FB_ACCEL_NONE,
-	.line_length	= 640,
-};
-
-static struct fb_var_screeninfo sgivwfb_var = {
-	/* 640x480, 8 bpp */
-	.xres		= 640,
-	.yres		= 480,
-	.xres_virtual	= 640,
-	.yres_virtual	= 480,
-	.bits_per_pixel	= 8,
-	.red		= { 0, 8, 0 },
-	.green		= { 0, 8, 0 },
-	.blue		= { 0, 8, 0 },
-	.height		= -1,
-	.width		= -1,
-	.pixclock	= 20000,
-	.left_margin	= 64,
-	.right_margin	= 64,
-	.upper_margin	= 32,
-	.lower_margin	= 32,
-	.hsync_len	= 64,
-	.vsync_len	= 2,
-	.vmode		= FB_VMODE_NONINTERLACED
-};
-
-static struct fb_var_screeninfo sgivwfb_var1600sw = {
-	/* 1600x1024, 8 bpp */
-	.xres		= 1600,
-	.yres		= 1024,
-	.xres_virtual	= 1600,
-	.yres_virtual	= 1024,
-	.bits_per_pixel	= 8,
-	.red		= { 0, 8, 0 },
-	.green		= { 0, 8, 0 },
-	.blue		= { 0, 8, 0 },
-	.height		= -1,
-	.width		= -1,
-	.pixclock	= 9353,
-	.left_margin	= 20,
-	.right_margin	= 30,
-	.upper_margin	= 37,
-	.lower_margin	= 3,
-	.hsync_len	= 20,
-	.vsync_len	= 3,
-	.vmode		= FB_VMODE_NONINTERLACED
-};
-
-/*
- *  Interface used by the world
- */
-int sgivwfb_init(void);
-
-static int sgivwfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info);
-static int sgivwfb_set_par(struct fb_info *info);
-static int sgivwfb_setcolreg(u_int regno, u_int red, u_int green,
-			     u_int blue, u_int transp,
-			     struct fb_info *info);
-static int sgivwfb_mmap(struct fb_info *info,
-			struct vm_area_struct *vma);
-
-static struct fb_ops sgivwfb_ops = {
-	.owner		= THIS_MODULE,
-	.fb_check_var	= sgivwfb_check_var,
-	.fb_set_par	= sgivwfb_set_par,
-	.fb_setcolreg	= sgivwfb_setcolreg,
-	.fb_fillrect	= cfb_fillrect,
-	.fb_copyarea	= cfb_copyarea,
-	.fb_imageblit	= cfb_imageblit,
-	.fb_mmap	= sgivwfb_mmap,
-};
-
-/*
- *  Internal routines
- */
-static unsigned long bytes_per_pixel(int bpp)
-{
-	switch (bpp) {
-		case 8:
-			return 1;
-		case 16:
-			return 2;
-		case 32:
-			return 4;
-		default:
-			printk(KERN_INFO "sgivwfb: unsupported bpp %d\n", bpp);
-			return 0;
-	}
-}
-
-static unsigned long get_line_length(int xres_virtual, int bpp)
-{
-	return (xres_virtual * bytes_per_pixel(bpp));
-}
-
-/*
- * Function:	dbe_TurnOffDma
- * Parameters:	(None)
- * Description:	This should turn off the monitor and dbe.  This is used
- *              when switching between the serial console and the graphics
- *              console.
- */
-
-static void dbe_TurnOffDma(struct sgivw_par *par)
-{
-	unsigned int readVal;
-	int i;
-
-	// Check to see if things are already turned off:
-	// 1) Check to see if dbe is not using the internal dotclock.
-	// 2) Check to see if the xy counter in dbe is already off.
-
-	DBE_GETREG(ctrlstat, readVal);
-	if (GET_DBE_FIELD(CTRLSTAT, PCLKSEL, readVal) < 2)
-		return;
-
-	DBE_GETREG(vt_xy, readVal);
-	if (GET_DBE_FIELD(VT_XY, VT_FREEZE, readVal) == 1)
-		return;
-
-	// Otherwise, turn off dbe
-
-	DBE_GETREG(ovr_control, readVal);
-	SET_DBE_FIELD(OVR_CONTROL, OVR_DMA_ENABLE, readVal, 0);
-	DBE_SETREG(ovr_control, readVal);
-	udelay(1000);
-	DBE_GETREG(frm_control, readVal);
-	SET_DBE_FIELD(FRM_CONTROL, FRM_DMA_ENABLE, readVal, 0);
-	DBE_SETREG(frm_control, readVal);
-	udelay(1000);
-	DBE_GETREG(did_control, readVal);
-	SET_DBE_FIELD(DID_CONTROL, DID_DMA_ENABLE, readVal, 0);
-	DBE_SETREG(did_control, readVal);
-	udelay(1000);
-
-	// XXX HACK:
-	//
-	//    This was necessary for GBE--we had to wait through two
-	//    vertical retrace periods before the pixel DMA was
-	//    turned off for sure.  I've left this in for now, in
-	//    case dbe needs it.
-
-	for (i = 0; i < 10000; i++) {
-		DBE_GETREG(frm_inhwctrl, readVal);
-		if (GET_DBE_FIELD(FRM_INHWCTRL, FRM_DMA_ENABLE, readVal) ==
-		    0)
-			udelay(10);
-		else {
-			DBE_GETREG(ovr_inhwctrl, readVal);
-			if (GET_DBE_FIELD
-			    (OVR_INHWCTRL, OVR_DMA_ENABLE, readVal) == 0)
-				udelay(10);
-			else {
-				DBE_GETREG(did_inhwctrl, readVal);
-				if (GET_DBE_FIELD
-				    (DID_INHWCTRL, DID_DMA_ENABLE,
-				     readVal) == 0)
-					udelay(10);
-				else
-					break;
-			}
-		}
-	}
-}
-
-/*
- *  Set the User Defined Part of the Display. Again if par use it to get
- *  real video mode.
- */
-static int sgivwfb_check_var(struct fb_var_screeninfo *var, 
-			     struct fb_info *info)
-{
-	struct sgivw_par *par = (struct sgivw_par *)info->par;
-	struct dbe_timing_info *timing;
-	u_long line_length;
-	u_long min_mode;
-	int req_dot;
-	int test_mode;
-
-	/*
-	 *  FB_VMODE_CONUPDATE and FB_VMODE_SMOOTH_XPAN are equal!
-	 *  as FB_VMODE_SMOOTH_XPAN is only used internally
-	 */
-
-	if (var->vmode & FB_VMODE_CONUPDATE) {
-		var->vmode |= FB_VMODE_YWRAP;
-		var->xoffset = info->var.xoffset;
-		var->yoffset = info->var.yoffset;
-	}
-
-	/* XXX FIXME - forcing var's */
-	var->xoffset = 0;
-	var->yoffset = 0;
-
-	/* Limit bpp to 8, 16, and 32 */
-	if (var->bits_per_pixel <= 8)
-		var->bits_per_pixel = 8;
-	else if (var->bits_per_pixel <= 16)
-		var->bits_per_pixel = 16;
-	else if (var->bits_per_pixel <= 32)
-		var->bits_per_pixel = 32;
-	else
-		return -EINVAL;
-
-	var->grayscale = 0;	/* No grayscale for now */
-
-	/* determine valid resolution and timing */
-	for (min_mode = 0; min_mode < ARRAY_SIZE(dbeVTimings); min_mode++) {
-		if (dbeVTimings[min_mode].width >= var->xres &&
-		    dbeVTimings[min_mode].height >= var->yres)
-			break;
-	}
-
-	if (min_mode == ARRAY_SIZE(dbeVTimings))
-		return -EINVAL;	/* Resolution to high */
-
-	/* XXX FIXME - should try to pick best refresh rate */
-	/* for now, pick closest dot-clock within 3MHz */
-	req_dot = PICOS2KHZ(var->pixclock);
-	printk(KERN_INFO "sgivwfb: requested pixclock=%d ps (%d KHz)\n",
-	       var->pixclock, req_dot);
-	test_mode = min_mode;
-	while (dbeVTimings[min_mode].width == dbeVTimings[test_mode].width) {
-		if (dbeVTimings[test_mode].cfreq + 3000 > req_dot)
-			break;
-		test_mode++;
-	}
-	if (dbeVTimings[min_mode].width != dbeVTimings[test_mode].width)
-		test_mode--;
-	min_mode = test_mode;
-	timing = &dbeVTimings[min_mode];
-	printk(KERN_INFO "sgivwfb: granted dot-clock=%d KHz\n", timing->cfreq);
-
-	/* Adjust virtual resolution, if necessary */
-	if (var->xres > var->xres_virtual || (!ywrap && !ypan))
-		var->xres_virtual = var->xres;
-	if (var->yres > var->yres_virtual || (!ywrap && !ypan))
-		var->yres_virtual = var->yres;
-
-	/*
-	 *  Memory limit
-	 */
-	line_length = get_line_length(var->xres_virtual, var->bits_per_pixel);
-	if (line_length * var->yres_virtual > sgivwfb_mem_size)
-		return -ENOMEM;	/* Virtual resolution to high */
-
-	info->fix.line_length = line_length;
-
-	switch (var->bits_per_pixel) {
-	case 8:
-		var->red.offset = 0;
-		var->red.length = 8;
-		var->green.offset = 0;
-		var->green.length = 8;
-		var->blue.offset = 0;
-		var->blue.length = 8;
-		var->transp.offset = 0;
-		var->transp.length = 0;
-		break;
-	case 16:		/* RGBA 5551 */
-		var->red.offset = 11;
-		var->red.length = 5;
-		var->green.offset = 6;
-		var->green.length = 5;
-		var->blue.offset = 1;
-		var->blue.length = 5;
-		var->transp.offset = 0;
-		var->transp.length = 0;
-		break;
-	case 32:		/* RGB 8888 */
-		var->red.offset = 0;
-		var->red.length = 8;
-		var->green.offset = 8;
-		var->green.length = 8;
-		var->blue.offset = 16;
-		var->blue.length = 8;
-		var->transp.offset = 24;
-		var->transp.length = 8;
-		break;
-	}
-	var->red.msb_right = 0;
-	var->green.msb_right = 0;
-	var->blue.msb_right = 0;
-	var->transp.msb_right = 0;
-
-	/* set video timing information */
-	var->pixclock = KHZ2PICOS(timing->cfreq);
-	var->left_margin = timing->htotal - timing->hsync_end;
-	var->right_margin = timing->hsync_start - timing->width;
-	var->upper_margin = timing->vtotal - timing->vsync_end;
-	var->lower_margin = timing->vsync_start - timing->height;
-	var->hsync_len = timing->hsync_end - timing->hsync_start;
-	var->vsync_len = timing->vsync_end - timing->vsync_start;
-
-	/* Ouch. This breaks the rules but timing_num is only important if you
-	* change a video mode */
-	par->timing_num = min_mode;
-
-	printk(KERN_INFO "sgivwfb: new video mode xres=%d yres=%d bpp=%d\n",
-		var->xres, var->yres, var->bits_per_pixel);
-	printk(KERN_INFO "         vxres=%d vyres=%d\n", var->xres_virtual,
-		var->yres_virtual);
-	return 0;
-}
-
-/*
- *  Setup flatpanel related registers.
- */
-static void sgivwfb_setup_flatpanel(struct sgivw_par *par, struct dbe_timing_info *currentTiming)
-{
-	int fp_wid, fp_hgt, fp_vbs, fp_vbe;
-	u32 outputVal = 0;
-
-	SET_DBE_FIELD(VT_FLAGS, HDRV_INVERT, outputVal, 
-		(currentTiming->flags & FB_SYNC_HOR_HIGH_ACT) ? 0 : 1);
-	SET_DBE_FIELD(VT_FLAGS, VDRV_INVERT, outputVal, 
-		(currentTiming->flags & FB_SYNC_VERT_HIGH_ACT) ? 0 : 1);
-	DBE_SETREG(vt_flags, outputVal);
-
-	/* Turn on the flat panel */
-	switch (flatpanel_id) {
-		case FLATPANEL_SGI_1600SW:
-			fp_wid = 1600;
-			fp_hgt = 1024;
-			fp_vbs = 0;
-			fp_vbe = 1600;
-			currentTiming->pll_m = 4;
-			currentTiming->pll_n = 1;
-			currentTiming->pll_p = 0;
-			break;
-		default:
-      			fp_wid = fp_hgt = fp_vbs = fp_vbe = 0xfff;
-  	}
-
-	outputVal = 0;
-	SET_DBE_FIELD(FP_DE, FP_DE_ON, outputVal, fp_vbs);
-	SET_DBE_FIELD(FP_DE, FP_DE_OFF, outputVal, fp_vbe);
-	DBE_SETREG(fp_de, outputVal);
-	outputVal = 0;
-	SET_DBE_FIELD(FP_HDRV, FP_HDRV_OFF, outputVal, fp_wid);
-	DBE_SETREG(fp_hdrv, outputVal);
-	outputVal = 0;
-	SET_DBE_FIELD(FP_VDRV, FP_VDRV_ON, outputVal, 1);
-	SET_DBE_FIELD(FP_VDRV, FP_VDRV_OFF, outputVal, fp_hgt + 1);
-	DBE_SETREG(fp_vdrv, outputVal);
-}
-
-/*
- *  Set the hardware according to 'par'.
- */
-static int sgivwfb_set_par(struct fb_info *info)
-{
-	struct sgivw_par *par = info->par;
-	int i, j, htmp, temp;
-	u32 readVal, outputVal;
-	int wholeTilesX, maxPixelsPerTileX;
-	int frmWrite1, frmWrite2, frmWrite3b;
-	struct dbe_timing_info *currentTiming; /* Current Video Timing */
-	int xpmax, ypmax;	// Monitor resolution
-	int bytesPerPixel;	// Bytes per pixel
-
-	currentTiming = &dbeVTimings[par->timing_num];
-	bytesPerPixel = bytes_per_pixel(info->var.bits_per_pixel);
-	xpmax = currentTiming->width;
-	ypmax = currentTiming->height;
-
-	/* dbe_InitGraphicsBase(); */
-	/* Turn on dotclock PLL */
-	DBE_SETREG(ctrlstat, 0x20000000);
-
-	dbe_TurnOffDma(par);
-
-	/* dbe_CalculateScreenParams(); */
-	maxPixelsPerTileX = 512 / bytesPerPixel;
-	wholeTilesX = xpmax / maxPixelsPerTileX;
-	if (wholeTilesX * maxPixelsPerTileX < xpmax)
-		wholeTilesX++;
-
-	printk(KERN_DEBUG "sgivwfb: pixPerTile=%d wholeTilesX=%d\n",
-	       maxPixelsPerTileX, wholeTilesX);
-
-	/* dbe_InitGammaMap(); */
-	udelay(10);
-
-	for (i = 0; i < 256; i++) {
-		DBE_ISETREG(gmap, i, (i << 24) | (i << 16) | (i << 8));
-	}
-
-	/* dbe_TurnOn(); */
-	DBE_GETREG(vt_xy, readVal);
-	if (GET_DBE_FIELD(VT_XY, VT_FREEZE, readVal) == 1) {
-		DBE_SETREG(vt_xy, 0x00000000);
-		udelay(1);
-	} else
-		dbe_TurnOffDma(par);
-
-	/* dbe_Initdbe(); */
-	for (i = 0; i < 256; i++) {
-		for (j = 0; j < 100; j++) {
-			DBE_GETREG(cm_fifo, readVal);
-			if (readVal != 0x00000000)
-				break;
-			else
-				udelay(10);
-		}
-
-		// DBE_ISETREG(cmap, i, 0x00000000);
-		DBE_ISETREG(cmap, i, (i << 8) | (i << 16) | (i << 24));
-	}
-
-	/* dbe_InitFramebuffer(); */
-	frmWrite1 = 0;
-	SET_DBE_FIELD(FRM_SIZE_TILE, FRM_WIDTH_TILE, frmWrite1,
-		      wholeTilesX);
-	SET_DBE_FIELD(FRM_SIZE_TILE, FRM_RHS, frmWrite1, 0);
-
-	switch (bytesPerPixel) {
-	case 1:
-		SET_DBE_FIELD(FRM_SIZE_TILE, FRM_DEPTH, frmWrite1,
-			      DBE_FRM_DEPTH_8);
-		break;
-	case 2:
-		SET_DBE_FIELD(FRM_SIZE_TILE, FRM_DEPTH, frmWrite1,
-			      DBE_FRM_DEPTH_16);
-		break;
-	case 4:
-		SET_DBE_FIELD(FRM_SIZE_TILE, FRM_DEPTH, frmWrite1,
-			      DBE_FRM_DEPTH_32);
-		break;
-	}
-
-	frmWrite2 = 0;
-	SET_DBE_FIELD(FRM_SIZE_PIXEL, FB_HEIGHT_PIX, frmWrite2, ypmax);
-
-	// Tell dbe about the framebuffer location and type
-	// XXX What format is the FRM_TILE_PTR??  64K aligned address?
-	frmWrite3b = 0;
-	SET_DBE_FIELD(FRM_CONTROL, FRM_TILE_PTR, frmWrite3b,
-		      sgivwfb_mem_phys >> 9);
-	SET_DBE_FIELD(FRM_CONTROL, FRM_DMA_ENABLE, frmWrite3b, 1);
-	SET_DBE_FIELD(FRM_CONTROL, FRM_LINEAR, frmWrite3b, 1);
-
-	/* Initialize DIDs */
-
-	outputVal = 0;
-	switch (bytesPerPixel) {
-	case 1:
-		SET_DBE_FIELD(WID, TYP, outputVal, DBE_CMODE_I8);
-		break;
-	case 2:
-		SET_DBE_FIELD(WID, TYP, outputVal, DBE_CMODE_RGBA5);
-		break;
-	case 4:
-		SET_DBE_FIELD(WID, TYP, outputVal, DBE_CMODE_RGB8);
-		break;
-	}
-	SET_DBE_FIELD(WID, BUF, outputVal, DBE_BMODE_BOTH);
-
-	for (i = 0; i < 32; i++) {
-		DBE_ISETREG(mode_regs, i, outputVal);
-	}
-
-	/* dbe_InitTiming(); */
-	DBE_SETREG(vt_intr01, 0xffffffff);
-	DBE_SETREG(vt_intr23, 0xffffffff);
-
-	DBE_GETREG(dotclock, readVal);
-	DBE_SETREG(dotclock, readVal & 0xffff);
-
-	DBE_SETREG(vt_xymax, 0x00000000);
-	outputVal = 0;
-	SET_DBE_FIELD(VT_VSYNC, VT_VSYNC_ON, outputVal,
-		      currentTiming->vsync_start);
-	SET_DBE_FIELD(VT_VSYNC, VT_VSYNC_OFF, outputVal,
-		      currentTiming->vsync_end);
-	DBE_SETREG(vt_vsync, outputVal);
-	outputVal = 0;
-	SET_DBE_FIELD(VT_HSYNC, VT_HSYNC_ON, outputVal,
-		      currentTiming->hsync_start);
-	SET_DBE_FIELD(VT_HSYNC, VT_HSYNC_OFF, outputVal,
-		      currentTiming->hsync_end);
-	DBE_SETREG(vt_hsync, outputVal);
-	outputVal = 0;
-	SET_DBE_FIELD(VT_VBLANK, VT_VBLANK_ON, outputVal,
-		      currentTiming->vblank_start);
-	SET_DBE_FIELD(VT_VBLANK, VT_VBLANK_OFF, outputVal,
-		      currentTiming->vblank_end);
-	DBE_SETREG(vt_vblank, outputVal);
-	outputVal = 0;
-	SET_DBE_FIELD(VT_HBLANK, VT_HBLANK_ON, outputVal,
-		      currentTiming->hblank_start);
-	SET_DBE_FIELD(VT_HBLANK, VT_HBLANK_OFF, outputVal,
-		      currentTiming->hblank_end - 3);
-	DBE_SETREG(vt_hblank, outputVal);
-	outputVal = 0;
-	SET_DBE_FIELD(VT_VCMAP, VT_VCMAP_ON, outputVal,
-		      currentTiming->vblank_start);
-	SET_DBE_FIELD(VT_VCMAP, VT_VCMAP_OFF, outputVal,
-		      currentTiming->vblank_end);
-	DBE_SETREG(vt_vcmap, outputVal);
-	outputVal = 0;
-	SET_DBE_FIELD(VT_HCMAP, VT_HCMAP_ON, outputVal,
-		      currentTiming->hblank_start);
-	SET_DBE_FIELD(VT_HCMAP, VT_HCMAP_OFF, outputVal,
-		      currentTiming->hblank_end - 3);
-	DBE_SETREG(vt_hcmap, outputVal);
-
-	if (flatpanel_id != -1)
-		sgivwfb_setup_flatpanel(par, currentTiming);
-
-	outputVal = 0;
-	temp = currentTiming->vblank_start - currentTiming->vblank_end - 1;
-	if (temp > 0)
-		temp = -temp;
-
-	SET_DBE_FIELD(DID_START_XY, DID_STARTY, outputVal, (u32) temp);
-	if (currentTiming->hblank_end >= 20)
-		SET_DBE_FIELD(DID_START_XY, DID_STARTX, outputVal,
-			      currentTiming->hblank_end - 20);
-	else
-		SET_DBE_FIELD(DID_START_XY, DID_STARTX, outputVal,
-			      currentTiming->htotal - (20 -
-						       currentTiming->
-						       hblank_end));
-	DBE_SETREG(did_start_xy, outputVal);
-
-	outputVal = 0;
-	SET_DBE_FIELD(CRS_START_XY, CRS_STARTY, outputVal,
-		      (u32) (temp + 1));
-	if (currentTiming->hblank_end >= DBE_CRS_MAGIC)
-		SET_DBE_FIELD(CRS_START_XY, CRS_STARTX, outputVal,
-			      currentTiming->hblank_end - DBE_CRS_MAGIC);
-	else
-		SET_DBE_FIELD(CRS_START_XY, CRS_STARTX, outputVal,
-			      currentTiming->htotal - (DBE_CRS_MAGIC -
-						       currentTiming->
-						       hblank_end));
-	DBE_SETREG(crs_start_xy, outputVal);
-
-	outputVal = 0;
-	SET_DBE_FIELD(VC_START_XY, VC_STARTY, outputVal, (u32) temp);
-	SET_DBE_FIELD(VC_START_XY, VC_STARTX, outputVal,
-		      currentTiming->hblank_end - 4);
-	DBE_SETREG(vc_start_xy, outputVal);
-
-	DBE_SETREG(frm_size_tile, frmWrite1);
-	DBE_SETREG(frm_size_pixel, frmWrite2);
-
-	outputVal = 0;
-	SET_DBE_FIELD(DOTCLK, M, outputVal, currentTiming->pll_m - 1);
-	SET_DBE_FIELD(DOTCLK, N, outputVal, currentTiming->pll_n - 1);
-	SET_DBE_FIELD(DOTCLK, P, outputVal, currentTiming->pll_p);
-	SET_DBE_FIELD(DOTCLK, RUN, outputVal, 1);
-	DBE_SETREG(dotclock, outputVal);
-
-	udelay(11 * 1000);
-
-	DBE_SETREG(vt_vpixen, 0xffffff);
-	DBE_SETREG(vt_hpixen, 0xffffff);
-
-	outputVal = 0;
-	SET_DBE_FIELD(VT_XYMAX, VT_MAXX, outputVal, currentTiming->htotal);
-	SET_DBE_FIELD(VT_XYMAX, VT_MAXY, outputVal, currentTiming->vtotal);
-	DBE_SETREG(vt_xymax, outputVal);
-
-	outputVal = frmWrite1;
-	SET_DBE_FIELD(FRM_SIZE_TILE, FRM_FIFO_RESET, outputVal, 1);
-	DBE_SETREG(frm_size_tile, outputVal);
-	DBE_SETREG(frm_size_tile, frmWrite1);
-
-	outputVal = 0;
-	SET_DBE_FIELD(OVR_WIDTH_TILE, OVR_FIFO_RESET, outputVal, 1);
-	DBE_SETREG(ovr_width_tile, outputVal);
-	DBE_SETREG(ovr_width_tile, 0);
-
-	DBE_SETREG(frm_control, frmWrite3b);
-	DBE_SETREG(did_control, 0);
-
-	// Wait for dbe to take frame settings
-	for (i = 0; i < 100000; i++) {
-		DBE_GETREG(frm_inhwctrl, readVal);
-		if (GET_DBE_FIELD(FRM_INHWCTRL, FRM_DMA_ENABLE, readVal) !=
-		    0)
-			break;
-		else
-			udelay(1);
-	}
-
-	if (i == 100000)
-		printk(KERN_INFO
-		       "sgivwfb: timeout waiting for frame DMA enable.\n");
-
-	outputVal = 0;
-	htmp = currentTiming->hblank_end - 19;
-	if (htmp < 0)
-		htmp += currentTiming->htotal;	/* allow blank to wrap around */
-	SET_DBE_FIELD(VT_HPIXEN, VT_HPIXEN_ON, outputVal, htmp);
-	SET_DBE_FIELD(VT_HPIXEN, VT_HPIXEN_OFF, outputVal,
-		      ((htmp + currentTiming->width -
-			2) % currentTiming->htotal));
-	DBE_SETREG(vt_hpixen, outputVal);
-
-	outputVal = 0;
-	SET_DBE_FIELD(VT_VPIXEN, VT_VPIXEN_OFF, outputVal,
-		      currentTiming->vblank_start);
-	SET_DBE_FIELD(VT_VPIXEN, VT_VPIXEN_ON, outputVal,
-		      currentTiming->vblank_end);
-	DBE_SETREG(vt_vpixen, outputVal);
-
-	// Turn off mouse cursor
-	par->regs->crs_ctl = 0;
-
-	// XXX What's this section for??
-	DBE_GETREG(ctrlstat, readVal);
-	readVal &= 0x02000000;
-
-	if (readVal != 0) {
-		DBE_SETREG(ctrlstat, 0x30000000);
-	}
-	return 0;
-}
-
-/*
- *  Set a single color register. The values supplied are already
- *  rounded down to the hardware's capabilities (according to the
- *  entries in the var structure). Return != 0 for invalid regno.
