Commit-ID: ab0e08f15d23628dd8d50bf6ce1a935a8840c7dc
Gitweb: http://git.kernel.org/tip/ab0e08f15d23628dd8d50bf6ce1a935a8840c7dc
Author: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
AuthorDate: Wed, 18 May 2011 21:33:43 +0000
Committer: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
CommitDate: Thu, 19 May 2011 14:24:16 +0200
x86: hpet: Cleanup the clockevents init and register code
No need to recalculate the frequency and the conversion factors over
and over. Calculate the frequency once and use the new config/register
interface and let the core code do the math.
Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: John Stultz <john.stultz@xxxxxxxxxx>
Reviewed-by: Ingo Molnar <mingo@xxxxxxx>
Link: http://lkml.kernel.org/r/%3C20110518210136.646482357%40linutronix.de%3E
---
arch/x86/kernel/hpet.c | 72 ++++++++++-------------------------------------
1 files changed, 16 insertions(+), 56 deletions(-)
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index bfe8f72..6781765 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -217,7 +217,7 @@ static void hpet_reserve_platform_timers(unsigned int id) { }
/*
* Common hpet info
*/
-static unsigned long hpet_period;
+static unsigned long hpet_freq;
static void hpet_legacy_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt);
@@ -232,7 +232,6 @@ static struct clock_event_device hpet_clockevent = {
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.set_mode = hpet_legacy_set_mode,
.set_next_event = hpet_legacy_next_event,
- .shift = 32,
.irq = 0,
.rating = 50,
};
@@ -290,28 +289,12 @@ static void hpet_legacy_clockevent_register(void)
hpet_enable_legacy_int();
/*
- * The mult factor is defined as (include/linux/clockchips.h)
- * mult/2^shift = cyc/ns (in contrast to ns/cyc in clocksource.h)
- * hpet_period is in units of femtoseconds (per cycle), so
- * mult/2^shift = cyc/ns = 10^6/hpet_period
- * mult = (10^6 * 2^shift)/hpet_period
- * mult = (FSEC_PER_NSEC << hpet_clockevent.shift)/hpet_period
- */
- hpet_clockevent.mult = div_sc((unsigned long) FSEC_PER_NSEC,
- hpet_period, hpet_clockevent.shift);
- /* Calculate the min / max delta */
- hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF,
- &hpet_clockevent);
- /* Setup minimum reprogramming delta. */
- hpet_clockevent.min_delta_ns = clockevent_delta2ns(HPET_MIN_PROG_DELTA,
- &hpet_clockevent);
-
- /*
* Start hpet with the boot cpu mask and make it
* global after the IO_APIC has been initialized.
*/
hpet_clockevent.cpumask = cpumask_of(smp_processor_id());
- clockevents_register_device(&hpet_clockevent);
+ clockevents_config_and_register(&hpet_clockevent, hpet_freq,
+ HPET_MIN_PROG_DELTA, 0x7FFFFFFF);
global_clock_event = &hpet_clockevent;
printk(KERN_DEBUG "hpet clockevent registered\n");
}
@@ -549,7 +532,6 @@ static int hpet_setup_irq(struct hpet_dev *dev)
static void init_one_hpet_msi_clockevent(struct hpet_dev *hdev, int cpu)
{
struct clock_event_device *evt = &hdev->evt;
- uint64_t hpet_freq;
WARN_ON(cpu != smp_processor_id());
if (!(hdev->flags & HPET_DEV_VALID))
@@ -571,24 +553,10 @@ static void init_one_hpet_msi_clockevent(struct hpet_dev *hdev, int cpu)
evt->set_mode = hpet_msi_set_mode;
evt->set_next_event = hpet_msi_next_event;
- evt->shift = 32;
-
- /*
- * The period is a femto seconds value. We need to calculate the
- * scaled math multiplication factor for nanosecond to hpet tick
- * conversion.
- */
- hpet_freq = FSEC_PER_SEC;
- do_div(hpet_freq, hpet_period);
- evt->mult = div_sc((unsigned long) hpet_freq,
- NSEC_PER_SEC, evt->shift);
- /* Calculate the max delta */
- evt->max_delta_ns = clockevent_delta2ns(0x7FFFFFFF, evt);
- /* 5 usec minimum reprogramming delta. */
- evt->min_delta_ns = 5000;
-
evt->cpumask = cpumask_of(hdev->cpu);
- clockevents_register_device(evt);
+
+ clockevents_config_and_register(evt, hpet_freq, HPET_MIN_PROG_DELTA,
+ 0x7FFFFFFF);
}
#ifdef CONFIG_HPET
@@ -792,7 +760,6 @@ static struct clocksource clocksource_hpet = {
static int hpet_clocksource_register(void)
{
u64 start, now;
- u64 hpet_freq;
cycle_t t1;
/* Start the counter */
@@ -819,24 +786,7 @@ static int hpet_clocksource_register(void)
return -ENODEV;
}
- /*
- * The definition of mult is (include/linux/clocksource.h)
- * mult/2^shift = ns/cyc and hpet_period is in units of fsec/cyc
- * so we first need to convert hpet_period to ns/cyc units:
- * mult/2^shift = ns/cyc = hpet_period/10^6
- * mult = (hpet_period * 2^shift)/10^6
- * mult = (hpet_period << shift)/FSEC_PER_NSEC
- */
-
- /* Need to convert hpet_period (fsec/cyc) to cyc/sec:
- *
- * cyc/sec = FSEC_PER_SEC/hpet_period(fsec/cyc)
- * cyc/sec = (FSEC_PER_NSEC * NSEC_PER_SEC)/hpet_period
- */
- hpet_freq = FSEC_PER_SEC;
- do_div(hpet_freq, hpet_period);
clocksource_register_hz(&clocksource_hpet, (u32)hpet_freq);
-
return 0;
}
@@ -845,7 +795,9 @@ static int hpet_clocksource_register(void)
*/
int __init hpet_enable(void)
{
+ unsigned long hpet_period;
unsigned int id;
+ u64 freq;
int i;
if (!is_hpet_capable())
@@ -884,6 +836,14 @@ int __init hpet_enable(void)
goto out_nohpet;
/*
+ * The period is a femto seconds value. Convert it to a
+ * frequency.
+ */
+ freq = FSEC_PER_SEC;
+ do_div(freq, hpet_period);
+ hpet_freq = freq;
+
+ /*
* Read the HPET ID register to retrieve the IRQ routing
* information and the number of channels
*/
--
To unsubscribe from this list: send the line "unsubscribe linux-tip-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
|