- */
-
-static int sgivwfb_setcolreg(u_int regno, u_int red, u_int green,
-			     u_int blue, u_int transp,
-			     struct fb_info *info)
-{
-	struct sgivw_par *par = (struct sgivw_par *) info->par;
-
-	if (regno > 255)
-		return 1;
-	red >>= 8;
-	green >>= 8;
-	blue >>= 8;
-
-	/* wait for the color map FIFO to have a free entry */
-	while (par->cmap_fifo == 0)
-		par->cmap_fifo = par->regs->cm_fifo;
-
-	par->regs->cmap[regno] = (red << 24) | (green << 16) | (blue << 8);
-	par->cmap_fifo--;	/* assume FIFO is filling up */
-	return 0;
-}
-
-static int sgivwfb_mmap(struct fb_info *info,
-			struct vm_area_struct *vma)
-{
-	int r;
-
-	pgprot_val(vma->vm_page_prot) =
-		pgprot_val(vma->vm_page_prot) | _PAGE_PCD;
-
-	r = vm_iomap_memory(vma, sgivwfb_mem_phys, sgivwfb_mem_size);
-
-	printk(KERN_DEBUG "sgivwfb: mmap framebuffer P(%lx)->V(%lx)\n",
-		sgivwfb_mem_phys + (vma->vm_pgoff << PAGE_SHIFT), vma->vm_start);
-
-	return r;
-}
-
-int __init sgivwfb_setup(char *options)
-{
-	char *this_opt;
-
-	if (!options || !*options)
-		return 0;
-
-	while ((this_opt = strsep(&options, ",")) != NULL) {
-		if (!strncmp(this_opt, "monitor:", 8)) {
-			if (!strncmp(this_opt + 8, "crt", 3))
-				flatpanel_id = -1;
-			else if (!strncmp(this_opt + 8, "1600sw", 6))
-				flatpanel_id = FLATPANEL_SGI_1600SW;
-		}
-	}
-	return 0;
-}
-
-/*
- *  Initialisation
- */
-static int sgivwfb_probe(struct platform_device *dev)
-{
-	struct sgivw_par *par;
-	struct fb_info *info;
-	char *monitor;
-
-	info = framebuffer_alloc(sizeof(struct sgivw_par) + sizeof(u32) * 16, &dev->dev);
-	if (!info)
-		return -ENOMEM;
-	par = info->par;
-
-	if (!request_mem_region(DBE_REG_PHYS, DBE_REG_SIZE, "sgivwfb")) {
-		printk(KERN_ERR "sgivwfb: couldn't reserve mmio region\n");
-		framebuffer_release(info);
-		return -EBUSY;
-	}
-
-	par->regs = (struct asregs *) ioremap_nocache(DBE_REG_PHYS, DBE_REG_SIZE);
-	if (!par->regs) {
-		printk(KERN_ERR "sgivwfb: couldn't ioremap registers\n");
-		goto fail_ioremap_regs;
-	}
-
-	mtrr_add(sgivwfb_mem_phys, sgivwfb_mem_size, MTRR_TYPE_WRCOMB, 1);
-
-	sgivwfb_fix.smem_start = sgivwfb_mem_phys;
-	sgivwfb_fix.smem_len = sgivwfb_mem_size;
-	sgivwfb_fix.ywrapstep = ywrap;
-	sgivwfb_fix.ypanstep = ypan;
-
-	info->fix = sgivwfb_fix;
-
-	switch (flatpanel_id) {
-		case FLATPANEL_SGI_1600SW:
-			info->var = sgivwfb_var1600sw;
-			monitor = "SGI 1600SW flatpanel";
-			break;
-		default:
-			info->var = sgivwfb_var;
-			monitor = "CRT";
-	}
-
-	printk(KERN_INFO "sgivwfb: %s monitor selected\n", monitor);
-
-	info->fbops = &sgivwfb_ops;
-	info->pseudo_palette = (void *) (par + 1);
-	info->flags = FBINFO_DEFAULT;
-
-	info->screen_base = ioremap_nocache((unsigned long) sgivwfb_mem_phys, sgivwfb_mem_size);
-	if (!info->screen_base) {
-		printk(KERN_ERR "sgivwfb: couldn't ioremap screen_base\n");
-		goto fail_ioremap_fbmem;
-	}
-
-	if (fb_alloc_cmap(&info->cmap, 256, 0) < 0)
-		goto fail_color_map;
-
-	if (register_framebuffer(info) < 0) {
-		printk(KERN_ERR "sgivwfb: couldn't register framebuffer\n");
-		goto fail_register_framebuffer;
-	}
-
-	platform_set_drvdata(dev, info);
-
-	fb_info(info, "SGI DBE frame buffer device, using %ldK of video memory at %#lx\n",
-		sgivwfb_mem_size >> 10, sgivwfb_mem_phys);
-	return 0;
-
-fail_register_framebuffer:
-	fb_dealloc_cmap(&info->cmap);
-fail_color_map:
-	iounmap((char *) info->screen_base);
-fail_ioremap_fbmem:
-	iounmap(par->regs);
-fail_ioremap_regs:
-	release_mem_region(DBE_REG_PHYS, DBE_REG_SIZE);
-	framebuffer_release(info);
-	return -ENXIO;
-}
-
-static int sgivwfb_remove(struct platform_device *dev)
-{
-	struct fb_info *info = platform_get_drvdata(dev);
-
-	if (info) {
-		struct sgivw_par *par = info->par;
-
-		unregister_framebuffer(info);
-		dbe_TurnOffDma(par);
-		iounmap(par->regs);
-		iounmap(info->screen_base);
-		release_mem_region(DBE_REG_PHYS, DBE_REG_SIZE);
-		fb_dealloc_cmap(&info->cmap);
-		framebuffer_release(info);
-	}
-	return 0;
-}
-
-static struct platform_driver sgivwfb_driver = {
-	.probe	= sgivwfb_probe,
-	.remove	= sgivwfb_remove,
-	.driver	= {
-		.name	= "sgivwfb",
-	},
-};
-
-static struct platform_device *sgivwfb_device;
-
-int __init sgivwfb_init(void)
-{
-	int ret;
-
-#ifndef MODULE
-	char *option = NULL;
-
-	if (fb_get_options("sgivwfb", &option))
-		return -ENODEV;
-	sgivwfb_setup(option);
-#endif
-	ret = platform_driver_register(&sgivwfb_driver);
-	if (!ret) {
-		sgivwfb_device = platform_device_alloc("sgivwfb", 0);
-		if (sgivwfb_device) {
-			ret = platform_device_add(sgivwfb_device);
-		} else
-			ret = -ENOMEM;
-		if (ret) {
-			platform_driver_unregister(&sgivwfb_driver);
-			platform_device_put(sgivwfb_device);
-		}
-	}
-	return ret;
-}
-
-module_init(sgivwfb_init);
-
-#ifdef MODULE
-MODULE_LICENSE("GPL");
-
-static void __exit sgivwfb_exit(void)
-{
-	platform_device_unregister(sgivwfb_device);
-	platform_driver_unregister(&sgivwfb_driver);
-}
-
-module_exit(sgivwfb_exit);
-
-#endif				/* MODULE */
diff --git a/include/video/sgivw.h b/include/video/sgivw.h
deleted file mode 100644
index f6aa569..0000000
--- a/include/video/sgivw.h
+++ /dev/null
@@ -1,681 +0,0 @@
-/*
- *  linux/drivers/video/sgivw.h -- SGI DBE frame buffer device header
- *
- *      Copyright (C) 1999 Silicon Graphics, Inc.
- *      Jeffrey Newquist, newquist@xxxxxxxxxxxx
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License. See the file COPYING in the main directory of this archive for
- *  more details.
- */
-
-#ifndef __SGIVWFB_H__
-#define __SGIVWFB_H__
-
-#define DBE_GETREG(reg, dest)		((dest) = DBE_REG_BASE->reg)
-#define DBE_SETREG(reg, src)		DBE_REG_BASE->reg = (src)
-#define DBE_IGETREG(reg, idx, dest)	((dest) = DBE_REG_BASE->reg[idx])
-#define DBE_ISETREG(reg, idx, src)	(DBE_REG_BASE->reg[idx] = (src))
-
-#define MASK(msb, lsb)          ( (((u32)1<<((msb)-(lsb)+1))-1) << (lsb) )
-#define GET(v, msb, lsb)        ( ((u32)(v) & MASK(msb,lsb)) >> (lsb) )
-#define SET(v, f, msb, lsb)     ( (v) = ((v)&~MASK(msb,lsb)) | (( (u32)(f)<<(lsb) ) & MASK(msb,lsb)) )
-
-#define GET_DBE_FIELD(reg, field, v)        GET((v), DBE_##reg##_##field##_MSB, DBE_##reg##_##field##_LSB)
-#define SET_DBE_FIELD(reg, field, v, f)     SET((v), (f), DBE_##reg##_##field##_MSB, DBE_##reg##_##field##_LSB)
-
-/* NOTE: All loads/stores must be 32 bits and uncached */
-
-#define DBE_REG_PHYS	0xd0000000
-#define DBE_REG_SIZE        0x01000000
-
-struct asregs {
-  volatile u32 ctrlstat;     /* 0x000000 general control */
-  volatile u32 dotclock;     /* 0x000004 dot clock PLL control */
-  volatile u32 i2c;          /* 0x000008 crt I2C control */
-  volatile u32 sysclk;       /* 0x00000c system clock PLL control */
-  volatile u32 i2cfp;        /* 0x000010 flat panel I2C control */
-  volatile u32 id;           /* 0x000014 device id/chip revision */
-  volatile u32 config;       /* 0x000018 power on configuration */
-  volatile u32 bist;         /* 0x00001c internal bist status */
-
-  char _pad0[ 0x010000 - 0x000020 ];
-
-  volatile u32 vt_xy;        /* 0x010000 current dot coords */
-  volatile u32 vt_xymax;     /* 0x010004 maximum dot coords */
-  volatile u32 vt_vsync;     /* 0x010008 vsync on/off */
-  volatile u32 vt_hsync;     /* 0x01000c hsync on/off */
-  volatile u32 vt_vblank;    /* 0x010010 vblank on/off */
-  volatile u32 vt_hblank;    /* 0x010014 hblank on/off */
-  volatile u32 vt_flags;     /* 0x010018 polarity of vt signals */
-  volatile u32 vt_f2rf_lock; /* 0x01001c f2rf & framelck y coord */
-  volatile u32 vt_intr01;    /* 0x010020 intr 0,1 y coords */
-  volatile u32 vt_intr23;    /* 0x010024 intr 2,3 y coords */
-  volatile u32 fp_hdrv;      /* 0x010028 flat panel hdrv on/off */
-  volatile u32 fp_vdrv;      /* 0x01002c flat panel vdrv on/off */
-  volatile u32 fp_de;        /* 0x010030 flat panel de on/off */
-  volatile u32 vt_hpixen;    /* 0x010034 intrnl horiz pixel on/off*/
-  volatile u32 vt_vpixen;    /* 0x010038 intrnl vert pixel on/off */
-  volatile u32 vt_hcmap;     /* 0x01003c cmap write (horiz) */
-  volatile u32 vt_vcmap;     /* 0x010040 cmap write (vert) */
-  volatile u32 did_start_xy; /* 0x010044 eol/f did/xy reset val */
-  volatile u32 crs_start_xy; /* 0x010048 eol/f crs/xy reset val */
-  volatile u32 vc_start_xy;  /* 0x01004c eol/f vc/xy reset val */
-
-  char _pad1[ 0x020000 - 0x010050 ];
-
-  volatile u32 ovr_width_tile; /* 0x020000 overlay plane ctrl 0 */
-  volatile u32 ovr_inhwctrl;   /* 0x020004 overlay plane ctrl 1 */
-  volatile u32 ovr_control;    /* 0x020008 overlay plane ctrl 1 */
-
-  char _pad2[ 0x030000 - 0x02000C ];
-
-  volatile u32 frm_size_tile;  /* 0x030000 normal plane ctrl 0 */
-  volatile u32 frm_size_pixel; /* 0x030004 normal plane ctrl 1 */
-  volatile u32 frm_inhwctrl;   /* 0x030008 normal plane ctrl 2 */
-  volatile u32 frm_control;	   /* 0x03000C normal plane ctrl 3 */
-
-  char _pad3[ 0x040000 - 0x030010 ];
-
-  volatile u32 did_inhwctrl;   /* 0x040000 DID control */
-  volatile u32 did_control;    /* 0x040004 DID shadow */
-
-  char _pad4[ 0x048000 - 0x040008 ];
-
-  volatile u32 mode_regs[32];  /* 0x048000 - 0x04807c WID table */
-
-  char _pad5[ 0x050000 - 0x048080 ];
-
-  volatile u32 cmap[6144];     /* 0x050000 - 0x055ffc color map */
-
-  char _pad6[ 0x058000 - 0x056000 ];
-
-  volatile u32 cm_fifo;        /* 0x058000 color map fifo status */
-
-  char _pad7[ 0x060000 - 0x058004 ];
-
-  volatile u32 gmap[256];      /* 0x060000 - 0x0603fc gamma map */
-
-  char _pad8[ 0x068000 - 0x060400 ];
-
-  volatile u32 gmap10[1024];   /* 0x068000 - 0x068ffc gamma map */
-
-  char _pad9[ 0x070000 - 0x069000 ];
-
-  volatile u32 crs_pos;        /* 0x070000 cusror control 0 */
-  volatile u32 crs_ctl;        /* 0x070004 cusror control 1 */
-  volatile u32 crs_cmap[3];    /* 0x070008 - 0x070010 crs cmap */
-
-  char _pad10[ 0x078000 - 0x070014 ];
-
-  volatile u32 crs_glyph[64];  /* 0x078000 - 0x0780fc crs glyph */
-
-  char _pad11[ 0x080000 - 0x078100 ];
-
-  volatile u32 vc_0;           /* 0x080000 video capture crtl 0 */
-  volatile u32 vc_1;           /* 0x080004 video capture crtl 1 */
-  volatile u32 vc_2;           /* 0x080008 video capture crtl 2 */
-  volatile u32 vc_3;           /* 0x08000c video capture crtl 3 */
-  volatile u32 vc_4;           /* 0x080010 video capture crtl 3 */
-  volatile u32 vc_5;           /* 0x080014 video capture crtl 3 */
-  volatile u32 vc_6;           /* 0x080018 video capture crtl 3 */
-  volatile u32 vc_7;           /* 0x08001c video capture crtl 3 */
-  volatile u32 vc_8;           /* 0x08000c video capture crtl 3 */
-};
-
-/* Bit mask information */
-
-#define DBE_CTRLSTAT_CHIPID_MSB     3
-#define DBE_CTRLSTAT_CHIPID_LSB     0
-#define DBE_CTRLSTAT_SENSE_N_MSB    4
-#define DBE_CTRLSTAT_SENSE_N_LSB    4
-#define DBE_CTRLSTAT_PCLKSEL_MSB    29
-#define DBE_CTRLSTAT_PCLKSEL_LSB    28
-
-#define DBE_DOTCLK_M_MSB            7
-#define DBE_DOTCLK_M_LSB            0
-#define DBE_DOTCLK_N_MSB            13
-#define DBE_DOTCLK_N_LSB            8
-#define DBE_DOTCLK_P_MSB            15
-#define DBE_DOTCLK_P_LSB            14
-#define DBE_DOTCLK_RUN_MSB          20
-#define DBE_DOTCLK_RUN_LSB          20
-
-#define DBE_VT_XY_VT_FREEZE_MSB     31
-#define DBE_VT_XY_VT_FREEZE_LSB     31
-
-#define DBE_FP_VDRV_FP_VDRV_ON_MSB	23
-#define DBE_FP_VDRV_FP_VDRV_ON_LSB	12
-#define DBE_FP_VDRV_FP_VDRV_OFF_MSB	11
-#define DBE_FP_VDRV_FP_VDRV_OFF_LSB	0
-
-#define DBE_FP_HDRV_FP_HDRV_ON_MSB	23
-#define DBE_FP_HDRV_FP_HDRV_ON_LSB	12
-#define DBE_FP_HDRV_FP_HDRV_OFF_MSB	11
-#define DBE_FP_HDRV_FP_HDRV_OFF_LSB	0
-
-#define DBE_FP_DE_FP_DE_ON_MSB		23
-#define DBE_FP_DE_FP_DE_ON_LSB		12
-#define DBE_FP_DE_FP_DE_OFF_MSB		11
-#define DBE_FP_DE_FP_DE_OFF_LSB		0
-
-#define DBE_VT_VSYNC_VT_VSYNC_ON_MSB        23
-#define DBE_VT_VSYNC_VT_VSYNC_ON_LSB        12
-#define DBE_VT_VSYNC_VT_VSYNC_OFF_MSB       11
-#define DBE_VT_VSYNC_VT_VSYNC_OFF_LSB       0
-
-#define DBE_VT_HSYNC_VT_HSYNC_ON_MSB        23
-#define DBE_VT_HSYNC_VT_HSYNC_ON_LSB        12
-#define DBE_VT_HSYNC_VT_HSYNC_OFF_MSB       11
-#define DBE_VT_HSYNC_VT_HSYNC_OFF_LSB       0
-
-#define DBE_VT_VBLANK_VT_VBLANK_ON_MSB        23
-#define DBE_VT_VBLANK_VT_VBLANK_ON_LSB        12
-#define DBE_VT_VBLANK_VT_VBLANK_OFF_MSB       11
-#define DBE_VT_VBLANK_VT_VBLANK_OFF_LSB       0
-
-#define DBE_VT_HBLANK_VT_HBLANK_ON_MSB        23
-#define DBE_VT_HBLANK_VT_HBLANK_ON_LSB        12
-#define DBE_VT_HBLANK_VT_HBLANK_OFF_MSB       11
-#define DBE_VT_HBLANK_VT_HBLANK_OFF_LSB       0
-
-#define DBE_VT_FLAGS_VDRV_INVERT_MSB		0
-#define DBE_VT_FLAGS_VDRV_INVERT_LSB		0
-#define DBE_VT_FLAGS_HDRV_INVERT_MSB		2
-#define DBE_VT_FLAGS_HDRV_INVERT_LSB		2
-
-#define DBE_VT_VCMAP_VT_VCMAP_ON_MSB        23
-#define DBE_VT_VCMAP_VT_VCMAP_ON_LSB        12
-#define DBE_VT_VCMAP_VT_VCMAP_OFF_MSB       11
-#define DBE_VT_VCMAP_VT_VCMAP_OFF_LSB       0
-
-#define DBE_VT_HCMAP_VT_HCMAP_ON_MSB        23
-#define DBE_VT_HCMAP_VT_HCMAP_ON_LSB        12
-#define DBE_VT_HCMAP_VT_HCMAP_OFF_MSB       11
-#define DBE_VT_HCMAP_VT_HCMAP_OFF_LSB       0
-
-#define DBE_VT_XYMAX_VT_MAXX_MSB    11
-#define DBE_VT_XYMAX_VT_MAXX_LSB    0
-#define DBE_VT_XYMAX_VT_MAXY_MSB    23
-#define DBE_VT_XYMAX_VT_MAXY_LSB    12
-
-#define DBE_VT_HPIXEN_VT_HPIXEN_ON_MSB      23
-#define DBE_VT_HPIXEN_VT_HPIXEN_ON_LSB      12
-#define DBE_VT_HPIXEN_VT_HPIXEN_OFF_MSB     11
-#define DBE_VT_HPIXEN_VT_HPIXEN_OFF_LSB     0
-
-#define DBE_VT_VPIXEN_VT_VPIXEN_ON_MSB      23
-#define DBE_VT_VPIXEN_VT_VPIXEN_ON_LSB      12
-#define DBE_VT_VPIXEN_VT_VPIXEN_OFF_MSB     11
-#define DBE_VT_VPIXEN_VT_VPIXEN_OFF_LSB     0
-
-#define DBE_OVR_CONTROL_OVR_DMA_ENABLE_MSB  0
-#define DBE_OVR_CONTROL_OVR_DMA_ENABLE_LSB  0
-
-#define DBE_OVR_INHWCTRL_OVR_DMA_ENABLE_MSB 0
-#define DBE_OVR_INHWCTRL_OVR_DMA_ENABLE_LSB 0
-
-#define DBE_OVR_WIDTH_TILE_OVR_FIFO_RESET_MSB       13
-#define DBE_OVR_WIDTH_TILE_OVR_FIFO_RESET_LSB       13
-
-#define DBE_FRM_CONTROL_FRM_DMA_ENABLE_MSB  0
-#define DBE_FRM_CONTROL_FRM_DMA_ENABLE_LSB  0
-#define DBE_FRM_CONTROL_FRM_TILE_PTR_MSB    31
-#define DBE_FRM_CONTROL_FRM_TILE_PTR_LSB    9
-#define DBE_FRM_CONTROL_FRM_LINEAR_MSB      1
-#define DBE_FRM_CONTROL_FRM_LINEAR_LSB      1
-
-#define DBE_FRM_INHWCTRL_FRM_DMA_ENABLE_MSB 0
-#define DBE_FRM_INHWCTRL_FRM_DMA_ENABLE_LSB 0
-
-#define DBE_FRM_SIZE_TILE_FRM_WIDTH_TILE_MSB        12
-#define DBE_FRM_SIZE_TILE_FRM_WIDTH_TILE_LSB        5
-#define DBE_FRM_SIZE_TILE_FRM_RHS_MSB       4
-#define DBE_FRM_SIZE_TILE_FRM_RHS_LSB       0
-#define DBE_FRM_SIZE_TILE_FRM_DEPTH_MSB     14
-#define DBE_FRM_SIZE_TILE_FRM_DEPTH_LSB     13
-#define DBE_FRM_SIZE_TILE_FRM_FIFO_RESET_MSB        15
-#define DBE_FRM_SIZE_TILE_FRM_FIFO_RESET_LSB        15
-
-#define DBE_FRM_SIZE_PIXEL_FB_HEIGHT_PIX_MSB        31
-#define DBE_FRM_SIZE_PIXEL_FB_HEIGHT_PIX_LSB        16
-
-#define DBE_DID_CONTROL_DID_DMA_ENABLE_MSB  0
-#define DBE_DID_CONTROL_DID_DMA_ENABLE_LSB  0
-#define DBE_DID_INHWCTRL_DID_DMA_ENABLE_MSB 0
-#define DBE_DID_INHWCTRL_DID_DMA_ENABLE_LSB 0
-
-#define DBE_DID_START_XY_DID_STARTY_MSB     23
-#define DBE_DID_START_XY_DID_STARTY_LSB     12
-#define DBE_DID_START_XY_DID_STARTX_MSB     11
-#define DBE_DID_START_XY_DID_STARTX_LSB     0
-
-#define DBE_CRS_START_XY_CRS_STARTY_MSB     23
-#define DBE_CRS_START_XY_CRS_STARTY_LSB     12
-#define DBE_CRS_START_XY_CRS_STARTX_MSB     11
-#define DBE_CRS_START_XY_CRS_STARTX_LSB     0
-
-#define DBE_WID_TYP_MSB     4
-#define DBE_WID_TYP_LSB     2
-#define DBE_WID_BUF_MSB     1
-#define DBE_WID_BUF_LSB     0
-
-#define DBE_VC_START_XY_VC_STARTY_MSB       23
-#define DBE_VC_START_XY_VC_STARTY_LSB       12
-#define DBE_VC_START_XY_VC_STARTX_MSB       11
-#define DBE_VC_START_XY_VC_STARTX_LSB       0
-
-/* Constants */
-
-#define DBE_FRM_DEPTH_8     0
-#define DBE_FRM_DEPTH_16    1
-#define DBE_FRM_DEPTH_32    2
-
-#define DBE_CMODE_I8        0
-#define DBE_CMODE_I12       1
-#define DBE_CMODE_RG3B2     2
-#define DBE_CMODE_RGB4      3
-#define DBE_CMODE_ARGB5     4
-#define DBE_CMODE_RGB8      5
-#define DBE_CMODE_RGBA5     6
-#define DBE_CMODE_RGB10     7
-
-#define DBE_BMODE_BOTH      3
-
-#define DBE_CRS_MAGIC       54
-
-#define DBE_CLOCK_REF_KHZ	27000
-
-/* Config Register (DBE Only) Definitions */
-
-#define DBE_CONFIG_VDAC_ENABLE       0x00000001
-#define DBE_CONFIG_VDAC_GSYNC        0x00000002
-#define DBE_CONFIG_VDAC_PBLANK       0x00000004
-#define DBE_CONFIG_FPENABLE          0x00000008
-#define DBE_CONFIG_LENDIAN           0x00000020
-#define DBE_CONFIG_TILEHIST          0x00000040
-#define DBE_CONFIG_EXT_ADDR          0x00000080
-
-#define DBE_CONFIG_FBDEV        ( DBE_CONFIG_VDAC_ENABLE | \
-                                      DBE_CONFIG_VDAC_GSYNC  | \
-                                      DBE_CONFIG_VDAC_PBLANK | \
-                                      DBE_CONFIG_LENDIAN     | \
-                                      DBE_CONFIG_EXT_ADDR )
-
-/*
- * Available Video Timings and Corresponding Indices
- */
-
-typedef enum {
-  DBE_VT_640_480_60,
-
-  DBE_VT_800_600_60,
-  DBE_VT_800_600_75,
-  DBE_VT_800_600_120,
-
-  DBE_VT_1024_768_50,
-  DBE_VT_1024_768_60,
-  DBE_VT_1024_768_75,
-  DBE_VT_1024_768_85,
-  DBE_VT_1024_768_120,
-
-  DBE_VT_1280_1024_50,
-  DBE_VT_1280_1024_60,
-  DBE_VT_1280_1024_75,
-  DBE_VT_1280_1024_85,
-
-  DBE_VT_1600_1024_53,
-  DBE_VT_1600_1024_60,
-
-  DBE_VT_1600_1200_50,
-  DBE_VT_1600_1200_60,
-  DBE_VT_1600_1200_75,
-
-  DBE_VT_1920_1080_50,
-  DBE_VT_1920_1080_60,
-  DBE_VT_1920_1080_72,
-
-  DBE_VT_1920_1200_50,
-  DBE_VT_1920_1200_60,
-  DBE_VT_1920_1200_66,
-
-  DBE_VT_UNKNOWN
-} dbe_timing_t;
-
-
-
-/*
- * Crime Video Timing Data Structure
- */
-
-struct dbe_timing_info
-{
-  dbe_timing_t type;
-  int flags;
-  short width;		    /* Monitor resolution		*/
-  short height;
-  int fields_sec;	    /* fields/sec  (Hz -3 dec. places */
-  int cfreq;		    /* pixel clock frequency (MHz -3 dec. places) */
-  short htotal;		    /* Horizontal total pixels	*/
-  short hblank_start;	    /* Horizontal blank start	*/
-  short hblank_end;	    /* Horizontal blank end		*/
-  short hsync_start;	    /* Horizontal sync start	*/
-  short hsync_end;	    /* Horizontal sync end		*/
-  short vtotal;		    /* Vertical total lines		*/
-  short vblank_start;	    /* Vertical blank start		*/
-  short vblank_end;	    /* Vertical blank end		*/
-  short vsync_start;	    /* Vertical sync start		*/
-  short vsync_end;	    /* Vertical sync end		*/
-  short pll_m;		    /* PLL M parameter		*/
-  short pll_n;		    /* PLL P parameter		*/
-  short pll_p;		    /* PLL N parameter		*/
-};
-
-/* Defines for dbe_vof_info_t flags */
-
-#define DBE_VOF_UNKNOWNMON    1
-#define DBE_VOF_STEREO        2
-#define DBE_VOF_DO_GENSYNC    4          /* enable incoming sync */
-#define DBE_VOF_SYNC_ON_GREEN 8          /* sync on green */
-#define DBE_VOF_FLATPANEL     0x1000     /* FLATPANEL Timing */
-#define DBE_VOF_MAGICKEY      0x2000     /* Backdoor key */
-
-/*
- * DBE Timing Tables
- */
-
-#ifdef INCLUDE_TIMING_TABLE_DATA
-struct dbe_timing_info dbeVTimings[] = {
-  {
-    DBE_VT_640_480_60,
-    /*	flags,	width,			height,		fields_sec,		cfreq */
-    0,	        640,			480,		59940,			25175,
-    /*	htotal,	hblank_start,	hblank_end,	hsync_start,	hsync_end */
-    800,	640,		        800,		656,		752,
-    /*	vtotal,	vblank_start,	vblank_end,	vsync_start,	vsync_end */
-    525,	480,		        525,		490,		    492,
-    /*	pll_m,	pll_n,			pll_p */
-    15,	    2,				3
-  },
-
-  {
-    DBE_VT_800_600_60,
-    /*	flags,	width,			height,		fields_sec,		cfreq */
-    0,	    800,			600,		60317,			40000,
-    /*	htotal,	hblank_start,	hblank_end,	hsync_start,	hsync_end */
-    1056,	800,		    1056,		840,		    968,
-    /*	vtotal,	vblank_start,	vblank_end,	vsync_start,	vsync_end */
-    628,	600,		    628,		601,		    605,
-    /*	pll_m,	pll_n,			pll_p */
-    3,	    1,				1
-  },
-
-  {
-    DBE_VT_800_600_75,
-    /*	flags,	width,		    height,		fields_sec,	    cfreq */
-    0,	    800,		    600,		75000,		    49500,
-    /*	htotal,	hblank_start,	hblank_end,	hsync_start,	hsync_end */
-    1056,	800,		    1056,		816,		    896,
-    /*	vtotal,	vblank_start,	vblank_end,	vsync_start,	vsync_end */
-    625,	600,		    625,		601,		    604,
-    /*	pll_m,	pll_n,		    pll_p */
-    11,	    3,		        1
-  },
-
-  {
-    DBE_VT_800_600_120,
-    /*	flags,					width,		height,			fields_sec,	    cfreq */
-    DBE_VOF_STEREO,	    800,		600,			119800,		    82978,
-    /*	htotal,	hblank_start,	hblank_end,	hsync_start,	hsync_end */
-    1040,	800,		    1040,		856,		    976,
-    /*	vtotal,	vblank_start,	vblank_end,	vsync_start,	vsync_end */
-    666,	600,		    666,		637,		    643,
-    /*	pll_m,	pll_n,		    pll_p */
-    31,	    5,		        1
-  },
-
-  {
-    DBE_VT_1024_768_50,
-    /*	flags,	width,		    height,		fields_sec,	    cfreq */
-    0,	    1024,		    768,		50000,		    54163,
-    /*	htotal,	hblank_start,	hblank_end,	hsync_start,	hsync_end */
-    1344,	1024,		    1344,		1048,		    1184,
-    /*	vtotal,	vblank_start,	vblank_end,	vsync_start,	vsync_end */
-    806,	768,		    806,		771,		    777,
-    /*	pll_m,	pll_n,		    pll_p */
-    4,	    1,		        1
-  },
-
-  {
-    DBE_VT_1024_768_60,
-    /*	flags,	width,			height,		fields_sec,		cfreq */
-    0,	    1024,			768,		60004,			65000,
-    /*	htotal,	hblank_start,	hblank_end,	hsync_start,	hsync_end */
-    1344,	1024,		    1344,		1048,		    1184,
-    /*	vtotal,	vblank_start,	vblank_end,	vsync_start,	vsync_end */
-    806,	768,		    806,		771,		    777,
-    /*	pll_m,	pll_n,			pll_p */
-    12,	    5,				0
-  },
-
-  {
-    DBE_VT_1024_768_75,
-    /*	flags,	width,			height,		fields_sec,		cfreq */
-    0,	    1024,			768,		75029,			78750,
-    /*	htotal,	hblank_start,	hblank_end,	hsync_start,	hsync_end */
-    1312,	1024,		    1312,		1040,		    1136,
-    /*	vtotal,	vblank_start,	vblank_end,	vsync_start,	vsync_end */
-    800,	768,		    800,		769,		    772,
-    /*	pll_m,	pll_n,			pll_p */
-    29,	    5,				1
-  },
-
-  {
-    DBE_VT_1024_768_85,
-    /*	flags,	width,			height,		fields_sec,		cfreq */
-    0,	    1024,			768,		84997,			94500,
-    /*	htotal,	hblank_start,	hblank_end,	hsync_start,	hsync_end */
-    1376,	1024,		    1376,		1072,		    1168,
-    /*	vtotal,	vblank_start,	vblank_end,	vsync_start,	vsync_end */
-    808,	768,		    808,		769,		    772,
-    /*	pll_m,	pll_n,			pll_p */
-    7,	    2,				0
-  },
-
-  {
-    DBE_VT_1024_768_120,
-    /*	flags,					width,		height,			fields_sec,		cfreq */
-    DBE_VOF_STEREO,	    1024,		768,			119800,			133195,
-    /*	htotal,	hblank_start,	hblank_end,	hsync_start,	hsync_end */
-    1376,	1024,		    1376,		1072,		    1168,
-    /*	vtotal,	vblank_start,	vblank_end,	vsync_start,	vsync_end */
-    808,	768,		    808,		769,		    772,
-    /*	pll_m,	pll_n,			pll_p */
-    5,	    1,				0
-  },
-
-  {
-    DBE_VT_1280_1024_50,
-    /*	flags,	width,			height,		fields_sec,		cfreq */
-    0,	    1280,			1024,		50000,			89460,
-    /*	htotal,	hblank_start,	hblank_end,	hsync_start,	hsync_end */
-    1680,	1280,		    1680,		1360,		    1480,
-    /*	vtotal,	vblank_start,	vblank_end,	vsync_start,	vsync_end */
-    1065,	1024,		    1065,		1027,		    1030,
-    /*	pll_m,	pll_n,			pll_p */
-    10,	    3,				0
-  },
-
-  {
-    DBE_VT_1280_1024_60,
-    /*	flags,	width,			height,		fields_sec,		cfreq */
-    0,	    1280,			1024,		60020,			108000,
-    /*	htotal,	hblank_start,	hblank_end,	hsync_start,	hsync_end */
-    1688,	1280,		    1688,		1328,		    1440,
-    /*	vtotal,	vblank_start,	vblank_end,	vsync_start,	vsync_end */
-    1066,	1024,		    1066,		1025,		    1028,
-    /*	pll_m,	pll_n,			pll_p */
-    4,	    1,			    0
-  },
-
-  {
-    DBE_VT_1280_1024_75,
-    /*	flags,	width,			height,		fields_sec,		cfreq */
-    0,	    1280,			1024,		75025,			135000,
-    /*	htotal,	hblank_start,	hblank_end,	hsync_start,	hsync_end */
-    1688,	1280,		    1688,		1296,		    1440,
-    /*	vtotal,	vblank_start,	vblank_end,	vsync_start,	vsync_end */
-    1066,	1024,		    1066,		1025,		    1028,
-    /*	pll_m,	pll_n,			pll_p */
-    5,	    1,				0
-  },
-
-  {
-    DBE_VT_1280_1024_85,
-    /*	flags,	width,		    height,		fields_sec,	    cfreq */
-    0,	    1280,		    1024,		85024,		    157500,
-    /*	htotal,	hblank_start,	hblank_end,	hsync_start,	hsync_end */
-    1728,	1280,		    1728,		1344,		    1504,
-    /*	vtotal,	vblank_start,	vblank_end,	vsync_start,	vsync_end */
-    1072,	1024,		    1072,		1025,		    1028,
-    /*	pll_m,	pll_n,		    pll_p */
-    29,	    5,		        0
-  },
-
-  {
-    DBE_VT_1600_1024_53,
-    /* flags,	width,			height,		fields_sec,     cfreq */
-    DBE_VOF_FLATPANEL | DBE_VOF_MAGICKEY,
-    1600,			1024,		53000,			107447,
-    /* htotal, hblank_start,   hblank_end,     hsync_start,    hsync_end */
-    1900,   1600,           1900,           1630,           1730,
-    /* vtotal, vblank_start,   vblank_end,     vsync_start,    vsync_end */
-    1067,   1024,           1067,           1027,           1030,
-    /* pll_m,  pll_n,          pll_p */
-    4,      1,              0
-  },
-
-  {
-    DBE_VT_1600_1024_60,
-    /* flags,					width,          height,			fields_sec,     cfreq */
-    DBE_VOF_FLATPANEL,   1600,           1024,			60000,          106913,
-    /* htotal, hblank_start,   hblank_end,     hsync_start,    hsync_end */
-    1670,   1600,           1670,           1630,           1650,
-    /* vtotal, vblank_start,   vblank_end,     vsync_start,    vsync_end */
-    1067,   1024,           1067,           1027,           1030,
-    /* pll_m,  pll_n,          pll_p */
-    4,      1,              0
-  },
-
-  {
-    DBE_VT_1600_1200_50,
-    /* flags,  width,          height,         fields_sec,     cfreq */
-    0,      1600,           1200,           50000,          130500,
-    /* htotal, hblank_start,   hblank_end,     hsync_start,    hsync_end */
-    2088,   1600,           2088,           1644,           1764,
-    /* vtotal, vblank_start,   vblank_end,     vsync_start,    vsync_end */
-    1250,   1200,           1250,           1205,           1211,
-    /* pll_m,  pll_n,          pll_p */
-    24,     5,              0
-  },
-
-  {
-    DBE_VT_1600_1200_60,
-    /* flags,  width,          height,         fields_sec,     cfreq */
-    0,      1600,           1200,           59940,          162000,
-    /* htotal, hblank_start,   hblank_end,     hsync_start,    hsync_end */
-    2160,   1600,           2160,           1644,           1856,
-    /* vtotal, vblank_start,   vblank_end,     vsync_start,    vsync_end */
-    1250,   1200,           1250,           1201,           1204,
-    /* pll_m,  pll_n,          pll_p */
-    6,		1,              0
-  },
-
-  {
-    DBE_VT_1600_1200_75,
-    /* flags,  width,          height,         fields_sec,     cfreq */
-    0,      1600,           1200,           75000,          202500,
-    /* htotal, hblank_start,   hblank_end,     hsync_start,    hsync_end */
-    2160,   1600,           2160,           1644,           1856,
-    /* vtotal, vblank_start,   vblank_end,     vsync_start,    vsync_end */
-    1250,   1200,           1250,           1201,           1204,
-    /* pll_m,  pll_n,          pll_p */
-    15,		2,              0
-  },
-
-  {
-    DBE_VT_1920_1080_50,
-    /* flags,  width,          height,         fields_sec,     cfreq */
-    0,      1920,           1080,           50000,          133200,
-    /* htotal, hblank_start,   hblank_end,     hsync_start,    hsync_end */
-    2368,   1920,           2368,           1952,           2096,
-    /* vtotal, vblank_start,   vblank_end,     vsync_start,    vsync_end */
-    1125,   1080,           1125,           1083,           1086,
-    /* pll_m,  pll_n,          pll_p */
-    5,      1,              0
-  },
-
-  {
-    DBE_VT_1920_1080_60,
-    /* flags,  width,          height,         fields_sec,     cfreq */
-    0,      1920,           1080,           59940,          159840,
-    /* htotal, hblank_start,   hblank_end,     hsync_start,    hsync_end */
-    2368,   1920,           2368,           1952,           2096,
-    /* vtotal, vblank_start,   vblank_end,     vsync_start,    vsync_end */
-    1125,   1080,           1125,           1083,           1086,
-    /* pll_m,  pll_n,          pll_p */
-    6,      1,              0
-  },
-
-  {
-    DBE_VT_1920_1080_72,
-    /* flags,  width,          height,         fields_sec,     cfreq */
-    0,      1920,           1080,           72000,          216023,
-    /* htotal, hblank_start,   hblank_end,     hsync_start,    hsync_end */
-    2560,   1920,           2560,           1968,           2184,
-    /* vtotal, vblank_start,   vblank_end,     vsync_start,    vsync_end */
-    1172,   1080,           1172,           1083,           1086,
-    /* pll_m,  pll_n,          pll_p */
-    8,      1,              0
-  },
-
-  {
-    DBE_VT_1920_1200_50,
-    /* flags,  width,          height,         fields_sec,     cfreq */
-    0,      1920,           1200,           50000,          161500,
-    /* htotal, hblank_start,   hblank_end,     hsync_start,    hsync_end */
-    2584,   1920,           2584,           1984,           2240,
-    /* vtotal, vblank_start,   vblank_end,     vsync_start,    vsync_end */
-    1250,   1200,           1250,           1203,           1206,
-    /* pll_m,  pll_n,          pll_p */
-    6,      1,              0
-  },
-
-  {
-    DBE_VT_1920_1200_60,
-    /* flags,  width,          height,         fields_sec,     cfreq */
-    0,      1920,           1200,           59940,          193800,
-    /* htotal, hblank_start,   hblank_end,     hsync_start,    hsync_end */
-    2584,   1920,           2584,           1984,           2240,
-    /* vtotal, vblank_start,   vblank_end,     vsync_start,    vsync_end */
-    1250,   1200,           1250,           1203,           1206,
-    /* pll_m,  pll_n,          pll_p */
-    29,     4,              0
-  },
-
-  {
-    DBE_VT_1920_1200_66,
-    /* flags,  width,          height,         fields_sec,     cfreq */
-    0,      1920,           1200,           66000,          213180,
-    /* htotal, hblank_start,   hblank_end,     hsync_start,    hsync_end */
-    2584,   1920,           2584,           1984,           2240,
-    /* vtotal, vblank_start,   vblank_end,     vsync_start,    vsync_end */
-    1250,   1200,           1250,           1203,           1206,
-    /* pll_m,  pll_n,          pll_p */
-    8,      1,              0
-  }
-};
-
-#endif // INCLUDE_TIMING_TABLE_DATA
-
-#endif // ! __SGIVWFB_H__
diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig
index 1a96402..48568fd 100644
--- a/sound/oss/Kconfig
+++ b/sound/oss/Kconfig
@@ -13,15 +13,6 @@ config SOUND_BCM_CS4297A
 	  note that CONFIG_KGDB should not be enabled at the same
 	  time, since it also attempts to use this UART port.
 
-config SOUND_VWSND
-	tristate "SGI Visual Workstation Sound"
-	depends on X86_VISWS
-	help
-	  Say Y or M if you have an SGI Visual Workstation and you want to be
-	  able to use its on-board audio.  Read
-	  <file:Documentation/sound/oss/vwsnd> for more info on this driver's
-	  capabilities.
-
 config SOUND_MSNDCLAS
 	tristate "Support for Turtle Beach MultiSound Classic, Tahiti, Monterey"
 	depends on (m || !STANDALONE) && ISA
diff --git a/sound/oss/Makefile b/sound/oss/Makefile
index 77f21b6..9bdbbde 100644
--- a/sound/oss/Makefile
+++ b/sound/oss/Makefile
@@ -24,7 +24,6 @@ obj-$(CONFIG_SOUND_VIDC)	+= vidc_mod.o
 obj-$(CONFIG_SOUND_WAVEARTIST)	+= waveartist.o
 obj-$(CONFIG_SOUND_MSNDCLAS)	+= msnd.o msnd_classic.o
 obj-$(CONFIG_SOUND_MSNDPIN)	+= msnd.o msnd_pinnacle.o
-obj-$(CONFIG_SOUND_VWSND)	+= vwsnd.o
 obj-$(CONFIG_SOUND_BCM_CS4297A)	+= swarm_cs4297a.o
 
 obj-$(CONFIG_DMASOUND)		+= dmasound/
diff --git a/sound/oss/vwsnd.c b/sound/oss/vwsnd.c
deleted file mode 100644
index a077e9c..0000000
--- a/sound/oss/vwsnd.c
+++ /dev/null
@@ -1,3506 +0,0 @@
-/*
- * Sound driver for Silicon Graphics 320 and 540 Visual Workstations'
- * onboard audio.  See notes in Documentation/sound/oss/vwsnd .
- *
- * Copyright 1999 Silicon Graphics, Inc.  All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#undef VWSND_DEBUG			/* define for debugging */
-
-/*
- * XXX to do -
- *
- *	External sync.
- *	Rename swbuf, hwbuf, u&i, hwptr&swptr to something rational.
- *	Bug - if select() called before read(), pcm_setup() not called.
- *	Bug - output doesn't stop soon enough if process killed.
- */
-
-/*
- * Things to test -
- *
- *	Will readv/writev work?  Write a test.
- *
- *	insmod/rmmod 100 million times.
- *
- *	Run I/O until int ptrs wrap around (roughly 6.2 hours @ DAT
- *	rate).
- *
- *	Concurrent threads banging on mixer simultaneously, both UP
- *	and SMP kernels.  Especially, watch for thread A changing
- *	OUTSRC while thread B changes gain -- both write to the same
- *	ad1843 register.
- *
- *	What happens if a client opens /dev/audio then forks?
- *	Do two procs have /dev/audio open?  Test.
- *
- *	Pump audio through the CD, MIC and line inputs and verify that
- *	they mix/mute into the output.
- *
- *	Apps:
- *		amp
- *		mpg123
- *		x11amp
- *		mxv
- *		kmedia
- *		esound
- *		need more input apps
- *
- *	Run tests while bombarding with signals.  setitimer(2) will do it...  */
-
-/*
- * This driver is organized in nine sections.
- * The nine sections are:
- *
- *	debug stuff
- * 	low level lithium access
- *	high level lithium access
- *	AD1843 access
- *	PCM I/O
- *	audio driver
- *	mixer driver
- *	probe/attach/unload
- *	initialization and loadable kernel module interface
- *
- * That is roughly the order of increasing abstraction, so forward
- * dependencies are minimal.
- */
-
-/*
- * Locking Notes
- *
- *	INC_USE_COUNT and DEC_USE_COUNT keep track of the number of
- *	open descriptors to this driver. They store it in vwsnd_use_count.
- * 	The global device list, vwsnd_dev_list,	is immutable when the IN_USE
- *	is true.
- *
- *	devc->open_lock is a semaphore that is used to enforce the
- *	single reader/single writer rule for /dev/audio.  The rule is
- *	that each device may have at most one reader and one writer.
- *	Open will block until the previous client has closed the
- *	device, unless O_NONBLOCK is specified.
- *
- *	The semaphore devc->io_mutex serializes PCM I/O syscalls.  This
- *	is unnecessary in Linux 2.2, because the kernel lock
- *	serializes read, write, and ioctl globally, but it's there,
- *	ready for the brave, new post-kernel-lock world.
- *
- *	Locking between interrupt and baselevel is handled by the
- *	"lock" spinlock in vwsnd_port (one lock each for read and
- *	write).  Each half holds the lock just long enough to see what
- *	area it owns and update its pointers.  See pcm_output() and
- *	pcm_input() for most of the gory stuff.
- *
- *	devc->mix_mutex serializes all mixer ioctls.  This is also
- *	redundant because of the kernel lock.
- *
- *	The lowest level lock is lith->lithium_lock.  It is a
- *	spinlock which is held during the two-register tango of
- *	reading/writing an AD1843 register.  See
- *	li_{read,write}_ad1843_reg().
- */
-
-/*
- * Sample Format Notes
- *
- *	Lithium's DMA engine has two formats: 16-bit 2's complement
- *	and 8-bit unsigned .  16-bit transfers the data unmodified, 2
- *	bytes per sample.  8-bit unsigned transfers 1 byte per sample
- *	and XORs each byte with 0x80.  Lithium can input or output
- *	either mono or stereo in either format.
- *
- *	The AD1843 has four formats: 16-bit 2's complement, 8-bit
- *	unsigned, 8-bit mu-Law and 8-bit A-Law.
- *
- *	This driver supports five formats: AFMT_S8, AFMT_U8,
- *	AFMT_MU_LAW, AFMT_A_LAW, and AFMT_S16_LE.
- *
- *	For AFMT_U8 output, we keep the AD1843 in 16-bit mode, and
- *	rely on Lithium's XOR to translate between U8 and S8.
- *
- *	For AFMT_S8, AFMT_MU_LAW and AFMT_A_LAW output, we have to XOR
- *	the 0x80 bit in software to compensate for Lithium's XOR.
- *	This happens in pcm_copy_{in,out}().
- *
- * Changes:
- * 11-10-2000	Bartlomiej Zolnierkiewicz <bkz@xxxxxxxxxxxxx>
- *		Added some __init/__exit
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include <linux/spinlock.h>
-#include <linux/wait.h>
-#include <linux/interrupt.h>
-#include <linux/mutex.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-
-#include <asm/visws/cobalt.h>
-
-#include "sound_config.h"
-
-static DEFINE_MUTEX(vwsnd_mutex);
-
-/*****************************************************************************/
-/* debug stuff */
-
-#ifdef VWSND_DEBUG
-
-static int shut_up = 1;
-
-/*
- * dbgassert - called when an assertion fails.
- */
-
-static void dbgassert(const char *fcn, int line, const char *expr)
-{
-	if (in_interrupt())
-		panic("ASSERTION FAILED IN INTERRUPT, %s:%s:%d %s\n",
-		      __FILE__, fcn, line, expr);
-	else {
-		int x;
-		printk(KERN_ERR "ASSERTION FAILED, %s:%s:%d %s\n",
-		       __FILE__, fcn, line, expr);
-		x = * (volatile int *) 0; /* force proc to exit */
-	}
-}
-
-/*
- * Bunch of useful debug macros:
- *
- *	ASSERT	- print unless e nonzero (panic if in interrupt)
- *	DBGDO	- include arbitrary code if debugging
- *	DBGX	- debug print raw (w/o function name)
- *	DBGP	- debug print w/ function name
- *	DBGE	- debug print function entry
- *	DBGC	- debug print function call
- *	DBGR	- debug print function return
- *	DBGXV	- debug print raw when verbose
- *	DBGPV	- debug print when verbose
- *	DBGEV	- debug print function entry when verbose
- *	DBGRV	- debug print function return when verbose
- */
-
-#define ASSERT(e)      ((e) ? (void) 0 : dbgassert(__func__, __LINE__, #e))
-#define DBGDO(x)            x
-#define DBGX(fmt, args...)  (in_interrupt() ? 0 : printk(KERN_ERR fmt, ##args))
-#define DBGP(fmt, args...)  (DBGX("%s: " fmt, __func__ , ##args))
-#define DBGE(fmt, args...)  (DBGX("%s" fmt, __func__ , ##args))
-#define DBGC(rtn)           (DBGP("calling %s\n", rtn))
-#define DBGR()              (DBGP("returning\n"))
-#define DBGXV(fmt, args...) (shut_up ? 0 : DBGX(fmt, ##args))
-#define DBGPV(fmt, args...) (shut_up ? 0 : DBGP(fmt, ##args))
-#define DBGEV(fmt, args...) (shut_up ? 0 : DBGE(fmt, ##args))
-#define DBGCV(rtn)          (shut_up ? 0 : DBGC(rtn))
-#define DBGRV()             (shut_up ? 0 : DBGR())
-
-#else /* !VWSND_DEBUG */
-
-#define ASSERT(e)           ((void) 0)
-#define DBGDO(x)            /* don't */
-#define DBGX(fmt, args...)  ((void) 0)
-#define DBGP(fmt, args...)  ((void) 0)
-#define DBGE(fmt, args...)  ((void) 0)
-#define DBGC(rtn)           ((void) 0)
-#define DBGR()              ((void) 0)
-#define DBGPV(fmt, args...) ((void) 0)
-#define DBGXV(fmt, args...) ((void) 0)
-#define DBGEV(fmt, args...) ((void) 0)
-#define DBGCV(rtn)          ((void) 0)
-#define DBGRV()             ((void) 0)
-
-#endif /* !VWSND_DEBUG */
-
-/*****************************************************************************/
-/* low level lithium access */
-
-/*
- * We need to talk to Lithium registers on three pages.  Here are
- * the pages' offsets from the base address (0xFF001000).
- */
-
-enum {
-	LI_PAGE0_OFFSET = 0x01000 - 0x1000, /* FF001000 */
-	LI_PAGE1_OFFSET = 0x0F000 - 0x1000, /* FF00F000 */
-	LI_PAGE2_OFFSET = 0x10000 - 0x1000, /* FF010000 */
-};
-
-/* low-level lithium data */
-
-typedef struct lithium {
-	void *		page0;		/* virtual addresses */
-	void *		page1;
-	void *		page2;
-	spinlock_t	lock;		/* protects codec and UST/MSC access */
-} lithium_t;
-
-/*
- * li_destroy destroys the lithium_t structure and vm mappings.
- */
-
-static void li_destroy(lithium_t *lith)
-{
-	if (lith->page0) {
-		iounmap(lith->page0);
-		lith->page0 = NULL;
-	}
-	if (lith->page1) {
-		iounmap(lith->page1);
-		lith->page1 = NULL;
-	}
-	if (lith->page2) {
-		iounmap(lith->page2);
-		lith->page2 = NULL;
-	}
-}
-
-/*
- * li_create initializes the lithium_t structure and sets up vm mappings
- * to access the registers.
- * Returns 0 on success, -errno on failure.
- */
-
-static int __init li_create(lithium_t *lith, unsigned long baseaddr)
-{
-	spin_lock_init(&lith->lock);
-	lith->page0 = ioremap_nocache(baseaddr + LI_PAGE0_OFFSET, PAGE_SIZE);
-	lith->page1 = ioremap_nocache(baseaddr + LI_PAGE1_OFFSET, PAGE_SIZE);
-	lith->page2 = ioremap_nocache(baseaddr + LI_PAGE2_OFFSET, PAGE_SIZE);
-	if (!lith->page0 || !lith->page1 || !lith->page2) {
-		li_destroy(lith);
-		return -ENOMEM;
-	}
-	return 0;
-}
-
-/*
- * basic register accessors - read/write long/byte
- */
-
-static __inline__ unsigned long li_readl(lithium_t *lith, int off)
-{
-	return * (volatile unsigned long *) (lith->page0 + off);
-}
-
-static __inline__ unsigned char li_readb(lithium_t *lith, int off)
-{
-	return * (volatile unsigned char *) (lith->page0 + off);
-}
-
-static __inline__ void li_writel(lithium_t *lith, int off, unsigned long val)
-{
-	* (volatile unsigned long *) (lith->page0 + off) = val;
-}
-
-static __inline__ void li_writeb(lithium_t *lith, int off, unsigned char val)
-{
-	* (volatile unsigned char *) (lith->page0 + off) = val;
-}
-
-/*****************************************************************************/
-/* High Level Lithium Access */
-
-/*
- * Lithium DMA Notes
- *
- * Lithium has two dedicated DMA channels for audio.  They are known
- * as comm1 and comm2 (communication areas 1 and 2).  Comm1 is for
- * input, and comm2 is for output.  Each is controlled by three
- * registers: BASE (base address), CFG (config) and CCTL
- * (config/control).
- *
- * Each DMA channel points to a physically contiguous ring buffer in
- * main memory of up to 8 Kbytes.  (This driver always uses 8 Kb.)
- * There are three pointers into the ring buffer: read, write, and
- * trigger.  The pointers are 8 bits each.  Each pointer points to
- * 32-byte "chunks" of data.  The DMA engine moves 32 bytes at a time,
- * so there is no finer-granularity control.
- *
- * In comm1, the hardware updates the write ptr, and software updates
- * the read ptr.  In comm2, it's the opposite: hardware updates the
- * read ptr, and software updates the write ptr.  I designate the
- * hardware-updated ptr as the hwptr, and the software-updated ptr as
- * the swptr.
- *
- * The trigger ptr and trigger mask are used to trigger interrupts.
- * From the Lithium spec, section 5.6.8, revision of 12/15/1998:
- *
- *	Trigger Mask Value
- *
- *	A three bit wide field that represents a power of two mask
- *	that is used whenever the trigger pointer is compared to its
- *	respective read or write pointer.  A value of zero here
- *	implies a mask of 0xFF and a value of seven implies a mask
- *	0x01.  This value can be used to sub-divide the ring buffer
- *	into pie sections so that interrupts monitor the progress of
- *	hardware from section to section.
- *
- * My interpretation of that is, whenever the hw ptr is updated, it is
- * compared with the trigger ptr, and the result is masked by the
- * trigger mask.  (Actually, by the complement of the trigger mask.)
- * If the result is zero, an interrupt is triggered.  I.e., interrupt
- * if ((hwptr & ~mask) == (trptr & ~mask)).  The mask is formed from
- * the trigger register value as mask = (1 << (8 - tmreg)) - 1.
- *
- * In yet different words, setting tmreg to 0 causes an interrupt after
- * every 256 DMA chunks (8192 bytes) or once per traversal of the
- * ring buffer.  Setting it to 7 caues an interrupt every 2 DMA chunks
- * (64 bytes) or 128 times per traversal of the ring buffer.
- */
-
-/* Lithium register offsets and bit definitions */
-
-#define LI_HOST_CONTROLLER	0x000
-# define LI_HC_RESET		 0x00008000
-# define LI_HC_LINK_ENABLE	 0x00004000
-# define LI_HC_LINK_FAILURE	 0x00000004
-# define LI_HC_LINK_CODEC	 0x00000002
-# define LI_HC_LINK_READY	 0x00000001
-
-#define LI_INTR_STATUS		0x010
-#define LI_INTR_MASK		0x014
-# define LI_INTR_LINK_ERR	 0x00008000
-# define LI_INTR_COMM2_TRIG	 0x00000008
-# define LI_INTR_COMM2_UNDERFLOW 0x00000004
-# define LI_INTR_COMM1_TRIG	 0x00000002
-# define LI_INTR_COMM1_OVERFLOW  0x00000001
-
-#define LI_CODEC_COMMAND	0x018
-# define LI_CC_BUSY		 0x00008000
-# define LI_CC_DIR		 0x00000080
-#  define LI_CC_DIR_RD		  LI_CC_DIR
-#  define LI_CC_DIR_WR		(!LI_CC_DIR)
-# define LI_CC_ADDR_MASK	 0x0000007F
-
-#define LI_CODEC_DATA		0x01C
-
-#define LI_COMM1_BASE		0x100
-#define LI_COMM1_CTL		0x104
-# define LI_CCTL_RESET		 0x80000000
-# define LI_CCTL_SIZE		 0x70000000
-# define LI_CCTL_DMA_ENABLE	 0x08000000
-# define LI_CCTL_TMASK		 0x07000000 /* trigger mask */
-# define LI_CCTL_TPTR		 0x00FF0000 /* trigger pointer */
-# define LI_CCTL_RPTR		 0x0000FF00
-# define LI_CCTL_WPTR		 0x000000FF
-#define LI_COMM1_CFG		0x108
-# define LI_CCFG_LOCK		 0x00008000
-# define LI_CCFG_SLOT		 0x00000070
-# define LI_CCFG_DIRECTION	 0x00000008
-#  define LI_CCFG_DIR_IN	(!LI_CCFG_DIRECTION)
-#  define LI_CCFG_DIR_OUT	  LI_CCFG_DIRECTION
-# define LI_CCFG_MODE		 0x00000004
-#  define LI_CCFG_MODE_MONO	(!LI_CCFG_MODE)
-#  define LI_CCFG_MODE_STEREO	  LI_CCFG_MODE
-# define LI_CCFG_FORMAT		 0x00000003
-#  define LI_CCFG_FMT_8BIT	  0x00000000
-#  define LI_CCFG_FMT_16BIT	  0x00000001
-#define LI_COMM2_BASE		0x10C
-#define LI_COMM2_CTL		0x110
- /* bit definitions are the same as LI_COMM1_CTL */
-#define LI_COMM2_CFG		0x114
- /* bit definitions are the same as LI_COMM1_CFG */
-
-#define LI_UST_LOW		0x200	/* 64-bit Unadjusted System Time is */
-#define LI_UST_HIGH		0x204	/* microseconds since boot */
-
-#define LI_AUDIO1_UST		0x300	/* UST-MSC pairs */
-#define LI_AUDIO1_MSC		0x304	/* MSC (Media Stream Counter) */
-#define LI_AUDIO2_UST		0x308	/* counts samples actually */
-#define LI_AUDIO2_MSC		0x30C	/* processed as of time UST */
-
-/* 
- * Lithium's DMA engine operates on chunks of 32 bytes.  We call that
- * a DMACHUNK.
- */
-
-#define DMACHUNK_SHIFT 5
-#define DMACHUNK_SIZE (1 << DMACHUNK_SHIFT)
-#define BYTES_TO_CHUNKS(bytes) ((bytes) >> DMACHUNK_SHIFT)
-#define CHUNKS_TO_BYTES(chunks) ((chunks) << DMACHUNK_SHIFT)
-
-/*
- * Two convenient macros to shift bitfields into/out of position.
- *
- * Observe that (mask & -mask) is (1 << low_set_bit_of(mask)).
- * As long as mask is constant, we trust the compiler will change the
- * multiply and divide into shifts.
- */
-
-#define SHIFT_FIELD(val, mask) (((val) * ((mask) & -(mask))) & (mask))
-#define UNSHIFT_FIELD(val, mask) (((val) & (mask)) / ((mask) & -(mask)))
-
-/*
- * dma_chan_desc is invariant information about a Lithium
- * DMA channel.  There are two instances, li_comm1 and li_comm2.
- *
- * Note that the CCTL register fields are write ptr and read ptr, but what
- * we care about are which pointer is updated by software and which by
- * hardware.
- */
-
-typedef struct dma_chan_desc {
-	int basereg;
-	int cfgreg;
-	int ctlreg;
-	int hwptrreg;
-	int swptrreg;
-	int ustreg;
-	int mscreg;
-	unsigned long swptrmask;
-	int ad1843_slot;
-	int direction;			/* LI_CCTL_DIR_IN/OUT */
-} dma_chan_desc_t;
-
-static const dma_chan_desc_t li_comm1 = {
-	LI_COMM1_BASE,			/* base register offset */
-	LI_COMM1_CFG,			/* config register offset */
-	LI_COMM1_CTL,			/* control register offset */
-	LI_COMM1_CTL + 0,		/* hw ptr reg offset (write ptr) */
-	LI_COMM1_CTL + 1,		/* sw ptr reg offset (read ptr) */
-	LI_AUDIO1_UST,			/* ust reg offset */
-	LI_AUDIO1_MSC,			/* msc reg offset */
-	LI_CCTL_RPTR,			/* sw ptr bitmask in ctlval */
-	2,				/* ad1843 serial slot */
-	LI_CCFG_DIR_IN			/* direction */
-};
-
-static const dma_chan_desc_t li_comm2 = {
-	LI_COMM2_BASE,			/* base register offset */
-	LI_COMM2_CFG,			/* config register offset */
-	LI_COMM2_CTL,			/* control register offset */
-	LI_COMM2_CTL + 1,		/* hw ptr reg offset (read ptr) */
-	LI_COMM2_CTL + 0,		/* sw ptr reg offset (writr ptr) */
-	LI_AUDIO2_UST,			/* ust reg offset */
-	LI_AUDIO2_MSC,			/* msc reg offset */
-	LI_CCTL_WPTR,			/* sw ptr bitmask in ctlval */
-	2,				/* ad1843 serial slot */
-	LI_CCFG_DIR_OUT			/* direction */
-};
-
-/*
- * dma_chan is variable information about a Lithium DMA channel.
- *
- * The desc field points to invariant information.
- * The lith field points to a lithium_t which is passed
- * to li_read* and li_write* to access the registers.
- * The *val fields shadow the lithium registers' contents.
- */
-
-typedef struct dma_chan {
-	const dma_chan_desc_t *desc;
-	lithium_t      *lith;
-	unsigned long   baseval;
-	unsigned long	cfgval;
-	unsigned long	ctlval;
-} dma_chan_t;
-
-/*
- * ustmsc is a UST/MSC pair (Unadjusted System Time/Media Stream Counter).
- * UST is time in microseconds since the system booted, and MSC is a
- * counter that increments with every audio sample.
- */
-
-typedef struct ustmsc {
-	unsigned long long ust;
-	unsigned long msc;
-} ustmsc_t;
-
-/*
- * li_ad1843_wait waits until lithium says the AD1843 register
- * exchange is not busy.  Returns 0 on success, -EBUSY on timeout.
- *
- * Locking: must be called with lithium_lock held.
- */
-
-static int li_ad1843_wait(lithium_t *lith)
-{
-	unsigned long later = jiffies + 2;
-	while (li_readl(lith, LI_CODEC_COMMAND) & LI_CC_BUSY)
-		if (time_after_eq(jiffies, later))
-			return -EBUSY;
-	return 0;
-}
-
-/*
- * li_read_ad1843_reg returns the current contents of a 16 bit AD1843 register.
- *
- * Returns unsigned register value on success, -errno on failure.
- */
-
-static int li_read_ad1843_reg(lithium_t *lith, int reg)
-{
-	int val;
-
-	ASSERT(!in_interrupt());
-	spin_lock(&lith->lock);
-	{
-		val = li_ad1843_wait(lith);
-		if (val == 0) {
-			li_writel(lith, LI_CODEC_COMMAND, LI_CC_DIR_RD | reg);
-			val = li_ad1843_wait(lith);
-		}
-		if (val == 0)
-			val = li_readl(lith, LI_CODEC_DATA);
-	}
-	spin_unlock(&lith->lock);
-
-	DBGXV("li_read_ad1843_reg(lith=0x%p, reg=%d) returns 0x%04x\n",
-	      lith, reg, val);
-
-	return val;
-}
-
-/*
- * li_write_ad1843_reg writes the specified value to a 16 bit AD1843 register.
- */
-
-static void li_write_ad1843_reg(lithium_t *lith, int reg, int newval)
-{
-	spin_lock(&lith->lock);
-	{
-		if (li_ad1843_wait(lith) == 0) {
-			li_writel(lith, LI_CODEC_DATA, newval);
-			li_writel(lith, LI_CODEC_COMMAND, LI_CC_DIR_WR | reg);
-		}
-	}
-	spin_unlock(&lith->lock);
-}
-
-/*
- * li_setup_dma calculates all the register settings for DMA in a particular
- * mode.  It takes too many arguments.
- */
-
-static void li_setup_dma(dma_chan_t *chan,
-			 const dma_chan_desc_t *desc,
-			 lithium_t *lith,
-			 unsigned long buffer_paddr,
-			 int bufshift,
-			 int fragshift,
-			 int channels,
-			 int sampsize)
-{
-	unsigned long mode, format;
-	unsigned long size, tmask;
-
-	DBGEV("(chan=0x%p, desc=0x%p, lith=0x%p, buffer_paddr=0x%lx, "
-	     "bufshift=%d, fragshift=%d, channels=%d, sampsize=%d)\n",
-	     chan, desc, lith, buffer_paddr,
-	     bufshift, fragshift, channels, sampsize);
-
-	/* Reset the channel first. */
-
-	li_writel(lith, desc->ctlreg, LI_CCTL_RESET);
-
-	ASSERT(channels == 1 || channels == 2);
-	if (channels == 2)
-		mode = LI_CCFG_MODE_STEREO;
-	else
-		mode = LI_CCFG_MODE_MONO;
-	ASSERT(sampsize == 1 || sampsize == 2);
-	if (sampsize == 2)
-		format = LI_CCFG_FMT_16BIT;
-	else
-		format = LI_CCFG_FMT_8BIT;
-	chan->desc = desc;
-	chan->lith = lith;
-
-	/*
-	 * Lithium DMA address register takes a 40-bit physical
-	 * address, right-shifted by 8 so it fits in 32 bits.  Bit 37
-	 * must be set -- it enables cache coherence.
-	 */
-
-	ASSERT(!(buffer_paddr & 0xFF));
-	chan->baseval = (buffer_paddr >> 8) | 1 << (37 - 8);
-
-	chan->cfgval = ((chan->cfgval & ~LI_CCFG_LOCK) |
-			SHIFT_FIELD(desc->ad1843_slot, LI_CCFG_SLOT) |
-			desc->direction |
-			mode |
-			format);
-
-	size = bufshift - 6;
-	tmask = 13 - fragshift;		/* See Lithium DMA Notes above. */
-	ASSERT(size >= 2 && size <= 7);
-	ASSERT(tmask >= 1 && tmask <= 7);
-	chan->ctlval = ((chan->ctlval & ~LI_CCTL_RESET) |
-			SHIFT_FIELD(size, LI_CCTL_SIZE) |
-			(chan->ctlval & ~LI_CCTL_DMA_ENABLE) |
-			SHIFT_FIELD(tmask, LI_CCTL_TMASK) |
-			SHIFT_FIELD(0, LI_CCTL_TPTR));
-
-	DBGPV("basereg 0x%x = 0x%lx\n", desc->basereg, chan->baseval);
-	DBGPV("cfgreg 0x%x = 0x%lx\n", desc->cfgreg, chan->cfgval);
-	DBGPV("ctlreg 0x%x = 0x%lx\n", desc->ctlreg, chan->ctlval);
-
-	li_writel(lith, desc->basereg, chan->baseval);
-	li_writel(lith, desc->cfgreg, chan->cfgval);
-	li_writel(lith, desc->ctlreg, chan->ctlval);
-
-	DBGRV();
-}
-
-static void li_shutdown_dma(dma_chan_t *chan)
-{
-	lithium_t *lith = chan->lith;
-	void * lith1 = lith->page1;
-
-	DBGEV("(chan=0x%p)\n", chan);
-	
-	chan->ctlval &= ~LI_CCTL_DMA_ENABLE;
-	DBGPV("ctlreg 0x%x = 0x%lx\n", chan->desc->ctlreg, chan->ctlval);
-	li_writel(lith, chan->desc->ctlreg, chan->ctlval);
-
-	/*
-	 * Offset 0x500 on Lithium page 1 is an undocumented,
-	 * unsupported register that holds the zero sample value.
-	 * Lithium is supposed to output zero samples when DMA is
-	 * inactive, and repeat the last sample when DMA underflows.
-	 * But it has a bug, where, after underflow occurs, the zero
-	 * sample is not reset.
-	 *
-	 * I expect this to break in a future rev of Lithium.
-	 */
-
-	if (lith1 && chan->desc->direction == LI_CCFG_DIR_OUT)
-		* (volatile unsigned long *) (lith1 + 0x500) = 0;
-}
-
-/*
- * li_activate_dma always starts dma at the beginning of the buffer.
- *
- * N.B., these may be called from interrupt.
- */
-
-static __inline__ void li_activate_dma(dma_chan_t *chan)
-{
-	chan->ctlval |= LI_CCTL_DMA_ENABLE;
-	DBGPV("ctlval = 0x%lx\n", chan->ctlval);
-	li_writel(chan->lith, chan->desc->ctlreg, chan->ctlval);
-}
-
-static void li_deactivate_dma(dma_chan_t *chan)
-{
-	lithium_t *lith = chan->lith;
-	void * lith2 = lith->page2;
-
-	chan->ctlval &= ~(LI_CCTL_DMA_ENABLE | LI_CCTL_RPTR | LI_CCTL_WPTR);
-	DBGPV("ctlval = 0x%lx\n", chan->ctlval);
-	DBGPV("ctlreg 0x%x = 0x%lx\n", chan->desc->ctlreg, chan->ctlval);
-	li_writel(lith, chan->desc->ctlreg, chan->ctlval);
-
-	/*
-	 * Offsets 0x98 and 0x9C on Lithium page 2 are undocumented,
-	 * unsupported registers that are internal copies of the DMA
-	 * read and write pointers.  Because of a Lithium bug, these
-	 * registers aren't zeroed correctly when DMA is shut off.  So
-	 * we whack them directly.
-	 *
-	 * I expect this to break in a future rev of Lithium.
-	 */
-
-	if (lith2 && chan->desc->direction == LI_CCFG_DIR_OUT) {
-		* (volatile unsigned long *) (lith2 + 0x98) = 0;
-		* (volatile unsigned long *) (lith2 + 0x9C) = 0;
-	}
-}
-
-/*
- * read/write the ring buffer pointers.  These routines' arguments and results
- * are byte offsets from the beginning of the ring buffer.
- */
-
-static __inline__ int li_read_swptr(dma_chan_t *chan)
-{
-	const unsigned long mask = chan->desc->swptrmask;
-
-	return CHUNKS_TO_BYTES(UNSHIFT_FIELD(chan->ctlval, mask));
-}
-
-static __inline__ int li_read_hwptr(dma_chan_t *chan)
-{
-	return CHUNKS_TO_BYTES(li_readb(chan->lith, chan->desc->hwptrreg));
-}
-
-static __inline__ void li_write_swptr(dma_chan_t *chan, int val)
-{
-	const unsigned long mask = chan->desc->swptrmask;
-
-	ASSERT(!(val & ~CHUNKS_TO_BYTES(0xFF)));
-	val = BYTES_TO_CHUNKS(val);
-	chan->ctlval = (chan->ctlval & ~mask) | SHIFT_FIELD(val, mask);
-	li_writeb(chan->lith, chan->desc->swptrreg, val);
-}
-
-/* li_read_USTMSC() returns a UST/MSC pair for the given channel. */
-
-static void li_read_USTMSC(dma_chan_t *chan, ustmsc_t *ustmsc)
-{
-	lithium_t *lith = chan->lith;
-	const dma_chan_desc_t *desc = chan->desc;
-	unsigned long now_low, now_high0, now_high1, chan_ust;
-
-	spin_lock(&lith->lock);
-	{
-		/*
-		 * retry until we do all five reads without the
-		 * high word changing.  (High word increments
-		 * every 2^32 microseconds, i.e., not often)
-		 */
-		do {
-			now_high0 = li_readl(lith, LI_UST_HIGH);
-			now_low = li_readl(lith, LI_UST_LOW);
-
-			/*
-			 * Lithium guarantees these two reads will be
-			 * atomic -- ust will not increment after msc
-			 * is read.
-			 */
-
-			ustmsc->msc = li_readl(lith, desc->mscreg);
-			chan_ust = li_readl(lith, desc->ustreg);
-
-			now_high1 = li_readl(lith, LI_UST_HIGH);
-		} while (now_high0 != now_high1);
-	}	
-	spin_unlock(&lith->lock);
-	ustmsc->ust = ((unsigned long long) now_high0 << 32 | chan_ust);
-}
-
-static void li_enable_interrupts(lithium_t *lith, unsigned int mask)
-{
-	DBGEV("(lith=0x%p, mask=0x%x)\n", lith, mask);
-
-	/* clear any already-pending interrupts. */
-
-	li_writel(lith, LI_INTR_STATUS, mask);
-
-	/* enable the interrupts. */
-
-	mask |= li_readl(lith, LI_INTR_MASK);
-	li_writel(lith, LI_INTR_MASK, mask);
-}
-
-static void li_disable_interrupts(lithium_t *lith, unsigned int mask)
-{
-	unsigned int keepmask;
-
-	DBGEV("(lith=0x%p, mask=0x%x)\n", lith, mask);
-
-	/* disable the interrupts */
-
-	keepmask = li_readl(lith, LI_INTR_MASK) & ~mask;
-	li_writel(lith, LI_INTR_MASK, keepmask);
-
-	/* clear any pending interrupts. */
-
-	li_writel(lith, LI_INTR_STATUS, mask);
-}
-
-/* Get the interrupt status and clear all pending interrupts. */
-
-static unsigned int li_get_clear_intr_status(lithium_t *lith)
-{
-	unsigned int status;
-
-	status = li_readl(lith, LI_INTR_STATUS);
-	li_writel(lith, LI_INTR_STATUS, ~0);
-	return status & li_readl(lith, LI_INTR_MASK);
-}
-
-static int li_init(lithium_t *lith)
-{
-	/* 1. System power supplies stabilize. */
-
-	/* 2. Assert the ~RESET signal. */
-
-	li_writel(lith, LI_HOST_CONTROLLER, LI_HC_RESET);
-	udelay(1);
-
-	/* 3. Deassert the ~RESET signal and enter a wait period to allow
-	   the AD1843 internal clocks and the external crystal oscillator
-	   to stabilize. */
-
-	li_writel(lith, LI_HOST_CONTROLLER, LI_HC_LINK_ENABLE);
-	udelay(1);
-
-	return 0;
-}
-
-/*****************************************************************************/
-/* AD1843 access */
-
-/*
- * AD1843 bitfield definitions.  All are named as in the AD1843 data
- * sheet, with ad1843_ prepended and individual bit numbers removed.
- *
- * E.g., bits LSS0 through LSS2 become ad1843_LSS.
- *
- * Only the bitfields we need are defined.
- */
-
-typedef struct ad1843_bitfield {
-	char reg;
-	char lo_bit;
-	char nbits;
-} ad1843_bitfield_t;
-
-static const ad1843_bitfield_t
-	ad1843_PDNO   = {  0, 14,  1 },	/* Converter Power-Down Flag */
-	ad1843_INIT   = {  0, 15,  1 },	/* Clock Initialization Flag */
-	ad1843_RIG    = {  2,  0,  4 },	/* Right ADC Input Gain */
-	ad1843_RMGE   = {  2,  4,  1 },	/* Right ADC Mic Gain Enable */
-	ad1843_RSS    = {  2,  5,  3 },	/* Right ADC Source Select */
-	ad1843_LIG    = {  2,  8,  4 },	/* Left ADC Input Gain */
-	ad1843_LMGE   = {  2, 12,  1 },	/* Left ADC Mic Gain Enable */
-	ad1843_LSS    = {  2, 13,  3 },	/* Left ADC Source Select */
-	ad1843_RX1M   = {  4,  0,  5 },	/* Right Aux 1 Mix Gain/Atten */
-	ad1843_RX1MM  = {  4,  7,  1 },	/* Right Aux 1 Mix Mute */
-	ad1843_LX1M   = {  4,  8,  5 },	/* Left Aux 1 Mix Gain/Atten */
-	ad1843_LX1MM  = {  4, 15,  1 },	/* Left Aux 1 Mix Mute */
-	ad1843_RX2M   = {  5,  0,  5 },	/* Right Aux 2 Mix Gain/Atten */
-	ad1843_RX2MM  = {  5,  7,  1 },	/* Right Aux 2 Mix Mute */
-	ad1843_LX2M   = {  5,  8,  5 },	/* Left Aux 2 Mix Gain/Atten */
-	ad1843_LX2MM  = {  5, 15,  1 },	/* Left Aux 2 Mix Mute */
-	ad1843_RMCM   = {  7,  0,  5 },	/* Right Mic Mix Gain/Atten */
-	ad1843_RMCMM  = {  7,  7,  1 },	/* Right Mic Mix Mute */
-	ad1843_LMCM   = {  7,  8,  5 },	/* Left Mic Mix Gain/Atten */
-	ad1843_LMCMM  = {  7, 15,  1 },	/* Left Mic Mix Mute */
-	ad1843_HPOS   = {  8,  4,  1 },	/* Headphone Output Voltage Swing */
-	ad1843_HPOM   = {  8,  5,  1 },	/* Headphone Output Mute */
-	ad1843_RDA1G  = {  9,  0,  6 },	/* Right DAC1 Analog/Digital Gain */
-	ad1843_RDA1GM = {  9,  7,  1 },	/* Right DAC1 Analog Mute */
-	ad1843_LDA1G  = {  9,  8,  6 },	/* Left DAC1 Analog/Digital Gain */
-	ad1843_LDA1GM = {  9, 15,  1 },	/* Left DAC1 Analog Mute */
-	ad1843_RDA1AM = { 11,  7,  1 },	/* Right DAC1 Digital Mute */
-	ad1843_LDA1AM = { 11, 15,  1 },	/* Left DAC1 Digital Mute */
-	ad1843_ADLC   = { 15,  0,  2 },	/* ADC Left Sample Rate Source */
-	ad1843_ADRC   = { 15,  2,  2 },	/* ADC Right Sample Rate Source */
-	ad1843_DA1C   = { 15,  8,  2 },	/* DAC1 Sample Rate Source */
-	ad1843_C1C    = { 17,  0, 16 },	/* Clock 1 Sample Rate Select */
-	ad1843_C2C    = { 20,  0, 16 },	/* Clock 1 Sample Rate Select */
-	ad1843_DAADL  = { 25,  4,  2 },	/* Digital ADC Left Source Select */
-	ad1843_DAADR  = { 25,  6,  2 },	/* Digital ADC Right Source Select */
-	ad1843_DRSFLT = { 25, 15,  1 },	/* Digital Reampler Filter Mode */
-	ad1843_ADLF   = { 26,  0,  2 }, /* ADC Left Channel Data Format */
-	ad1843_ADRF   = { 26,  2,  2 }, /* ADC Right Channel Data Format */
-	ad1843_ADTLK  = { 26,  4,  1 },	/* ADC Transmit Lock Mode Select */
-	ad1843_SCF    = { 26,  7,  1 },	/* SCLK Frequency Select */
-	ad1843_DA1F   = { 26,  8,  2 },	/* DAC1 Data Format Select */
-	ad1843_DA1SM  = { 26, 14,  1 },	/* DAC1 Stereo/Mono Mode Select */
-	ad1843_ADLEN  = { 27,  0,  1 },	/* ADC Left Channel Enable */
-	ad1843_ADREN  = { 27,  1,  1 },	/* ADC Right Channel Enable */
-	ad1843_AAMEN  = { 27,  4,  1 },	/* Analog to Analog Mix Enable */
-	ad1843_ANAEN  = { 27,  7,  1 },	/* Analog Channel Enable */
-	ad1843_DA1EN  = { 27,  8,  1 },	/* DAC1 Enable */
-	ad1843_DA2EN  = { 27,  9,  1 },	/* DAC2 Enable */
-	ad1843_C1EN   = { 28, 11,  1 },	/* Clock Generator 1 Enable */
-	ad1843_C2EN   = { 28, 12,  1 },	/* Clock Generator 2 Enable */
-	ad1843_PDNI   = { 28, 15,  1 };	/* Converter Power Down */
-
-/*
- * The various registers of the AD1843 use three different formats for
- * specifying gain.  The ad1843_gain structure parameterizes the
- * formats.
- */
-
-typedef struct ad1843_gain {
-
-	int	negative;		/* nonzero if gain is negative. */
-	const ad1843_bitfield_t *lfield;
-	const ad1843_bitfield_t *rfield;
-
-} ad1843_gain_t;
-
-static const ad1843_gain_t ad1843_gain_RECLEV
-				= { 0, &ad1843_LIG,   &ad1843_RIG };
-static const ad1843_gain_t ad1843_gain_LINE
-				= { 1, &ad1843_LX1M,  &ad1843_RX1M };
-static const ad1843_gain_t ad1843_gain_CD
-				= { 1, &ad1843_LX2M,  &ad1843_RX2M };
-static const ad1843_gain_t ad1843_gain_MIC
-				= { 1, &ad1843_LMCM,  &ad1843_RMCM };
-static const ad1843_gain_t ad1843_gain_PCM
-				= { 1, &ad1843_LDA1G, &ad1843_RDA1G };
-
-/* read the current value of an AD1843 bitfield. */
-
-static int ad1843_read_bits(lithium_t *lith, const ad1843_bitfield_t *field)
-{
-	int w = li_read_ad1843_reg(lith, field->reg);
-	int val = w >> field->lo_bit & ((1 << field->nbits) - 1);
-
-	DBGXV("ad1843_read_bits(lith=0x%p, field->{%d %d %d}) returns 0x%x\n",
-	      lith, field->reg, field->lo_bit, field->nbits, val);
-
-	return val;
-}
-
-/*
- * write a new value to an AD1843 bitfield and return the old value.
- */
-
-static int ad1843_write_bits(lithium_t *lith,
-			     const ad1843_bitfield_t *field,
-			     int newval)
-{
-	int w = li_read_ad1843_reg(lith, field->reg);
-	int mask = ((1 << field->nbits) - 1) << field->lo_bit;
-	int oldval = (w & mask) >> field->lo_bit;
-	int newbits = (newval << field->lo_bit) & mask;
-	w = (w & ~mask) | newbits;
-	(void) li_write_ad1843_reg(lith, field->reg, w);
-
-	DBGXV("ad1843_write_bits(lith=0x%p, field->{%d %d %d}, val=0x%x) "
-	      "returns 0x%x\n",
-	      lith, field->reg, field->lo_bit, field->nbits, newval,
-	      oldval);
-
-	return oldval;
-}
-
-/*
- * ad1843_read_multi reads multiple bitfields from the same AD1843
- * register.  It uses a single read cycle to do it.  (Reading the
- * ad1843 requires 256 bit times at 12.288 MHz, or nearly 20
- * microseconds.)
- *
- * Called ike this.
- *
- *  ad1843_read_multi(lith, nfields,
- *		      &ad1843_FIELD1, &val1,
- *		      &ad1843_FIELD2, &val2, ...);
- */
-
-static void ad1843_read_multi(lithium_t *lith, int argcount, ...)
-{
-	va_list ap;
-	const ad1843_bitfield_t *fp;
-	int w = 0, mask, *value, reg = -1;
-
-	va_start(ap, argcount);
-	while (--argcount >= 0) {
-		fp = va_arg(ap, const ad1843_bitfield_t *);
-		value = va_arg(ap, int *);
-		if (reg == -1) {
-			reg = fp->reg;
-			w = li_read_ad1843_reg(lith, reg);
-		}
-		ASSERT(reg == fp->reg);
-		mask = (1 << fp->nbits) - 1;
-		*value = w >> fp->lo_bit & mask;
-	}
-	va_end(ap);
-}
-
-/*
- * ad1843_write_multi stores multiple bitfields into the same AD1843
- * register.  It uses one read and one write cycle to do it.
- *
- * Called like this.
- *
- *  ad1843_write_multi(lith, nfields,
- *		       &ad1843_FIELD1, val1,
- *		       &ad1843_FIELF2, val2, ...);
- */
-
-static void ad1843_write_multi(lithium_t *lith, int argcount, ...)
-{
-	va_list ap;
-	int reg;
-	const ad1843_bitfield_t *fp;
-	int value;
-	int w, m, mask, bits;
-
-	mask = 0;
-	bits = 0;
-	reg = -1;
-
-	va_start(ap, argcount);
-	while (--argcount >= 0) {
-		fp = va_arg(ap, const ad1843_bitfield_t *);
-		value = va_arg(ap, int);
-		if (reg == -1)
-			reg = fp->reg;
-		ASSERT(fp->reg == reg);
-		m = ((1 << fp->nbits) - 1) << fp->lo_bit;
-		mask |= m;
-		bits |= (value << fp->lo_bit) & m;
-	}
-	va_end(ap);
-	ASSERT(!(bits & ~mask));
-	if (~mask & 0xFFFF)
-		w = li_read_ad1843_reg(lith, reg);
-	else
-		w = 0;
-	w = (w & ~mask) | bits;
-	(void) li_write_ad1843_reg(lith, reg, w);
-}
-
-/*
- * ad1843_get_gain reads the specified register and extracts the gain value
- * using the supplied gain type.  It returns the gain in OSS format.
- */
-
-static int ad1843_get_gain(lithium_t *lith, const ad1843_gain_t *gp)
-{
-	int lg, rg;
-	unsigned short mask = (1 << gp->lfield->nbits) - 1;
-
-	ad1843_read_multi(lith, 2, gp->lfield, &lg, gp->rfield, &rg);
-	if (gp->negative) {
-		lg = mask - lg;
-		rg = mask - rg;
-	}
-	lg = (lg * 100 + (mask >> 1)) / mask;
-	rg = (rg * 100 + (mask >> 1)) / mask;
-	return lg << 0 | rg << 8;
-}
-
-/*
- * Set an audio channel's gain. Converts from OSS format to AD1843's
- * format.
- *
- * Returns the new gain, which may be lower than the old gain.
- */
-
-static int ad1843_set_gain(lithium_t *lith,
-			   const ad1843_gain_t *gp,
-			   int newval)
-{
-	unsigned short mask = (1 << gp->lfield->nbits) - 1;
-
-	int lg = newval >> 0 & 0xFF;
-	int rg = newval >> 8;
-	if (lg < 0 || lg > 100 || rg < 0 || rg > 100)
-		return -EINVAL;
-	lg = (lg * mask + (mask >> 1)) / 100;
-	rg = (rg * mask + (mask >> 1)) / 100;
-	if (gp->negative) {
-		lg = mask - lg;
-		rg = mask - rg;
-	}
-	ad1843_write_multi(lith, 2, gp->lfield, lg, gp->rfield, rg);
-	return ad1843_get_gain(lith, gp);
-}
-
-/* Returns the current recording source, in OSS format. */
-
-static int ad1843_get_recsrc(lithium_t *lith)
-{
-	int ls = ad1843_read_bits(lith, &ad1843_LSS);
-
-	switch (ls) {
-	case 1:
-		return SOUND_MASK_MIC;
-	case 2:
-		return SOUND_MASK_LINE;
-	case 3:
-		return SOUND_MASK_CD;
-	case 6:
-		return SOUND_MASK_PCM;
-	default:
-		ASSERT(0);
-		return -1;
-	}
-}
-
-/*
- * Enable/disable digital resample mode in the AD1843.
- *
- * The AD1843 requires that ADL, ADR, DA1 and DA2 be powered down
- * while switching modes.  So we save DA1's state (DA2's state is not
- * interesting), power them down, switch into/out of resample mode,
- * power them up, and restore state.
- *
- * This will cause audible glitches if D/A or A/D is going on, so the
- * driver disallows that (in mixer_write_ioctl()).
- *
- * The open question is, is this worth doing?  I'm leaving it in,
- * because it's written, but...
- */
-
-static void ad1843_set_resample_mode(lithium_t *lith, int onoff)
-{
-	/* Save DA1 mute and gain (addr 9 is DA1 analog gain/attenuation) */
-	int save_da1 = li_read_ad1843_reg(lith, 9);
-
-	/* Power down A/D and D/A. */
-	ad1843_write_multi(lith, 4,
-			   &ad1843_DA1EN, 0,
-			   &ad1843_DA2EN, 0,
-			   &ad1843_ADLEN, 0,
-			   &ad1843_ADREN, 0);
-
-	/* Switch mode */
-	ASSERT(onoff == 0 || onoff == 1);
-	ad1843_write_bits(lith, &ad1843_DRSFLT, onoff);
-
- 	/* Power up A/D and D/A. */
-	ad1843_write_multi(lith, 3,
-			   &ad1843_DA1EN, 1,
-			   &ad1843_ADLEN, 1,
-			   &ad1843_ADREN, 1);
-
-	/* Restore DA1 mute and gain. */
-	li_write_ad1843_reg(lith, 9, save_da1);
-}
-
-/*
- * Set recording source.  Arg newsrc specifies an OSS channel mask.
- *
- * The complication is that when we switch into/out of loopback mode
- * (i.e., src = SOUND_MASK_PCM), we change the AD1843 into/out of
- * digital resampling mode.
- *
- * Returns newsrc on success, -errno on failure.
- */
-
-static int ad1843_set_recsrc(lithium_t *lith, int newsrc)
-{
-	int bits;
-	int oldbits;
-
-	switch (newsrc) {
-	case SOUND_MASK_PCM:
-		bits = 6;
-		break;
-
-	case SOUND_MASK_MIC:
-		bits = 1;
-		break;
-
-	case SOUND_MASK_LINE:
-		bits = 2;
-		break;
-
-	case SOUND_MASK_CD:
-		bits = 3;
-		break;
-
-	default:
-		return -EINVAL;
-	}
-	oldbits = ad1843_read_bits(lith, &ad1843_LSS);
-	if (newsrc == SOUND_MASK_PCM && oldbits != 6) {
-		DBGP("enabling digital resample mode\n");
-		ad1843_set_resample_mode(lith, 1);
-		ad1843_write_multi(lith, 2,
-				   &ad1843_DAADL, 2,
-				   &ad1843_DAADR, 2);
-	} else if (newsrc != SOUND_MASK_PCM && oldbits == 6) {
-		DBGP("disabling digital resample mode\n");
-		ad1843_set_resample_mode(lith, 0);
-		ad1843_write_multi(lith, 2,
-				   &ad1843_DAADL, 0,
-				   &ad1843_DAADR, 0);
-	}
-	ad1843_write_multi(lith, 2, &ad1843_LSS, bits, &ad1843_RSS, bits);
-	return newsrc;
-}
-
-/*
- * Return current output sources, in OSS format.
- */
-
-static int ad1843_get_outsrc(lithium_t *lith)
-{
-	int pcm, line, mic, cd;
-
-	pcm  = ad1843_read_bits(lith, &ad1843_LDA1GM) ? 0 : SOUND_MASK_PCM;
-	line = ad1843_read_bits(lith, &ad1843_LX1MM)  ? 0 : SOUND_MASK_LINE;
-	cd   = ad1843_read_bits(lith, &ad1843_LX2MM)  ? 0 : SOUND_MASK_CD;
-	mic  = ad1843_read_bits(lith, &ad1843_LMCMM)  ? 0 : SOUND_MASK_MIC;
-
-	return pcm | line | cd | mic;
-}
-
-/*
- * Set output sources.  Arg is a mask of active sources in OSS format.
- *
- * Returns source mask on success, -errno on failure.
- */
-
-static int ad1843_set_outsrc(lithium_t *lith, int mask)
-{
-	int pcm, line, mic, cd;
-
-	if (mask & ~(SOUND_MASK_PCM | SOUND_MASK_LINE |
-		     SOUND_MASK_CD | SOUND_MASK_MIC))
-		return -EINVAL;
-	pcm  = (mask & SOUND_MASK_PCM)  ? 0 : 1;
-	line = (mask & SOUND_MASK_LINE) ? 0 : 1;
-	mic  = (mask & SOUND_MASK_MIC)  ? 0 : 1;
-	cd   = (mask & SOUND_MASK_CD)   ? 0 : 1;
-
-	ad1843_write_multi(lith, 2, &ad1843_LDA1GM, pcm, &ad1843_RDA1GM, pcm);
-	ad1843_write_multi(lith, 2, &ad1843_LX1MM, line, &ad1843_RX1MM, line);
-	ad1843_write_multi(lith, 2, &ad1843_LX2MM, cd,   &ad1843_RX2MM, cd);
-	ad1843_write_multi(lith, 2, &ad1843_LMCMM, mic,  &ad1843_RMCMM, mic);
-
-	return mask;
-}
-
-/* Setup ad1843 for D/A conversion. */
-
-static void ad1843_setup_dac(lithium_t *lith,
-			     int framerate,
-			     int fmt,
-			     int channels)
-{
-	int ad_fmt = 0, ad_mode = 0;
-
-	DBGEV("(lith=0x%p, framerate=%d, fmt=%d, channels=%d)\n",
-	      lith, framerate, fmt, channels);
-
-	switch (fmt) {
-	case AFMT_S8:		ad_fmt = 1; break;
-	case AFMT_U8:		ad_fmt = 1; break;
-	case AFMT_S16_LE:	ad_fmt = 1; break;
-	case AFMT_MU_LAW:	ad_fmt = 2; break;
-	case AFMT_A_LAW:	ad_fmt = 3; break;
-	default:		ASSERT(0);
-	}
-
-	switch (channels) {
-	case 2:			ad_mode = 0; break;
-	case 1:			ad_mode = 1; break;
-	default:		ASSERT(0);
-	}
-		
-	DBGPV("ad_mode = %d, ad_fmt = %d\n", ad_mode, ad_fmt);
-	ASSERT(framerate >= 4000 && framerate <= 49000);
-	ad1843_write_bits(lith, &ad1843_C1C, framerate);
-	ad1843_write_multi(lith, 2,
-			   &ad1843_DA1SM, ad_mode, &ad1843_DA1F, ad_fmt);
-}
-
-static void ad1843_shutdown_dac(lithium_t *lith)
-{
-	ad1843_write_bits(lith, &ad1843_DA1F, 1);
-}
-
-static void ad1843_setup_adc(lithium_t *lith, int framerate, int fmt, int channels)
-{
-	int da_fmt = 0;
-
-	DBGEV("(lith=0x%p, framerate=%d, fmt=%d, channels=%d)\n",
-	      lith, framerate, fmt, channels);
-
-	switch (fmt) {
-	case AFMT_S8:		da_fmt = 1; break;
-	case AFMT_U8:		da_fmt = 1; break;
-	case AFMT_S16_LE:	da_fmt = 1; break;
-	case AFMT_MU_LAW:	da_fmt = 2; break;
-	case AFMT_A_LAW:	da_fmt = 3; break;
-	default:		ASSERT(0);
-	}
-
-	DBGPV("da_fmt = %d\n", da_fmt);
-	ASSERT(framerate >= 4000 && framerate <= 49000);
-	ad1843_write_bits(lith, &ad1843_C2C, framerate);
-	ad1843_write_multi(lith, 2,
-			   &ad1843_ADLF, da_fmt, &ad1843_ADRF, da_fmt);
-}
-
-static void ad1843_shutdown_adc(lithium_t *lith)
-{
-	/* nothing to do */
-}
-
-/*
- * Fully initialize the ad1843.  As described in the AD1843 data
- * sheet, section "START-UP SEQUENCE".  The numbered comments are
- * subsection headings from the data sheet.  See the data sheet, pages
- * 52-54, for more info.
- *
- * return 0 on success, -errno on failure.  */
-
-static int __init ad1843_init(lithium_t *lith)
-{
-	unsigned long later;
-	int err;
-
-	err = li_init(lith);
-	if (err)
-		return err;
-
-	if (ad1843_read_bits(lith, &ad1843_INIT) != 0) {
-		printk(KERN_ERR "vwsnd sound: AD1843 won't initialize\n");
-		return -EIO;
-	}
-
-	ad1843_write_bits(lith, &ad1843_SCF, 1);
-
-	/* 4. Put the conversion resources into standby. */
-
-	ad1843_write_bits(lith, &ad1843_PDNI, 0);
-	later = jiffies + HZ / 2;	/* roughly half a second */
-	DBGDO(shut_up++);
-	while (ad1843_read_bits(lith, &ad1843_PDNO)) {
-		if (time_after(jiffies, later)) {
-			printk(KERN_ERR
-			       "vwsnd audio: AD1843 won't power up\n");
-			return -EIO;
-		}
-		schedule();
-	}
-	DBGDO(shut_up--);
-
-	/* 5. Power up the clock generators and enable clock output pins. */
-
-	ad1843_write_multi(lith, 2, &ad1843_C1EN, 1, &ad1843_C2EN, 1);
-
-	/* 6. Configure conversion resources while they are in standby. */
-
- 	/* DAC1 uses clock 1 as source, ADC uses clock 2.  Always. */
-
-	ad1843_write_multi(lith, 3,
-			   &ad1843_DA1C, 1,
-			   &ad1843_ADLC, 2,
-			   &ad1843_ADRC, 2);
-
-	/* 7. Enable conversion resources. */
-
-	ad1843_write_bits(lith, &ad1843_ADTLK, 1);
-	ad1843_write_multi(lith, 5,
-			   &ad1843_ANAEN, 1,
-			   &ad1843_AAMEN, 1,
-			   &ad1843_DA1EN, 1,
-			   &ad1843_ADLEN, 1,
-			   &ad1843_ADREN, 1);
-
-	/* 8. Configure conversion resources while they are enabled. */
-
-	ad1843_write_bits(lith, &ad1843_DA1C, 1);
-
-	/* Unmute all channels. */
-
-	ad1843_set_outsrc(lith,
-			  (SOUND_MASK_PCM | SOUND_MASK_LINE |
-			   SOUND_MASK_MIC | SOUND_MASK_CD));
-	ad1843_write_multi(lith, 2, &ad1843_LDA1AM, 0, &ad1843_RDA1AM, 0);
-
-	/* Set default recording source to Line In and set
-	 * mic gain to +20 dB.
-	 */
-
-	ad1843_set_recsrc(lith, SOUND_MASK_LINE);
-	ad1843_write_multi(lith, 2, &ad1843_LMGE, 1, &ad1843_RMGE, 1);
-
-	/* Set Speaker Out level to +/- 4V and unmute it. */
-
-	ad1843_write_multi(lith, 2, &ad1843_HPOS, 1, &ad1843_HPOM, 0);
-
-	return 0;
-}
-
-/*****************************************************************************/
-/* PCM I/O */
-
-#define READ_INTR_MASK  (LI_INTR_COMM1_TRIG | LI_INTR_COMM1_OVERFLOW)
-#define WRITE_INTR_MASK (LI_INTR_COMM2_TRIG | LI_INTR_COMM2_UNDERFLOW)
-
-typedef enum vwsnd_port_swstate {	/* software state */
-	SW_OFF,
-	SW_INITIAL,
-	SW_RUN,
-	SW_DRAIN,
-} vwsnd_port_swstate_t;
-
-typedef enum vwsnd_port_hwstate {	/* hardware state */
-	HW_STOPPED,
-	HW_RUNNING,
-} vwsnd_port_hwstate_t;
-
-/*
- * These flags are read by ISR, but only written at baseline.
- */
-
-typedef enum vwsnd_port_flags {
-	DISABLED = 1 << 0,
-	ERFLOWN  = 1 << 1,		/* overflown or underflown */
-	HW_BUSY  = 1 << 2,
-} vwsnd_port_flags_t;
-
-/*
- * vwsnd_port is the per-port data structure.  Each device has two
- * ports, one for input and one for output.
- *
- * Locking:
- *
- *	port->lock protects: hwstate, flags, swb_[iu]_avail.
- *
- *	devc->io_mutex protects: swstate, sw_*, swb_[iu]_idx.
- *
- *	everything else is only written by open/release or
- *	pcm_{setup,shutdown}(), which are serialized by a
- *	combination of devc->open_mutex and devc->io_mutex.
- */
-
-typedef struct vwsnd_port {
-
-	spinlock_t	lock;
-	wait_queue_head_t queue;
-	vwsnd_port_swstate_t swstate;
-	vwsnd_port_hwstate_t hwstate;
-	vwsnd_port_flags_t flags;
-
-	int		sw_channels;
-	int		sw_samplefmt;
-	int		sw_framerate;
-	int		sample_size;
-	int		frame_size;
-	unsigned int	zero_word;	/* zero for the sample format */
-
-	int		sw_fragshift;
-	int		sw_fragcount;
-	int		sw_subdivshift;
-
-	unsigned int	hw_fragshift;
-	unsigned int	hw_fragsize;
-	unsigned int	hw_fragcount;
-
-	int		hwbuf_size;
-	unsigned long	hwbuf_paddr;
-	unsigned long	hwbuf_vaddr;
-	void *		hwbuf;		/* hwbuf == hwbuf_vaddr */
-	int		hwbuf_max;	/* max bytes to preload */
-
-	void *		swbuf;
-	unsigned int	swbuf_size;	/* size in bytes */
-	unsigned int	swb_u_idx;	/* index of next user byte */
-	unsigned int	swb_i_idx;	/* index of next intr byte */
-	unsigned int	swb_u_avail;	/* # bytes avail to user */
-	unsigned int	swb_i_avail;	/* # bytes avail to intr */
-
-	dma_chan_t	chan;
-
-	/* Accounting */
-
-	int		byte_count;
-	int		frag_count;
-	int		MSC_offset;
-
-} vwsnd_port_t;
-
-/* vwsnd_dev is the per-device data structure. */
-
-typedef struct vwsnd_dev {
-	struct vwsnd_dev *next_dev;
-	int		audio_minor;	/* minor number of audio device */
-	int		mixer_minor;	/* minor number of mixer device */
-
-	struct mutex open_mutex;
-	struct mutex io_mutex;
-	struct mutex mix_mutex;
-	fmode_t		open_mode;
-	wait_queue_head_t open_wait;
-
-	lithium_t	lith;
-
-	vwsnd_port_t	rport;
-	vwsnd_port_t	wport;
-} vwsnd_dev_t;
-
-static vwsnd_dev_t *vwsnd_dev_list;	/* linked list of all devices */
-
-static atomic_t vwsnd_use_count = ATOMIC_INIT(0);
-
-# define INC_USE_COUNT (atomic_inc(&vwsnd_use_count))
-# define DEC_USE_COUNT (atomic_dec(&vwsnd_use_count))
-# define IN_USE        (atomic_read(&vwsnd_use_count) != 0)
-
-/*
- * Lithium can only DMA multiples of 32 bytes.  Its DMA buffer may
- * be up to 8 Kb.  This driver always uses 8 Kb.
- *
- * Memory bug workaround -- I'm not sure what's going on here, but
- * somehow pcm_copy_out() was triggering segv's going on to the next
- * page of the hw buffer.  So, I make the hw buffer one size bigger
- * than we actually use.  That way, the following page is allocated
- * and mapped, and no error.  I suspect that something is broken
- * in Cobalt, but haven't really investigated.  HBO is the actual
- * size of the buffer, and HWBUF_ORDER is what we allocate.
- */
-
-#define HWBUF_SHIFT 13
-#define HWBUF_SIZE (1 << HWBUF_SHIFT)
-# define HBO         (HWBUF_SHIFT > PAGE_SHIFT ? HWBUF_SHIFT - PAGE_SHIFT : 0)
-# define HWBUF_ORDER (HBO + 1)		/* next size bigger */
-#define MIN_SPEED 4000
-#define MAX_SPEED 49000
-
-#define MIN_FRAGSHIFT			(DMACHUNK_SHIFT + 1)
-#define MAX_FRAGSHIFT			(PAGE_SHIFT)
-#define MIN_FRAGSIZE			(1 << MIN_FRAGSHIFT)
-#define MAX_FRAGSIZE			(1 << MAX_FRAGSHIFT)
-#define MIN_FRAGCOUNT(fragsize)		3
-#define MAX_FRAGCOUNT(fragsize)		(32 * PAGE_SIZE / (fragsize))
-#define DEFAULT_FRAGSHIFT		12
-#define DEFAULT_FRAGCOUNT		16
-#define DEFAULT_SUBDIVSHIFT		0
-
-/*
- * The software buffer (swbuf) is a ring buffer shared between user
- * level and interrupt level.  Each level owns some of the bytes in
- * the buffer, and may give bytes away by calling swb_inc_{u,i}().
- * User level calls _u for user, and interrupt level calls _i for
- * interrupt.
- *
- * port->swb_{u,i}_avail is the number of bytes available to that level.
- *
- * port->swb_{u,i}_idx is the index of the first available byte in the
- * buffer.
- *
- * Each level calls swb_inc_{u,i}() to atomically increment its index,
- * recalculate the number of bytes available for both sides, and
- * return the number of bytes available.  Since each side can only
- * give away bytes, the other side can only increase the number of
- * bytes available to this side.  Each side updates its own index
- * variable, swb_{u,i}_idx, so no lock is needed to read it.
- *
- * To query the number of bytes available, call swb_inc_{u,i} with an
- * increment of zero.
- */
-
-static __inline__ unsigned int __swb_inc_u(vwsnd_port_t *port, int inc)
-{
-	if (inc) {
-		port->swb_u_idx += inc;
-		port->swb_u_idx %= port->swbuf_size;
-		port->swb_u_avail -= inc;
-		port->swb_i_avail += inc;
-	}
-	return port->swb_u_avail;
-}
-
-static __inline__ unsigned int swb_inc_u(vwsnd_port_t *port, int inc)
-{
-	unsigned long flags;
-	unsigned int ret;
-
-	spin_lock_irqsave(&port->lock, flags);
-	{
-		ret = __swb_inc_u(port, inc);
-	}
-	spin_unlock_irqrestore(&port->lock, flags);
-	return ret;
-}
-
-static __inline__ unsigned int __swb_inc_i(vwsnd_port_t *port, int inc)
-{
-	if (inc) {
-		port->swb_i_idx += inc;
-		port->swb_i_idx %= port->swbuf_size;
-		port->swb_i_avail -= inc;
-		port->swb_u_avail += inc;
-	}
-	return port->swb_i_avail;
-}
-
-static __inline__ unsigned int swb_inc_i(vwsnd_port_t *port, int inc)
-{
-	unsigned long flags;
-	unsigned int ret;
-
-	spin_lock_irqsave(&port->lock, flags);
-	{
-		ret = __swb_inc_i(port, inc);
-	}
-	spin_unlock_irqrestore(&port->lock, flags);
-	return ret;
-}
-
-/*
- * pcm_setup - this routine initializes all port state after
- * mode-setting ioctls have been done, but before the first I/O is
- * done.
- *
- * Locking: called with devc->io_mutex held.
- *
- * Returns 0 on success, -errno on failure.
- */
-
-static int pcm_setup(vwsnd_dev_t *devc,
-		     vwsnd_port_t *rport,
-		     vwsnd_port_t *wport)
-{
-	vwsnd_port_t *aport = rport ? rport : wport;
-	int sample_size;
-	unsigned int zero_word;
-
-	DBGEV("(devc=0x%p, rport=0x%p, wport=0x%p)\n", devc, rport, wport);
-
-	ASSERT(aport != NULL);
-	if (aport->swbuf != NULL)
-		return 0;
-	switch (aport->sw_samplefmt) {
-	case AFMT_MU_LAW:
-		sample_size = 1;
-		zero_word = 0xFFFFFFFF ^ 0x80808080;
-		break;
-
-	case AFMT_A_LAW:
-		sample_size = 1;
-		zero_word = 0xD5D5D5D5 ^ 0x80808080;
-		break;
-
-	case AFMT_U8:
-		sample_size = 1;
-		zero_word = 0x80808080;
-		break;
-
-	case AFMT_S8:
-		sample_size = 1;
-		zero_word = 0x00000000;
-		break;
-
-	case AFMT_S16_LE:
-		sample_size = 2;
-		zero_word = 0x00000000;
-		break;
-
-	default:
-		sample_size = 0;	/* prevent compiler warning */
-		zero_word = 0;
-		ASSERT(0);
-	}
-	aport->sample_size  = sample_size;
-	aport->zero_word    = zero_word;
-	aport->frame_size   = aport->sw_channels * aport->sample_size;
-	aport->hw_fragshift = aport->sw_fragshift - aport->sw_subdivshift;
-	aport->hw_fragsize  = 1 << aport->hw_fragshift;
-	aport->hw_fragcount = aport->sw_fragcount << aport->sw_subdivshift;
-	ASSERT(aport->hw_fragsize >= MIN_FRAGSIZE);
-	ASSERT(aport->hw_fragsize <= MAX_FRAGSIZE);
-	ASSERT(aport->hw_fragcount >= MIN_FRAGCOUNT(aport->hw_fragsize));
-	ASSERT(aport->hw_fragcount <= MAX_FRAGCOUNT(aport->hw_fragsize));
-	if (rport) {
-		int hwfrags, swfrags;
-		rport->hwbuf_max = aport->hwbuf_size - DMACHUNK_SIZE;
-		hwfrags = rport->hwbuf_max >> aport->hw_fragshift;
-		swfrags = aport->hw_fragcount - hwfrags;
-		if (swfrags < 2)
-			swfrags = 2;
-		rport->swbuf_size = swfrags * aport->hw_fragsize;
-		DBGPV("hwfrags = %d, swfrags = %d\n", hwfrags, swfrags);
-		DBGPV("read hwbuf_max = %d, swbuf_size = %d\n",
-		     rport->hwbuf_max, rport->swbuf_size);
-	}
-	if (wport) {
-		int hwfrags, swfrags;
-		int total_bytes = aport->hw_fragcount * aport->hw_fragsize;
-		wport->hwbuf_max = aport->hwbuf_size - DMACHUNK_SIZE;
-		if (wport->hwbuf_max > total_bytes)
-			wport->hwbuf_max = total_bytes;
-		hwfrags = wport->hwbuf_max >> aport->hw_fragshift;
-		DBGPV("hwfrags = %d\n", hwfrags);
-		swfrags = aport->hw_fragcount - hwfrags;
-		if (swfrags < 2)
-			swfrags = 2;
-		wport->swbuf_size = swfrags * aport->hw_fragsize;
-		DBGPV("hwfrags = %d, swfrags = %d\n", hwfrags, swfrags);
-		DBGPV("write hwbuf_max = %d, swbuf_size = %d\n",
-		     wport->hwbuf_max, wport->swbuf_size);
-	}
-
-	aport->swb_u_idx    = 0;
-	aport->swb_i_idx    = 0;
-	aport->byte_count   = 0;
-
-	/*
-	 * Is this a Cobalt bug?  We need to make this buffer extend
-	 * one page further than we actually use -- somehow memcpy
-	 * causes an exceptoin otherwise.  I suspect there's a bug in
-	 * Cobalt (or somewhere) where it's generating a fault on a
-	 * speculative load or something.  Obviously, I haven't taken
-	 * the time to track it down.
-	 */
-
-	aport->swbuf        = vmalloc(aport->swbuf_size + PAGE_SIZE);
-	if (!aport->swbuf)
-		return -ENOMEM;
-	if (rport && wport) {
-		ASSERT(aport == rport);
-		ASSERT(wport->swbuf == NULL);
-		/* One extra page - see comment above. */
-		wport->swbuf = vmalloc(aport->swbuf_size + PAGE_SIZE);
-		if (!wport->swbuf) {
-			vfree(aport->swbuf);
-			aport->swbuf = NULL;
-			return -ENOMEM;
-		}
-		wport->sample_size  = rport->sample_size;
-		wport->zero_word    = rport->zero_word;
-		wport->frame_size   = rport->frame_size;
-		wport->hw_fragshift = rport->hw_fragshift;
-		wport->hw_fragsize  = rport->hw_fragsize;
-		wport->hw_fragcount = rport->hw_fragcount;
-		wport->swbuf_size   = rport->swbuf_size;
-		wport->hwbuf_max    = rport->hwbuf_max;
-		wport->swb_u_idx    = rport->swb_u_idx;
-		wport->swb_i_idx    = rport->swb_i_idx;
-		wport->byte_count   = rport->byte_count;
-	}
-	if (rport) {
-		rport->swb_u_avail = 0;
-		rport->swb_i_avail = rport->swbuf_size;
-		rport->swstate = SW_RUN;
-		li_setup_dma(&rport->chan,
-			     &li_comm1,
-			     &devc->lith,
-			     rport->hwbuf_paddr,
-			     HWBUF_SHIFT,
-			     rport->hw_fragshift,
-			     rport->sw_channels,
-			     rport->sample_size);
-		ad1843_setup_adc(&devc->lith,
-				 rport->sw_framerate,
-				 rport->sw_samplefmt,
-				 rport->sw_channels);
-		li_enable_interrupts(&devc->lith, READ_INTR_MASK);
-		if (!(rport->flags & DISABLED)) {
-			ustmsc_t ustmsc;
-			rport->hwstate = HW_RUNNING;
-			li_activate_dma(&rport->chan);
-			li_read_USTMSC(&rport->chan, &ustmsc);
-			rport->MSC_offset = ustmsc.msc;
-		}
-	}
-	if (wport) {
-		if (wport->hwbuf_max > wport->swbuf_size)
-			wport->hwbuf_max = wport->swbuf_size;
-		wport->flags &= ~ERFLOWN;
-		wport->swb_u_avail = wport->swbuf_size;
-		wport->swb_i_avail = 0;
-		wport->swstate = SW_RUN;
-		li_setup_dma(&wport->chan,
-			     &li_comm2,
-			     &devc->lith,
-			     wport->hwbuf_paddr,
-			     HWBUF_SHIFT,
-			     wport->hw_fragshift,
-			     wport->sw_channels,
-			     wport->sample_size);
-		ad1843_setup_dac(&devc->lith,
-				 wport->sw_framerate,
-				 wport->sw_samplefmt,
-				 wport->sw_channels);
-		li_enable_interrupts(&devc->lith, WRITE_INTR_MASK);
-	}
-	DBGRV();
-	return 0;
-}
-
-/*
- * pcm_shutdown_port - shut down one port (direction) for PCM I/O.
- * Only called from pcm_shutdown.
- */
-
-static void pcm_shutdown_port(vwsnd_dev_t *devc,
-			      vwsnd_port_t *aport,
-			      unsigned int mask)
-{
-	unsigned long flags;
-	vwsnd_port_hwstate_t hwstate;
-	DECLARE_WAITQUEUE(wait, current);
-
-	aport->swstate = SW_INITIAL;
-	add_wait_queue(&aport->queue, &wait);
-	while (1) {
-		set_current_state(TASK_UNINTERRUPTIBLE);
-		spin_lock_irqsave(&aport->lock, flags);
-		{
-			hwstate = aport->hwstate;
-		}		
-		spin_unlock_irqrestore(&aport->lock, flags);
-		if (hwstate == HW_STOPPED)
-			break;
-		schedule();
-	}
-	current->state = TASK_RUNNING;
-	remove_wait_queue(&aport->queue, &wait);
-	li_disable_interrupts(&devc->lith, mask);
-	if (aport == &devc->rport)
-		ad1843_shutdown_adc(&devc->lith);
-	else /* aport == &devc->wport) */
-		ad1843_shutdown_dac(&devc->lith);
-	li_shutdown_dma(&aport->chan);
-	vfree(aport->swbuf);
-	aport->swbuf = NULL;
-	aport->byte_count = 0;
-}
-
-/*
- * pcm_shutdown undoes what pcm_setup did.
- * Also sets the ports' swstate to newstate.
- */
-
-static void pcm_shutdown(vwsnd_dev_t *devc,
-			 vwsnd_port_t *rport,
-			 vwsnd_port_t *wport)
-{
-	DBGEV("(devc=0x%p, rport=0x%p, wport=0x%p)\n", devc, rport, wport);
-
-	if (rport && rport->swbuf) {
-		DBGPV("shutting down rport\n");
-		pcm_shutdown_port(devc, rport, READ_INTR_MASK);
-	}
-	if (wport && wport->swbuf) {
-		DBGPV("shutting down wport\n");
-		pcm_shutdown_port(devc, wport, WRITE_INTR_MASK);
-	}
-	DBGRV();
-}
-
-static void pcm_copy_in(vwsnd_port_t *rport, int swidx, int hwidx, int nb)
-{
-	char *src = rport->hwbuf + hwidx;
-	char *dst = rport->swbuf + swidx;
-	int fmt = rport->sw_samplefmt;
-
-	DBGPV("swidx = %d, hwidx = %d\n", swidx, hwidx);
-	ASSERT(rport->hwbuf != NULL);
-	ASSERT(rport->swbuf != NULL);
-	ASSERT(nb > 0 && (nb % 32) == 0);
-	ASSERT(swidx % 32 == 0 && hwidx % 32 == 0);
-	ASSERT(swidx >= 0 && swidx + nb <= rport->swbuf_size);
-	ASSERT(hwidx >= 0 && hwidx + nb <= rport->hwbuf_size);
-
-	if (fmt == AFMT_MU_LAW || fmt == AFMT_A_LAW || fmt == AFMT_S8) {
-
-		/* See Sample Format Notes above. */
-
-		char *end = src + nb;
-		while (src < end)
-			*dst++ = *src++ ^ 0x80;
-	} else
-		memcpy(dst, src, nb);
-}
-
-static void pcm_copy_out(vwsnd_port_t *wport, int swidx, int hwidx, int nb)
-{
-	char *src = wport->swbuf + swidx;
-	char *dst = wport->hwbuf + hwidx;
-	int fmt = wport->sw_samplefmt;
-
-	ASSERT(nb > 0 && (nb % 32) == 0);
-	ASSERT(wport->hwbuf != NULL);
-	ASSERT(wport->swbuf != NULL);
-	ASSERT(swidx % 32 == 0 && hwidx % 32 == 0);
-	ASSERT(swidx >= 0 && swidx + nb <= wport->swbuf_size);
-	ASSERT(hwidx >= 0 && hwidx + nb <= wport->hwbuf_size);
-	if (fmt == AFMT_MU_LAW || fmt == AFMT_A_LAW || fmt == AFMT_S8) {
-
-		/* See Sample Format Notes above. */
-
-		char *end = src + nb;
-		while (src < end)
-			*dst++ = *src++ ^ 0x80;
-	} else
-		memcpy(dst, src, nb);
-}
-
-/*
- * pcm_output() is called both from baselevel and from interrupt level.
- * This is where audio frames are copied into the hardware-accessible
- * ring buffer.
- *
- * Locking note: The part of this routine that figures out what to do
- * holds wport->lock.  The longer part releases wport->lock, but sets
- * wport->flags & HW_BUSY.  Afterward, it reacquires wport->lock, and
- * checks for more work to do.
- *
- * If another thread calls pcm_output() while HW_BUSY is set, it
- * returns immediately, knowing that the thread that set HW_BUSY will
- * look for more work to do before returning.
- *
- * This has the advantage that port->lock is held for several short
- * periods instead of one long period.  Also, when pcm_output is
- * called from base level, it reenables interrupts.
- */
-
-static void pcm_output(vwsnd_dev_t *devc, int erflown, int nb)
-{
-	vwsnd_port_t *wport = &devc->wport;
-	const int hwmax  = wport->hwbuf_max;
-	const int hwsize = wport->hwbuf_size;
-	const int swsize = wport->swbuf_size;
-	const int fragsize = wport->hw_fragsize;
-	unsigned long iflags;
-
-	DBGEV("(devc=0x%p, erflown=%d, nb=%d)\n", devc, erflown, nb);
-	spin_lock_irqsave(&wport->lock, iflags);
-	if (erflown)
-		wport->flags |= ERFLOWN;
-	(void) __swb_inc_u(wport, nb);
-	if (wport->flags & HW_BUSY) {
-		spin_unlock_irqrestore(&wport->lock, iflags);
-		DBGPV("returning: HW BUSY\n");
-		return;
-	}
-	if (wport->flags & DISABLED) {
-		spin_unlock_irqrestore(&wport->lock, iflags);
-		DBGPV("returning: DISABLED\n");
-		return;
-	}
-	wport->flags |= HW_BUSY;
-	while (1) {
-		int swptr, hwptr, hw_avail, sw_avail, swidx;
-		vwsnd_port_hwstate_t hwstate = wport->hwstate;
-		vwsnd_port_swstate_t swstate = wport->swstate;
-		int hw_unavail;
-		ustmsc_t ustmsc;
-
-		hwptr = li_read_hwptr(&wport->chan);
-		swptr = li_read_swptr(&wport->chan);
-		hw_unavail = (swptr - hwptr + hwsize) % hwsize;
-		hw_avail = (hwmax - hw_unavail) & -fragsize;
-		sw_avail = wport->swb_i_avail & -fragsize;
-		if (sw_avail && swstate == SW_RUN) {
-			if (wport->flags & ERFLOWN) {
-				wport->flags &= ~ERFLOWN;
-			}
-		} else if (swstate == SW_INITIAL ||
-			 swstate == SW_OFF ||
-			 (swstate == SW_DRAIN &&
-			  !sw_avail &&
-			  (wport->flags & ERFLOWN))) {
-			DBGP("stopping.  hwstate = %d\n", hwstate);
-			if (hwstate != HW_STOPPED) {
-				li_deactivate_dma(&wport->chan);
-				wport->hwstate = HW_STOPPED;
-			}
-			wake_up(&wport->queue);
-			break;
-		}
-		if (!sw_avail || !hw_avail)
-			break;
-		spin_unlock_irqrestore(&wport->lock, iflags);
-
-		/*
-		 * We gave up the port lock, but we have the HW_BUSY flag.
-		 * Proceed without accessing any nonlocal state.
-		 * Do not exit the loop -- must check for more work.
-		 */
-
-		swidx = wport->swb_i_idx;
-		nb = hw_avail;
-		if (nb > sw_avail)
-			nb = sw_avail;
-		if (nb > hwsize - swptr)
-			nb = hwsize - swptr; /* don't overflow hwbuf */
-		if (nb > swsize - swidx)
-			nb = swsize - swidx; /* don't overflow swbuf */
-		ASSERT(nb > 0);
-		if (nb % fragsize) {
-			DBGP("nb = %d, fragsize = %d\n", nb, fragsize);
-			DBGP("hw_avail = %d\n", hw_avail);
-			DBGP("sw_avail = %d\n", sw_avail);
-			DBGP("hwsize = %d, swptr = %d\n", hwsize, swptr);
-			DBGP("swsize = %d, swidx = %d\n", swsize, swidx);
-		}
-		ASSERT(!(nb % fragsize));
-		DBGPV("copying swb[%d..%d] to hwb[%d..%d]\n",
-		      swidx, swidx + nb, swptr, swptr + nb);
-		pcm_copy_out(wport, swidx, swptr, nb);
-		li_write_swptr(&wport->chan, (swptr + nb) % hwsize);
-		spin_lock_irqsave(&wport->lock, iflags);
-		if (hwstate == HW_STOPPED) {
-			DBGPV("starting\n");
-			li_activate_dma(&wport->chan);
-			wport->hwstate = HW_RUNNING;
-			li_read_USTMSC(&wport->chan, &ustmsc);
-			ASSERT(wport->byte_count % wport->frame_size == 0);
-			wport->MSC_offset = ustmsc.msc - wport->byte_count / wport->frame_size;
-		}
-		__swb_inc_i(wport, nb);
-		wport->byte_count += nb;
-		wport->frag_count += nb / fragsize;
-		ASSERT(nb % fragsize == 0);
-		wake_up(&wport->queue);
-	}
-	wport->flags &= ~HW_BUSY;
-	spin_unlock_irqrestore(&wport->lock, iflags);
-	DBGRV();
-}
-
-/*
- * pcm_input() is called both from baselevel and from interrupt level.
- * This is where audio frames are copied out of the hardware-accessible
- * ring buffer.
- *
- * Locking note: The part of this routine that figures out what to do
- * holds rport->lock.  The longer part releases rport->lock, but sets
- * rport->flags & HW_BUSY.  Afterward, it reacquires rport->lock, and
- * checks for more work to do.
- *
- * If another thread calls pcm_input() while HW_BUSY is set, it
- * returns immediately, knowing that the thread that set HW_BUSY will
- * look for more work to do before returning.
- *
- * This has the advantage that port->lock is held for several short
- * periods instead of one long period.  Also, when pcm_input is
- * called from base level, it reenables interrupts.
- */
-
-static void pcm_input(vwsnd_dev_t *devc, int erflown, int nb)
-{
-	vwsnd_port_t *rport = &devc->rport;
-	const int hwmax  = rport->hwbuf_max;
-	const int hwsize = rport->hwbuf_size;
-	const int swsize = rport->swbuf_size;
-	const int fragsize = rport->hw_fragsize;
-	unsigned long iflags;
-
-	DBGEV("(devc=0x%p, erflown=%d, nb=%d)\n", devc, erflown, nb);
-
-	spin_lock_irqsave(&rport->lock, iflags);
-	if (erflown)
-		rport->flags |= ERFLOWN;
-	(void) __swb_inc_u(rport, nb);
-	if (rport->flags & HW_BUSY || !rport->swbuf) {
-		spin_unlock_irqrestore(&rport->lock, iflags);
-		DBGPV("returning: HW BUSY or !swbuf\n");
-		return;
-	}
-	if (rport->flags & DISABLED) {
-		spin_unlock_irqrestore(&rport->lock, iflags);
-		DBGPV("returning: DISABLED\n");
-		return;
-	}
-	rport->flags |= HW_BUSY;
-	while (1) {
-		int swptr, hwptr, hw_avail, sw_avail, swidx;
-		vwsnd_port_hwstate_t hwstate = rport->hwstate;
-		vwsnd_port_swstate_t swstate = rport->swstate;
-
-		hwptr = li_read_hwptr(&rport->chan);
-		swptr = li_read_swptr(&rport->chan);
-		hw_avail = (hwptr - swptr + hwsize) % hwsize & -fragsize;
-		if (hw_avail > hwmax)
-			hw_avail = hwmax;
-		sw_avail = rport->swb_i_avail & -fragsize;
-		if (swstate != SW_RUN) {
-			DBGP("stopping.  hwstate = %d\n", hwstate);
-			if (hwstate != HW_STOPPED) {
-				li_deactivate_dma(&rport->chan);
-				rport->hwstate = HW_STOPPED;
-			}
-			wake_up(&rport->queue);
-			break;
-		}
-		if (!sw_avail || !hw_avail)
-			break;
-		spin_unlock_irqrestore(&rport->lock, iflags);
-
-		/*
-		 * We gave up the port lock, but we have the HW_BUSY flag.
-		 * Proceed without accessing any nonlocal state.
-		 * Do not exit the loop -- must check for more work.
-		 */
-
-		swidx = rport->swb_i_idx;
-		nb = hw_avail;
-		if (nb > sw_avail)
-			nb = sw_avail;
-		if (nb > hwsize - swptr)
-			nb = hwsize - swptr; /* don't overflow hwbuf */
-		if (nb > swsize - swidx)
-			nb = swsize - swidx; /* don't overflow swbuf */
-		ASSERT(nb > 0);
-		if (nb % fragsize) {
-			DBGP("nb = %d, fragsize = %d\n", nb, fragsize);
-			DBGP("hw_avail = %d\n", hw_avail);
-			DBGP("sw_avail = %d\n", sw_avail);
-			DBGP("hwsize = %d, swptr = %d\n", hwsize, swptr);
-			DBGP("swsize = %d, swidx = %d\n", swsize, swidx);
-		}
-		ASSERT(!(nb % fragsize));
-		DBGPV("copying hwb[%d..%d] to swb[%d..%d]\n",
-		      swptr, swptr + nb, swidx, swidx + nb);
-		pcm_copy_in(rport, swidx, swptr, nb);
-		li_write_swptr(&rport->chan, (swptr + nb) % hwsize);
-		spin_lock_irqsave(&rport->lock, iflags);
-		__swb_inc_i(rport, nb);
-		rport->byte_count += nb;
-		rport->frag_count += nb / fragsize;
-		ASSERT(nb % fragsize == 0);
-		wake_up(&rport->queue);
-	}
-	rport->flags &= ~HW_BUSY;
-	spin_unlock_irqrestore(&rport->lock, iflags);
-	DBGRV();
-}
-
-/*
- * pcm_flush_frag() writes zero samples to fill the current fragment,
- * then flushes it to the hardware.
- *
- * It is only meaningful to flush output, not input.
- */
-
-static void pcm_flush_frag(vwsnd_dev_t *devc)
-{
-	vwsnd_port_t *wport = &devc->wport;
-
-	DBGPV("swstate = %d\n", wport->swstate);
-	if (wport->swstate == SW_RUN) {
-		int idx = wport->swb_u_idx;
-		int end = (idx + wport->hw_fragsize - 1)
-			>> wport->hw_fragshift
-			<< wport->hw_fragshift;
-		int nb = end - idx;
-		DBGPV("clearing %d bytes\n", nb);
-		if (nb)
-			memset(wport->swbuf + idx,
-			       (char) wport->zero_word,
-			       nb);
-		wport->swstate = SW_DRAIN;
-		pcm_output(devc, 0, nb);
-	}
-	DBGRV();
-}
-
-/*
- * Wait for output to drain.  This sleeps uninterruptibly because
- * there is nothing intelligent we can do if interrupted.  This
- * means the process will be delayed in responding to the signal.
- */
-
-static void pcm_write_sync(vwsnd_dev_t *devc)
-{
-	vwsnd_port_t *wport = &devc->wport;
-	DECLARE_WAITQUEUE(wait, current);
-	unsigned long flags;
-	vwsnd_port_hwstate_t hwstate;
-
-	DBGEV("(devc=0x%p)\n", devc);
-	add_wait_queue(&wport->queue, &wait);
-	while (1) {
-		set_current_state(TASK_UNINTERRUPTIBLE);
-		spin_lock_irqsave(&wport->lock, flags);
-		{
-			hwstate = wport->hwstate;
-		}
-		spin_unlock_irqrestore(&wport->lock, flags);
-		if (hwstate == HW_STOPPED)
-			break;
-		schedule();
-	}
-	current->state = TASK_RUNNING;
-	remove_wait_queue(&wport->queue, &wait);
-	DBGPV("swstate = %d, hwstate = %d\n", wport->swstate, wport->hwstate);
-	DBGRV();
-}
-
-/*****************************************************************************/
-/* audio driver */
-
-/*
- * seek on an audio device always fails.
- */
-
-static void vwsnd_audio_read_intr(vwsnd_dev_t *devc, unsigned int status)
-{
-	int overflown = status & LI_INTR_COMM1_OVERFLOW;
-
-	if (status & READ_INTR_MASK)
-		pcm_input(devc, overflown, 0);
-}
-
-static void vwsnd_audio_write_intr(vwsnd_dev_t *devc, unsigned int status)
-{
-	int underflown = status & LI_INTR_COMM2_UNDERFLOW;
-
-	if (status & WRITE_INTR_MASK)
-		pcm_output(devc, underflown, 0);
-}
-
-static irqreturn_t vwsnd_audio_intr(int irq, void *dev_id)
-{
-	vwsnd_dev_t *devc = dev_id;
-	unsigned int status;
-
-	DBGEV("(irq=%d, dev_id=0x%p)\n", irq, dev_id);
-
-	status = li_get_clear_intr_status(&devc->lith);
-	vwsnd_audio_read_intr(devc, status);
-	vwsnd_audio_write_intr(devc, status);
-	return IRQ_HANDLED;
-}
-
-static ssize_t vwsnd_audio_do_read(struct file *file,
-				   char *buffer,
-				   size_t count,
-				   loff_t *ppos)
-{
-	vwsnd_dev_t *devc = file->private_data;
-	vwsnd_port_t *rport = ((file->f_mode & FMODE_READ) ?
-			       &devc->rport : NULL);
-	int ret, nb;
-
-	DBGEV("(file=0x%p, buffer=0x%p, count=%d, ppos=0x%p)\n",
-	     file, buffer, count, ppos);
-
-	if (!rport)
-		return -EINVAL;
-
-	if (rport->swbuf == NULL) {
-		vwsnd_port_t *wport = (file->f_mode & FMODE_WRITE) ?
-			&devc->wport : NULL;
-		ret = pcm_setup(devc, rport, wport);
-		if (ret < 0)
-			return ret;
-	}
-
-	if (!access_ok(VERIFY_READ, buffer, count))
-		return -EFAULT;
-	ret = 0;
-	while (count) {
-		DECLARE_WAITQUEUE(wait, current);
-		add_wait_queue(&rport->queue, &wait);
-		while ((nb = swb_inc_u(rport, 0)) == 0) {
-			DBGPV("blocking\n");
-			set_current_state(TASK_INTERRUPTIBLE);
-			if (rport->flags & DISABLED ||
-			    file->f_flags & O_NONBLOCK) {
-				current->state = TASK_RUNNING;
-				remove_wait_queue(&rport->queue, &wait);
-				return ret ? ret : -EAGAIN;
-			}
-			schedule();
-			if (signal_pending(current)) {
-				current->state = TASK_RUNNING;
-				remove_wait_queue(&rport->queue, &wait);
-				return ret ? ret : -ERESTARTSYS;
-			}
-		}
-		current->state = TASK_RUNNING;
-		remove_wait_queue(&rport->queue, &wait);
-		pcm_input(devc, 0, 0);
-		/* nb bytes are available in userbuf. */
-		if (nb > count)
-			nb = count;
-		DBGPV("nb = %d\n", nb);
-		if (copy_to_user(buffer, rport->swbuf + rport->swb_u_idx, nb))
-			return -EFAULT;
-		(void) swb_inc_u(rport, nb);
-		buffer += nb;
-		count -= nb;
-		ret += nb;
-	}
-	DBGPV("returning %d\n", ret);
-	return ret;
-}
-
-static ssize_t vwsnd_audio_read(struct file *file,
-				char *buffer,
-				size_t count,
-				loff_t *ppos)
-{
-	vwsnd_dev_t *devc = file->private_data;
-	ssize_t ret;
-
-	mutex_lock(&devc->io_mutex);
-	ret = vwsnd_audio_do_read(file, buffer, count, ppos);
-	mutex_unlock(&devc->io_mutex);
-	return ret;
-}
-
-static ssize_t vwsnd_audio_do_write(struct file *file,
-				    const char *buffer,
-				    size_t count,
-				    loff_t *ppos)
-{
-	vwsnd_dev_t *devc = file->private_data;
-	vwsnd_port_t *wport = ((file->f_mode & FMODE_WRITE) ?
-			       &devc->wport : NULL);
-	int ret, nb;
-
-	DBGEV("(file=0x%p, buffer=0x%p, count=%d, ppos=0x%p)\n",
-	      file, buffer, count, ppos);
-
-	if (!wport)
-		return -EINVAL;
-
-	if (wport->swbuf == NULL) {
-		vwsnd_port_t *rport = (file->f_mode & FMODE_READ) ?
-			&devc->rport : NULL;
-		ret = pcm_setup(devc, rport, wport);
-		if (ret < 0)
-			return ret;
-	}
-	if (!access_ok(VERIFY_WRITE, buffer, count))
-		return -EFAULT;
-	ret = 0;
-	while (count) {
-		DECLARE_WAITQUEUE(wait, current);
-		add_wait_queue(&wport->queue, &wait);
-		while ((nb = swb_inc_u(wport, 0)) == 0) {
-			set_current_state(TASK_INTERRUPTIBLE);
-			if (wport->flags & DISABLED ||
-			    file->f_flags & O_NONBLOCK) {
-				current->state = TASK_RUNNING;
-				remove_wait_queue(&wport->queue, &wait);
-				return ret ? ret : -EAGAIN;
-			}
-			schedule();
-			if (signal_pending(current)) {
-				current->state = TASK_RUNNING;
-				remove_wait_queue(&wport->queue, &wait);
-				return ret ? ret : -ERESTARTSYS;
-			}
-		}
-		current->state = TASK_RUNNING;
-		remove_wait_queue(&wport->queue, &wait);
-		/* nb bytes are available in userbuf. */
-		if (nb > count)
-			nb = count;
-		DBGPV("nb = %d\n", nb);
-		if (copy_from_user(wport->swbuf + wport->swb_u_idx, buffer, nb))
-			return -EFAULT;
-		pcm_output(devc, 0, nb);
-		buffer += nb;
-		count -= nb;
-		ret += nb;
-	}
-	DBGPV("returning %d\n", ret);
-	return ret;
-}
-
-static ssize_t vwsnd_audio_write(struct file *file,
-				 const char *buffer,
-				 size_t count,
-				 loff_t *ppos)
-{
-	vwsnd_dev_t *devc = file->private_data;
-	ssize_t ret;
-
-	mutex_lock(&devc->io_mutex);
-	ret = vwsnd_audio_do_write(file, buffer, count, ppos);
-	mutex_unlock(&devc->io_mutex);
-	return ret;
-}
-
-/* No kernel lock - fine */
-static unsigned int vwsnd_audio_poll(struct file *file,
-				     struct poll_table_struct *wait)
-{
-	vwsnd_dev_t *devc = (vwsnd_dev_t *) file->private_data;
-	vwsnd_port_t *rport = (file->f_mode & FMODE_READ) ?
-		&devc->rport : NULL;
-	vwsnd_port_t *wport = (file->f_mode & FMODE_WRITE) ?
-		&devc->wport : NULL;
-	unsigned int mask = 0;
-
-	DBGEV("(file=0x%p, wait=0x%p)\n", file, wait);
-
-	ASSERT(rport || wport);
-	if (rport) {
-		poll_wait(file, &rport->queue, wait);
-		if (swb_inc_u(rport, 0))
-			mask |= (POLLIN | POLLRDNORM);
-	}
-	if (wport) {
-		poll_wait(file, &wport->queue, wait);
-		if (wport->swbuf == NULL || swb_inc_u(wport, 0))
-			mask |= (POLLOUT | POLLWRNORM);
-	}
-
-	DBGPV("returning 0x%x\n", mask);
-	return mask;
-}
-
-static int vwsnd_audio_do_ioctl(struct file *file,
-				unsigned int cmd,
-				unsigned long arg)
-{
-	vwsnd_dev_t *devc = (vwsnd_dev_t *) file->private_data;
-	vwsnd_port_t *rport = (file->f_mode & FMODE_READ) ?
-		&devc->rport : NULL;
-	vwsnd_port_t *wport = (file->f_mode & FMODE_WRITE) ?
-		&devc->wport : NULL;
-	vwsnd_port_t *aport = rport ? rport : wport;
-	struct audio_buf_info buf_info;
-	struct count_info info;
-	unsigned long flags;
-	int ival;
-
-	
-	DBGEV("(file=0x%p, cmd=0x%x, arg=0x%lx)\n",
-	      file, cmd, arg);
-	switch (cmd) {
-	case OSS_GETVERSION:		/* _SIOR ('M', 118, int) */
-		DBGX("OSS_GETVERSION\n");
-		ival = SOUND_VERSION;
-		return put_user(ival, (int *) arg);
-
-	case SNDCTL_DSP_GETCAPS:	/* _SIOR ('P',15, int) */
-		DBGX("SNDCTL_DSP_GETCAPS\n");
-		ival = DSP_CAP_DUPLEX | DSP_CAP_REALTIME | DSP_CAP_TRIGGER;
-		return put_user(ival, (int *) arg);
-
-	case SNDCTL_DSP_GETFMTS:	/* _SIOR ('P',11, int) */
-		DBGX("SNDCTL_DSP_GETFMTS\n");
-		ival = (AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW |
-			AFMT_U8 | AFMT_S8);
-		return put_user(ival, (int *) arg);
-		break;
-
-	case SOUND_PCM_READ_RATE:	/* _SIOR ('P', 2, int) */
-		DBGX("SOUND_PCM_READ_RATE\n");
-		ival = aport->sw_framerate;
-		return put_user(ival, (int *) arg);
-
-	case SOUND_PCM_READ_CHANNELS:	/* _SIOR ('P', 6, int) */
-		DBGX("SOUND_PCM_READ_CHANNELS\n");
-		ival = aport->sw_channels;
-		return put_user(ival, (int *) arg);
-
-	case SNDCTL_DSP_SPEED:		/* _SIOWR('P', 2, int) */
-		if (get_user(ival, (int *) arg))
-			return -EFAULT;
-		DBGX("SNDCTL_DSP_SPEED %d\n", ival);
-		if (ival) {
-			if (aport->swstate != SW_INITIAL) {
-				DBGX("SNDCTL_DSP_SPEED failed: swstate = %d\n",
-				     aport->swstate);
-				return -EINVAL;
-			}
-			if (ival < MIN_SPEED)
-				ival = MIN_SPEED;
-			if (ival > MAX_SPEED)
-				ival = MAX_SPEED;
-			if (rport)
-				rport->sw_framerate = ival;
-			if (wport)
-				wport->sw_framerate = ival;
-		} else
-			ival = aport->sw_framerate;
-		return put_user(ival, (int *) arg);
-
-	case SNDCTL_DSP_STEREO:		/* _SIOWR('P', 3, int) */
-		if (get_user(ival, (int *) arg))
-			return -EFAULT;
-		DBGX("SNDCTL_DSP_STEREO %d\n", ival);
-		if (ival != 0 && ival != 1)
-			return -EINVAL;
-		if (aport->swstate != SW_INITIAL)
-			return -EINVAL;
-		if (rport)
-			rport->sw_channels = ival + 1;
-		if (wport)
-			wport->sw_channels = ival + 1;
-		return put_user(ival, (int *) arg);
-
-	case SNDCTL_DSP_CHANNELS:	/* _SIOWR('P', 6, int) */
-		if (get_user(ival, (int *) arg))
-			return -EFAULT;
-		DBGX("SNDCTL_DSP_CHANNELS %d\n", ival);
-		if (ival != 1 && ival != 2)
-			return -EINVAL;
-		if (aport->swstate != SW_INITIAL)
-			return -EINVAL;
-		if (rport)
-			rport->sw_channels = ival;
-		if (wport)
-			wport->sw_channels = ival;
-		return put_user(ival, (int *) arg);
-
-	case SNDCTL_DSP_GETBLKSIZE:	/* _SIOWR('P', 4, int) */
-		ival = pcm_setup(devc, rport, wport);
-		if (ival < 0) {
-			DBGX("SNDCTL_DSP_GETBLKSIZE failed, errno %d\n", ival);
-			return ival;
-		}
-		ival = 1 << aport->sw_fragshift;
-		DBGX("SNDCTL_DSP_GETBLKSIZE returning %d\n", ival);
-		return put_user(ival, (int *) arg);
-
-	case SNDCTL_DSP_SETFRAGMENT:	/* _SIOWR('P',10, int) */
-		if (get_user(ival, (int *) arg))
-			return -EFAULT;
-		DBGX("SNDCTL_DSP_SETFRAGMENT %d:%d\n",
-		     ival >> 16, ival & 0xFFFF);
-		if (aport->swstate != SW_INITIAL)
-			return -EINVAL;
-		{
-			int sw_fragshift = ival & 0xFFFF;
-			int sw_subdivshift = aport->sw_subdivshift;
-			int hw_fragshift = sw_fragshift - sw_subdivshift;
-			int sw_fragcount = (ival >> 16) & 0xFFFF;
-			int hw_fragsize;
-			if (hw_fragshift < MIN_FRAGSHIFT)
-				hw_fragshift = MIN_FRAGSHIFT;
-			if (hw_fragshift > MAX_FRAGSHIFT)
-				hw_fragshift = MAX_FRAGSHIFT;
-			sw_fragshift = hw_fragshift + aport->sw_subdivshift;
-			hw_fragsize = 1 << hw_fragshift;
-			if (sw_fragcount < MIN_FRAGCOUNT(hw_fragsize))
-				sw_fragcount = MIN_FRAGCOUNT(hw_fragsize);
-			if (sw_fragcount > MAX_FRAGCOUNT(hw_fragsize))
-				sw_fragcount = MAX_FRAGCOUNT(hw_fragsize);
-			DBGPV("sw_fragshift = %d\n", sw_fragshift);
-			DBGPV("rport = 0x%p, wport = 0x%p\n", rport, wport);
-			if (rport) {
-				rport->sw_fragshift = sw_fragshift;
-				rport->sw_fragcount = sw_fragcount;
-			}
-			if (wport) {
-				wport->sw_fragshift = sw_fragshift;
-				wport->sw_fragcount = sw_fragcount;
-			}
-			ival = sw_fragcount << 16 | sw_fragshift;
-		}
-		DBGX("SNDCTL_DSP_SETFRAGMENT returns %d:%d\n",
-		      ival >> 16, ival & 0xFFFF);
-		return put_user(ival, (int *) arg);
-
-	case SNDCTL_DSP_SUBDIVIDE:	/* _SIOWR('P', 9, int) */
-                if (get_user(ival, (int *) arg))
-			return -EFAULT;
-		DBGX("SNDCTL_DSP_SUBDIVIDE %d\n", ival);
-		if (aport->swstate != SW_INITIAL)
-			return -EINVAL;
-		{
-			int subdivshift;
-			int hw_fragshift, hw_fragsize, hw_fragcount;
-			switch (ival) {
-			case 1: subdivshift = 0; break;
-			case 2: subdivshift = 1; break;
-			case 4: subdivshift = 2; break;
-			default: return -EINVAL;
-			}
-			hw_fragshift = aport->sw_fragshift - subdivshift;
-			if (hw_fragshift < MIN_FRAGSHIFT ||
-			    hw_fragshift > MAX_FRAGSHIFT)
-				return -EINVAL;
-			hw_fragsize = 1 << hw_fragshift;
-			hw_fragcount = aport->sw_fragcount >> subdivshift;
-			if (hw_fragcount < MIN_FRAGCOUNT(hw_fragsize) ||
-			    hw_fragcount > MAX_FRAGCOUNT(hw_fragsize))
-				return -EINVAL;
-			if (rport)
-				rport->sw_subdivshift = subdivshift;
-			if (wport)
-				wport->sw_subdivshift = subdivshift;
-		}
-		return 0;
-
-	case SNDCTL_DSP_SETFMT:		/* _SIOWR('P',5, int) */
-		if (get_user(ival, (int *) arg))
-			return -EFAULT;
-		DBGX("SNDCTL_DSP_SETFMT %d\n", ival);
-		if (ival != AFMT_QUERY) {
-			if (aport->swstate != SW_INITIAL) {
-				DBGP("SETFMT failed, swstate = %d\n",
-				     aport->swstate);
-				return -EINVAL;
-			}
-			switch (ival) {
-			case AFMT_MU_LAW:
-			case AFMT_A_LAW:
-			case AFMT_U8:
-			case AFMT_S8:
-			case AFMT_S16_LE:
-				if (rport)
-					rport->sw_samplefmt = ival;
-				if (wport)
-					wport->sw_samplefmt = ival;
-				break;
-			default:
-				return -EINVAL;
-			}
-		}
-		ival = aport->sw_samplefmt;
-		return put_user(ival, (int *) arg);
-
-	case SNDCTL_DSP_GETOSPACE:	/* _SIOR ('P',12, audio_buf_info) */
-		DBGXV("SNDCTL_DSP_GETOSPACE\n");
-		if (!wport)
-			return -EINVAL;
-		ival = pcm_setup(devc, rport, wport);
-		if (ival < 0)
-			return ival;
-		ival = swb_inc_u(wport, 0);
-		buf_info.fragments = ival >> wport->sw_fragshift;
-		buf_info.fragstotal = wport->sw_fragcount;
-		buf_info.fragsize = 1 << wport->sw_fragshift;
-		buf_info.bytes = ival;
-		DBGXV("SNDCTL_DSP_GETOSPACE returns { %d %d %d %d }\n",
-		     buf_info.fragments, buf_info.fragstotal,
-		     buf_info.fragsize, buf_info.bytes);
-		if (copy_to_user((void *) arg, &buf_info, sizeof buf_info))
-			return -EFAULT;
-		return 0;
-
-	case SNDCTL_DSP_GETISPACE:	/* _SIOR ('P',13, audio_buf_info) */
-		DBGX("SNDCTL_DSP_GETISPACE\n");
-		if (!rport)
-			return -EINVAL;
-		ival = pcm_setup(devc, rport, wport);
-		if (ival < 0)
-			return ival;
-		ival = swb_inc_u(rport, 0);
-		buf_info.fragments = ival >> rport->sw_fragshift;
-		buf_info.fragstotal = rport->sw_fragcount;
-		buf_info.fragsize = 1 << rport->sw_fragshift;
-		buf_info.bytes = ival;
-		DBGX("SNDCTL_DSP_GETISPACE returns { %d %d %d %d }\n",
-		     buf_info.fragments, buf_info.fragstotal,
-		     buf_info.fragsize, buf_info.bytes);
-		if (copy_to_user((void *) arg, &buf_info, sizeof buf_info))
-			return -EFAULT;
-		return 0;
-
-	case SNDCTL_DSP_NONBLOCK:	/* _SIO  ('P',14) */
-		DBGX("SNDCTL_DSP_NONBLOCK\n");
-		spin_lock(&file->f_lock);
-		file->f_flags |= O_NONBLOCK;
-		spin_unlock(&file->f_lock);
-		return 0;
-
-	case SNDCTL_DSP_RESET:		/* _SIO  ('P', 0) */
-		DBGX("SNDCTL_DSP_RESET\n");
-		/*
-		 * Nothing special needs to be done for input.  Input
-		 * samples sit in swbuf, but it will be reinitialized
-		 * to empty when pcm_setup() is called.
-		 */
-		if (wport && wport->swbuf) {
-			wport->swstate = SW_INITIAL;
-			pcm_output(devc, 0, 0);
-			pcm_write_sync(devc);
-		}
-		pcm_shutdown(devc, rport, wport);
-		return 0;
-
-	case SNDCTL_DSP_SYNC:		/* _SIO  ('P', 1) */
-		DBGX("SNDCTL_DSP_SYNC\n");
-		if (wport) {
-			pcm_flush_frag(devc);
-			pcm_write_sync(devc);
-		}
-		pcm_shutdown(devc, rport, wport);
-		return 0;
-
-	case SNDCTL_DSP_POST:		/* _SIO  ('P', 8) */
-		DBGX("SNDCTL_DSP_POST\n");
-		if (!wport)
-			return -EINVAL;
-		pcm_flush_frag(devc);
-		return 0;
-
-	case SNDCTL_DSP_GETIPTR:	/* _SIOR ('P', 17, count_info) */
-		DBGX("SNDCTL_DSP_GETIPTR\n");
-		if (!rport)
-			return -EINVAL;
-		spin_lock_irqsave(&rport->lock, flags);
-		{
-			ustmsc_t ustmsc;
-			if (rport->hwstate == HW_RUNNING) {
-				ASSERT(rport->swstate == SW_RUN);
-				li_read_USTMSC(&rport->chan, &ustmsc);
-				info.bytes = ustmsc.msc - rport->MSC_offset;
-				info.bytes *= rport->frame_size;
-			} else {
-				info.bytes = rport->byte_count;
-			}
-			info.blocks = rport->frag_count;
-			info.ptr = 0;	/* not implemented */
-			rport->frag_count = 0;
-		}
-		spin_unlock_irqrestore(&rport->lock, flags);
-		if (copy_to_user((void *) arg, &info, sizeof info))
-			return -EFAULT;
-		return 0;
-
-	case SNDCTL_DSP_GETOPTR:	/* _SIOR ('P',18, count_info) */
-		DBGX("SNDCTL_DSP_GETOPTR\n");
-		if (!wport)
-			return -EINVAL;
-		spin_lock_irqsave(&wport->lock, flags);
-		{
-			ustmsc_t ustmsc;
-			if (wport->hwstate == HW_RUNNING) {
-				ASSERT(wport->swstate == SW_RUN);
-				li_read_USTMSC(&wport->chan, &ustmsc);
-				info.bytes = ustmsc.msc - wport->MSC_offset;
-				info.bytes *= wport->frame_size;
-			} else {
-				info.bytes = wport->byte_count;
-			}
-			info.blocks = wport->frag_count;
-			info.ptr = 0;	/* not implemented */
-			wport->frag_count = 0;
-		}
-		spin_unlock_irqrestore(&wport->lock, flags);
-		if (copy_to_user((void *) arg, &info, sizeof info))
-			return -EFAULT;
-		return 0;
-
-	case SNDCTL_DSP_GETODELAY:	/* _SIOR ('P', 23, int) */
-		DBGX("SNDCTL_DSP_GETODELAY\n");
-		if (!wport)
-			return -EINVAL;
-		spin_lock_irqsave(&wport->lock, flags);
-		{
-			int fsize = wport->frame_size;
-			ival = wport->swb_i_avail / fsize;
-			if (wport->hwstate == HW_RUNNING) {
-				int swptr, hwptr, hwframes, hwbytes, hwsize;
-				int totalhwbytes;
-				ustmsc_t ustmsc;
-
-				hwsize = wport->hwbuf_size;
-				swptr = li_read_swptr(&wport->chan);
-				li_read_USTMSC(&wport->chan, &ustmsc);
-				hwframes = ustmsc.msc - wport->MSC_offset;
-				totalhwbytes = hwframes * fsize;
-				hwptr = totalhwbytes % hwsize;
-				hwbytes = (swptr - hwptr + hwsize) % hwsize;
-				ival += hwbytes / fsize;
-			}
-		}
-		spin_unlock_irqrestore(&wport->lock, flags);
-		return put_user(ival, (int *) arg);
-
-	case SNDCTL_DSP_PROFILE:	/* _SIOW ('P', 23, int) */
-		DBGX("SNDCTL_DSP_PROFILE\n");
-
-		/*
-		 * Thomas Sailer explains SNDCTL_DSP_PROFILE
-		 * (private email, March 24, 1999):
-		 *
-		 *     This gives the sound driver a hint on what it
-		 *     should do with partial fragments
-		 *     (i.e. fragments partially filled with write).
-		 *     This can direct the driver to zero them or
-		 *     leave them alone.  But don't ask me what this
-		 *     is good for, my driver just zeroes the last
-		 *     fragment before the receiver stops, no idea
-		 *     what good for any other behaviour could
-		 *     be. Implementing it as NOP seems safe.
-		 */
-
-		break;
-
-	case SNDCTL_DSP_GETTRIGGER:	/* _SIOR ('P',16, int) */
-		DBGX("SNDCTL_DSP_GETTRIGGER\n");
-		ival = 0;
-		if (rport) {
-			spin_lock_irqsave(&rport->lock, flags);
-			{
-				if (!(rport->flags & DISABLED))
-					ival |= PCM_ENABLE_INPUT;
-			}
-			spin_unlock_irqrestore(&rport->lock, flags);
-		}
-		if (wport) {
-			spin_lock_irqsave(&wport->lock, flags);
-			{
-				if (!(wport->flags & DISABLED))
-					ival |= PCM_ENABLE_OUTPUT;
-			}
-			spin_unlock_irqrestore(&wport->lock, flags);
-		}
-		return put_user(ival, (int *) arg);
-
-	case SNDCTL_DSP_SETTRIGGER:	/* _SIOW ('P',16, int) */
-		if (get_user(ival, (int *) arg))
-			return -EFAULT;
-		DBGX("SNDCTL_DSP_SETTRIGGER %d\n", ival);
-
-		/*
-		 * If user is disabling I/O and port is not in initial
-		 * state, fail with EINVAL.
-		 */
-
-		if (((rport && !(ival & PCM_ENABLE_INPUT)) ||
-		     (wport && !(ival & PCM_ENABLE_OUTPUT))) &&
-		    aport->swstate != SW_INITIAL)
-			return -EINVAL;
-
-		if (rport) {
-			vwsnd_port_hwstate_t hwstate;
-			spin_lock_irqsave(&rport->lock, flags);
-			{
-				hwstate = rport->hwstate;
-				if (ival & PCM_ENABLE_INPUT)
-					rport->flags &= ~DISABLED;
-				else
-					rport->flags |= DISABLED;
-			}
-			spin_unlock_irqrestore(&rport->lock, flags);
-			if (hwstate != HW_RUNNING && ival & PCM_ENABLE_INPUT) {
-
-				if (rport->swstate == SW_INITIAL)
-					pcm_setup(devc, rport, wport);
-				else
-					li_activate_dma(&rport->chan);
-			}
-		}
-		if (wport) {
-			vwsnd_port_flags_t pflags;
-			spin_lock_irqsave(&wport->lock, flags);
-			{
-				pflags = wport->flags;
-				if (ival & PCM_ENABLE_OUTPUT)
-					wport->flags &= ~DISABLED;
-				else
-					wport->flags |= DISABLED;
-			}
-			spin_unlock_irqrestore(&wport->lock, flags);
-			if (pflags & DISABLED && ival & PCM_ENABLE_OUTPUT) {
-				if (wport->swstate == SW_RUN)
-					pcm_output(devc, 0, 0);
-			}
-		}
-		return 0;
-
-	default:
-		DBGP("unknown ioctl 0x%x\n", cmd);
-		return -EINVAL;
-	}
-	DBGP("unimplemented ioctl 0x%x\n", cmd);
-	return -EINVAL;
-}
-
-static long vwsnd_audio_ioctl(struct file *file,
-				unsigned int cmd,
-				unsigned long arg)
-{
-	vwsnd_dev_t *devc = (vwsnd_dev_t *) file->private_data;
-	int ret;
-
-	mutex_lock(&vwsnd_mutex);
-	mutex_lock(&devc->io_mutex);
-	ret = vwsnd_audio_do_ioctl(file, cmd, arg);
-	mutex_unlock(&devc->io_mutex);
-	mutex_unlock(&vwsnd_mutex);
-
-	return ret;
-}
-
-/* No mmap. */
-
-static int vwsnd_audio_mmap(struct file *file, struct vm_area_struct *vma)
-{
-	DBGE("(file=0x%p, vma=0x%p)\n", file, vma);
-	return -ENODEV;
-}
-
-/*
- * Open the audio device for read and/or write.
- *
- * Returns 0 on success, -errno on failure.
- */
-
-static int vwsnd_audio_open(struct inode *inode, struct file *file)
-{
-	vwsnd_dev_t *devc;
-	int minor = iminor(inode);
-	int sw_samplefmt;
-	DEFINE_WAIT(wait);
-
-	DBGE("(inode=0x%p, file=0x%p)\n", inode, file);
-
-	mutex_lock(&vwsnd_mutex);
-	INC_USE_COUNT;
-	for (devc = vwsnd_dev_list; devc; devc = devc->next_dev)
-		if ((devc->audio_minor & ~0x0F) == (minor & ~0x0F))
-			break;
-
-	if (devc == NULL) {
-		DEC_USE_COUNT;
-		mutex_unlock(&vwsnd_mutex);
-		return -ENODEV;
-	}
-
-	mutex_lock(&devc->open_mutex);
-	while (1) {
-		prepare_to_wait(&devc->open_wait, &wait, TASK_INTERRUPTIBLE);
-		if (!(devc->open_mode & file->f_mode))
-			break;
-
-		mutex_unlock(&devc->open_mutex);
-		mutex_unlock(&vwsnd_mutex);
-		if (file->f_flags & O_NONBLOCK) {
-			DEC_USE_COUNT;
-			return -EBUSY;
-		}
-		schedule();
-		if (signal_pending(current)) {
-			DEC_USE_COUNT;
-			return -ERESTARTSYS;
-		}
-		mutex_lock(&vwsnd_mutex);
-		mutex_lock(&devc->open_mutex);
-	}
-	finish_wait(&devc->open_wait, &wait);
-	devc->open_mode |= file->f_mode & (FMODE_READ | FMODE_WRITE);
-	mutex_unlock(&devc->open_mutex);
-
-	/* get default sample format from minor number. */
-
-	sw_samplefmt = 0;
-	if ((minor & 0xF) == SND_DEV_DSP)
-		sw_samplefmt = AFMT_U8;
-	else if ((minor & 0xF) == SND_DEV_AUDIO)
-		sw_samplefmt = AFMT_MU_LAW;
-	else if ((minor & 0xF) == SND_DEV_DSP16)
-		sw_samplefmt = AFMT_S16_LE;
-	else
-		ASSERT(0);
-
-	/* Initialize vwsnd_ports. */
-
-	mutex_lock(&devc->io_mutex);
-	{
-		if (file->f_mode & FMODE_READ) {
-			devc->rport.swstate        = SW_INITIAL;
-			devc->rport.flags          = 0;
-			devc->rport.sw_channels    = 1;
-			devc->rport.sw_samplefmt   = sw_samplefmt;
-			devc->rport.sw_framerate   = 8000;
-			devc->rport.sw_fragshift   = DEFAULT_FRAGSHIFT;
-			devc->rport.sw_fragcount   = DEFAULT_FRAGCOUNT;
-			devc->rport.sw_subdivshift = DEFAULT_SUBDIVSHIFT;
-			devc->rport.byte_count     = 0;
-			devc->rport.frag_count     = 0;
-		}
-		if (file->f_mode & FMODE_WRITE) {
-			devc->wport.swstate        = SW_INITIAL;
-			devc->wport.flags          = 0;
-			devc->wport.sw_channels    = 1;
-			devc->wport.sw_samplefmt   = sw_samplefmt;
-			devc->wport.sw_framerate   = 8000;
-			devc->wport.sw_fragshift   = DEFAULT_FRAGSHIFT;
-			devc->wport.sw_fragcount   = DEFAULT_FRAGCOUNT;
-			devc->wport.sw_subdivshift = DEFAULT_SUBDIVSHIFT;
-			devc->wport.byte_count     = 0;
-			devc->wport.frag_count     = 0;
-		}
-	}
-	mutex_unlock(&devc->io_mutex);
-
-	file->private_data = devc;
-	DBGRV();
-	mutex_unlock(&vwsnd_mutex);
-	return 0;
-}
-
-/*
- * Release (close) the audio device.
- */
-
-static int vwsnd_audio_release(struct inode *inode, struct file *file)
-{
-	vwsnd_dev_t *devc = (vwsnd_dev_t *) file->private_data;
-	vwsnd_port_t *wport = NULL, *rport = NULL;
-	int err = 0;
-
-	mutex_lock(&vwsnd_mutex);
-	mutex_lock(&devc->io_mutex);
-	{
-		DBGEV("(inode=0x%p, file=0x%p)\n", inode, file);
-
-		if (file->f_mode & FMODE_READ)
-			rport = &devc->rport;
-		if (file->f_mode & FMODE_WRITE) {
-			wport = &devc->wport;
-			pcm_flush_frag(devc);
-			pcm_write_sync(devc);
-		}
-		pcm_shutdown(devc, rport, wport);
-		if (rport)
-			rport->swstate = SW_OFF;
-		if (wport)
-			wport->swstate = SW_OFF;
-	}
-	mutex_unlock(&devc->io_mutex);
-
-	mutex_lock(&devc->open_mutex);
-	{
-		devc->open_mode &= ~file->f_mode;
-	}
-	mutex_unlock(&devc->open_mutex);
-	wake_up(&devc->open_wait);
-	DEC_USE_COUNT;
-	DBGR();
-	mutex_unlock(&vwsnd_mutex);
-	return err;
-}
-
-static const struct file_operations vwsnd_audio_fops = {
-	.owner =	THIS_MODULE,
-	.llseek =	no_llseek,
-	.read =		vwsnd_audio_read,
-	.write =	vwsnd_audio_write,
-	.poll =		vwsnd_audio_poll,
-	.unlocked_ioctl = vwsnd_audio_ioctl,
-	.mmap =		vwsnd_audio_mmap,
-	.open =		vwsnd_audio_open,
-	.release =	vwsnd_audio_release,
-};
-
-/*****************************************************************************/
-/* mixer driver */
-
-/* open the mixer device. */
-
-static int vwsnd_mixer_open(struct inode *inode, struct file *file)
-{
-	vwsnd_dev_t *devc;
-
-	DBGEV("(inode=0x%p, file=0x%p)\n", inode, file);
-
-	INC_USE_COUNT;
-	mutex_lock(&vwsnd_mutex);
-	for (devc = vwsnd_dev_list; devc; devc = devc->next_dev)
-		if (devc->mixer_minor == iminor(inode))
-			break;
-
-	if (devc == NULL) {
-		DEC_USE_COUNT;
-		mutex_unlock(&vwsnd_mutex);
-		return -ENODEV;
-	}
-	file->private_data = devc;
-	mutex_unlock(&vwsnd_mutex);
-	return 0;
-}
-
-/* release (close) the mixer device. */
-
-static int vwsnd_mixer_release(struct inode *inode, struct file *file)
-{
-	DBGEV("(inode=0x%p, file=0x%p)\n", inode, file);
-	DEC_USE_COUNT;
-	return 0;
-}
-
-/* mixer_read_ioctl handles all read ioctls on the mixer device. */
-
-static int mixer_read_ioctl(vwsnd_dev_t *devc, unsigned int nr, void __user *arg)
-{
-	int val = -1;
-
-	DBGEV("(devc=0x%p, nr=0x%x, arg=0x%p)\n", devc, nr, arg);
-
-	switch (nr) {
-	case SOUND_MIXER_CAPS:
-		val = SOUND_CAP_EXCL_INPUT;
-		break;
-
-	case SOUND_MIXER_DEVMASK:
-		val = (SOUND_MASK_PCM | SOUND_MASK_LINE |
-		       SOUND_MASK_MIC | SOUND_MASK_CD | SOUND_MASK_RECLEV);
-		break;
-
-	case SOUND_MIXER_STEREODEVS:
-		val = (SOUND_MASK_PCM | SOUND_MASK_LINE |
-		       SOUND_MASK_MIC | SOUND_MASK_CD | SOUND_MASK_RECLEV);
-		break;
-
-	case SOUND_MIXER_OUTMASK:
-		val = (SOUND_MASK_PCM | SOUND_MASK_LINE |
-		       SOUND_MASK_MIC | SOUND_MASK_CD);
-		break;
-
-	case SOUND_MIXER_RECMASK:
-		val = (SOUND_MASK_PCM | SOUND_MASK_LINE |
-		       SOUND_MASK_MIC | SOUND_MASK_CD);
-		break;
-
-	case SOUND_MIXER_PCM:
-		val = ad1843_get_gain(&devc->lith, &ad1843_gain_PCM);
-		break;
-
-	case SOUND_MIXER_LINE:
-		val = ad1843_get_gain(&devc->lith, &ad1843_gain_LINE);
-		break;
-
-	case SOUND_MIXER_MIC:
-		val = ad1843_get_gain(&devc->lith, &ad1843_gain_MIC);
-		break;
-
-	case SOUND_MIXER_CD:
-		val = ad1843_get_gain(&devc->lith, &ad1843_gain_CD);
-		break;
-
-	case SOUND_MIXER_RECLEV:
-		val = ad1843_get_gain(&devc->lith, &ad1843_gain_RECLEV);
-		break;
-
-	case SOUND_MIXER_RECSRC:
-		val = ad1843_get_recsrc(&devc->lith);
-		break;
-
-	case SOUND_MIXER_OUTSRC:
-		val = ad1843_get_outsrc(&devc->lith);
-		break;
-
-	default:
-		return -EINVAL;
-	}
-	return put_user(val, (int __user *) arg);
-}
-
-/* mixer_write_ioctl handles all write ioctls on the mixer device. */
-
-static int mixer_write_ioctl(vwsnd_dev_t *devc, unsigned int nr, void __user *arg)
-{
-	int val;
-	int err;
-
-	DBGEV("(devc=0x%p, nr=0x%x, arg=0x%p)\n", devc, nr, arg);
-
-	err = get_user(val, (int __user *) arg);
-	if (err)
-		return -EFAULT;
-	switch (nr) {
-	case SOUND_MIXER_PCM:
-		val = ad1843_set_gain(&devc->lith, &ad1843_gain_PCM, val);
-		break;
-
-	case SOUND_MIXER_LINE:
-		val = ad1843_set_gain(&devc->lith, &ad1843_gain_LINE, val);
-		break;
-
-	case SOUND_MIXER_MIC:
-		val = ad1843_set_gain(&devc->lith, &ad1843_gain_MIC, val);
-		break;
-
-	case SOUND_MIXER_CD:
-		val = ad1843_set_gain(&devc->lith, &ad1843_gain_CD, val);
-		break;
-
-	case SOUND_MIXER_RECLEV:
-		val = ad1843_set_gain(&devc->lith, &ad1843_gain_RECLEV, val);
-		break;
-
-	case SOUND_MIXER_RECSRC:
-		if (devc->rport.swbuf || devc->wport.swbuf)
-			return -EBUSY;	/* can't change recsrc while running */
-		val = ad1843_set_recsrc(&devc->lith, val);
-		break;
-
-	case SOUND_MIXER_OUTSRC:
-		val = ad1843_set_outsrc(&devc->lith, val);
-		break;
-
-	default:
-		return -EINVAL;
-	}
-	if (val < 0)
-		return val;
-	return put_user(val, (int __user *) arg);
-}
-
-/* This is the ioctl entry to the mixer driver. */
-
-static long vwsnd_mixer_ioctl(struct file *file,
-			      unsigned int cmd,
-			      unsigned long arg)
-{
-	vwsnd_dev_t *devc = (vwsnd_dev_t *) file->private_data;
-	const unsigned int nrmask = _IOC_NRMASK << _IOC_NRSHIFT;
-	const unsigned int nr = (cmd & nrmask) >> _IOC_NRSHIFT;
-	int retval;
-
-	DBGEV("(devc=0x%p, cmd=0x%x, arg=0x%lx)\n", devc, cmd, arg);
-
-	mutex_lock(&vwsnd_mutex);
-	mutex_lock(&devc->mix_mutex);
-	{
-		if ((cmd & ~nrmask) == MIXER_READ(0))
-			retval = mixer_read_ioctl(devc, nr, (void __user *) arg);
-		else if ((cmd & ~nrmask) == MIXER_WRITE(0))
-			retval = mixer_write_ioctl(devc, nr, (void __user *) arg);
-		else
-			retval = -EINVAL;
-	}
-	mutex_unlock(&devc->mix_mutex);
-	mutex_unlock(&vwsnd_mutex);
-	return retval;
-}
-
-static const struct file_operations vwsnd_mixer_fops = {
-	.owner =	THIS_MODULE,
-	.llseek =	no_llseek,
-	.unlocked_ioctl = vwsnd_mixer_ioctl,
-	.open =		vwsnd_mixer_open,
-	.release =	vwsnd_mixer_release,
-};
-
-/*****************************************************************************/
-/* probe/attach/unload */
-
-/* driver probe routine.  Return nonzero if hardware is found. */
-
-static int __init probe_vwsnd(struct address_info *hw_config)
-{
-	lithium_t lith;
-	int w;
-	unsigned long later;
-
-	DBGEV("(hw_config=0x%p)\n", hw_config);
-
-	/* XXX verify lithium present (to prevent crash on non-vw) */
-
-	if (li_create(&lith, hw_config->io_base) != 0) {
-		printk(KERN_WARNING "probe_vwsnd: can't map lithium\n");
-		return 0;
-	}
-	later = jiffies + 2;
-	li_writel(&lith, LI_HOST_CONTROLLER, LI_HC_LINK_ENABLE);
-	do {
-		w = li_readl(&lith, LI_HOST_CONTROLLER);
-	} while (w == LI_HC_LINK_ENABLE && time_before(jiffies, later));
-	
-	li_destroy(&lith);
-
-	DBGPV("HC = 0x%04x\n", w);
-
-	if ((w == LI_HC_LINK_ENABLE) || (w & LI_HC_LINK_CODEC)) {
-
-		/* This may indicate a beta machine with no audio,
-		 * or a future machine with different audio.
-		 * On beta-release 320 w/ no audio, HC == 0x4000 */
-
-		printk(KERN_WARNING "probe_vwsnd: audio codec not found\n");
-		return 0;
-	}
-
-	if (w & LI_HC_LINK_FAILURE) {
-		printk(KERN_WARNING "probe_vwsnd: can't init audio codec\n");
-		return 0;
-	}
-
-	printk(KERN_INFO "vwsnd: lithium audio at mmio %#x irq %d\n",
-		hw_config->io_base, hw_config->irq);
-
-	return 1;
-}
-
-/*
- * driver attach routine.  Initialize driver data structures and
- * initialize hardware.  A new vwsnd_dev_t is allocated and put
- * onto the global list, vwsnd_dev_list.
- *
- * Return +minor_dev on success, -errno on failure.
- */
-
-static int __init attach_vwsnd(struct address_info *hw_config)
-{
-	vwsnd_dev_t *devc = NULL;
-	int err = -ENOMEM;
-
-	DBGEV("(hw_config=0x%p)\n", hw_config);
-
-	devc = kmalloc(sizeof (vwsnd_dev_t), GFP_KERNEL);
-	if (devc == NULL)
-		goto fail0;
-
-	err = li_create(&devc->lith, hw_config->io_base);
-	if (err)
-		goto fail1;
-
-	init_waitqueue_head(&devc->open_wait);
-
-	devc->rport.hwbuf_size = HWBUF_SIZE;
-	devc->rport.hwbuf_vaddr = __get_free_pages(GFP_KERNEL, HWBUF_ORDER);
-	if (!devc->rport.hwbuf_vaddr)
-		goto fail2;
-	devc->rport.hwbuf = (void *) devc->rport.hwbuf_vaddr;
-	devc->rport.hwbuf_paddr = virt_to_phys(devc->rport.hwbuf);
-
-	/*
-	 * Quote from the NT driver:
-	 *
-	 * // WARNING!!! HACK to setup output dma!!!
-	 * // This is required because even on output there is some data
-	 * // trickling into the input DMA channel.  This is a bug in the
-	 * // Lithium microcode.
-	 * // --sde
-	 *
-	 * We set the input side's DMA base address here.  It will remain
-	 * valid until the driver is unloaded.
-	 */
-
-	li_writel(&devc->lith, LI_COMM1_BASE,
-		  devc->rport.hwbuf_paddr >> 8 | 1 << (37 - 8));
-
-	devc->wport.hwbuf_size = HWBUF_SIZE;
-	devc->wport.hwbuf_vaddr = __get_free_pages(GFP_KERNEL, HWBUF_ORDER);
-	if (!devc->wport.hwbuf_vaddr)
-		goto fail3;
-	devc->wport.hwbuf = (void *) devc->wport.hwbuf_vaddr;
-	devc->wport.hwbuf_paddr = virt_to_phys(devc->wport.hwbuf);
-	DBGP("wport hwbuf = 0x%p\n", devc->wport.hwbuf);
-
-	DBGDO(shut_up++);
-	err = ad1843_init(&devc->lith);
-	DBGDO(shut_up--);
-	if (err)
-		goto fail4;
-
-	/* install interrupt handler */
-
-	err = request_irq(hw_config->irq, vwsnd_audio_intr, 0, "vwsnd", devc);
-	if (err)
-		goto fail5;
-
-	/* register this device's drivers. */
-
-	devc->audio_minor = register_sound_dsp(&vwsnd_audio_fops, -1);
-	if ((err = devc->audio_minor) < 0) {
-		DBGDO(printk(KERN_WARNING
-			     "attach_vwsnd: register_sound_dsp error %d\n",
-			     err));
-		goto fail6;
-	}
-	devc->mixer_minor = register_sound_mixer(&vwsnd_mixer_fops,
-						 devc->audio_minor >> 4);
-	if ((err = devc->mixer_minor) < 0) {
-		DBGDO(printk(KERN_WARNING
-			     "attach_vwsnd: register_sound_mixer error %d\n",
-			     err));
-		goto fail7;
-	}
-
-	/* Squirrel away device indices for unload routine. */
-
-	hw_config->slots[0] = devc->audio_minor;
-
-	/* Initialize as much of *devc as possible */
-
-	mutex_init(&devc->open_mutex);
-	mutex_init(&devc->io_mutex);
-	mutex_init(&devc->mix_mutex);
-	devc->open_mode = 0;
-	spin_lock_init(&devc->rport.lock);
-	init_waitqueue_head(&devc->rport.queue);
-	devc->rport.swstate = SW_OFF;
-	devc->rport.hwstate = HW_STOPPED;
-	devc->rport.flags = 0;
-	devc->rport.swbuf = NULL;
-	spin_lock_init(&devc->wport.lock);
-	init_waitqueue_head(&devc->wport.queue);
-	devc->wport.swstate = SW_OFF;
-	devc->wport.hwstate = HW_STOPPED;
-	devc->wport.flags = 0;
-	devc->wport.swbuf = NULL;
-
-	/* Success.  Link us onto the local device list. */
-
-	devc->next_dev = vwsnd_dev_list;
-	vwsnd_dev_list = devc;
-	return devc->audio_minor;
-
-	/* So many ways to fail.  Undo what we did. */
-
- fail7:
-	unregister_sound_dsp(devc->audio_minor);
- fail6:
-	free_irq(hw_config->irq, devc);
- fail5:
- fail4:
-	free_pages(devc->wport.hwbuf_vaddr, HWBUF_ORDER);
- fail3:
-	free_pages(devc->rport.hwbuf_vaddr, HWBUF_ORDER);
- fail2:
-	li_destroy(&devc->lith);
- fail1:
-	kfree(devc);
- fail0:
-	return err;
-}
-
-static int __exit unload_vwsnd(struct address_info *hw_config)
-{
-	vwsnd_dev_t *devc, **devcp;
-
-	DBGE("()\n");
-
-	devcp = &vwsnd_dev_list;
-	while ((devc = *devcp)) {
-		if (devc->audio_minor == hw_config->slots[0]) {
-			*devcp = devc->next_dev;
-			break;
-		}
-		devcp = &devc->next_dev;
-	}
-
-	if (!devc)
-		return -ENODEV;
-
-	unregister_sound_mixer(devc->mixer_minor);
-	unregister_sound_dsp(devc->audio_minor);
-	free_irq(hw_config->irq, devc);
-	free_pages(devc->wport.hwbuf_vaddr, HWBUF_ORDER);
-	free_pages(devc->rport.hwbuf_vaddr, HWBUF_ORDER);
-	li_destroy(&devc->lith);
-	kfree(devc);
-
-	return 0;
-}
-
-/*****************************************************************************/
-/* initialization and loadable kernel module interface */
-
-static struct address_info the_hw_config = {
-	0xFF001000,			/* lithium phys addr  */
-	CO_IRQ(CO_APIC_LI_AUDIO)	/* irq */
-};
-
-MODULE_DESCRIPTION("SGI Visual Workstation sound module");
-MODULE_AUTHOR("Bob Miller <kbob@xxxxxxx>");
-MODULE_LICENSE("GPL");
-
-static int __init init_vwsnd(void)
-{
-	int err;
-
-	DBGXV("\n");
-	DBGXV("sound::vwsnd::init_module()\n");
-
-	if (!probe_vwsnd(&the_hw_config))
-		return -ENODEV;
-
-	err = attach_vwsnd(&the_hw_config);
-	if (err < 0)
-		return err;
-	return 0;
-}
-
-static void __exit cleanup_vwsnd(void)
-{
-	DBGX("sound::vwsnd::cleanup_module()\n");
-
-	unload_vwsnd(&the_hw_config);
-}
-
-module_init(init_vwsnd);
-module_exit(cleanup_vwsnd);
--
To unsubscribe from this list: send the line "unsubscribe linux-tip-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Stable Commits]     [Linux Stable Kernel]     [Linux Kernel]     [Linux USB Devel]     [Linux Video &Media]     [Linux Audio Users]     [Yosemite News]     [Linux SCSI]

  Powered by Linux