Commit-ID: 798778b8653f64b7b2162ac70eca10367cff6ce8
Gitweb: http://git.kernel.org/tip/798778b8653f64b7b2162ac70eca10367cff6ce8
Author: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
AuthorDate: Sun, 8 May 2011 19:03:03 +0100
Committer: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
CommitDate: Sat, 14 May 2011 10:29:48 +0100
clocksource: convert mips to generic i8253 clocksource
Convert MIPS i8253 clocksource code to use generic i8253 clocksource.
Acked-by: John Stultz <john.stultz@xxxxxxxxxx>
Acked-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
---
arch/mips/Kconfig | 1 +
arch/mips/include/asm/i8253.h | 5 +++
arch/mips/kernel/i8253.c | 78 +----------------------------------------
3 files changed, 7 insertions(+), 77 deletions(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 8e256cc..f7f6419 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -2339,6 +2339,7 @@ config MMU
config I8253
bool
+ select CLKSRC_I8253
select MIPS_EXTERNAL_TIMER
config ZONE_DMA32
diff --git a/arch/mips/include/asm/i8253.h b/arch/mips/include/asm/i8253.h
index 48bb823..9ad0113 100644
--- a/arch/mips/include/asm/i8253.h
+++ b/arch/mips/include/asm/i8253.h
@@ -12,8 +12,13 @@
#define PIT_CH0 0x40
#define PIT_CH2 0x42
+#define PIT_LATCH LATCH
+
extern raw_spinlock_t i8253_lock;
extern void setup_pit_timer(void);
+#define inb_pit inb_p
+#define outb_pit outb_p
+
#endif /* __ASM_I8253_H */
diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c
index 2392a7a2..391221b 100644
--- a/arch/mips/kernel/i8253.c
+++ b/arch/mips/kernel/i8253.c
@@ -125,87 +125,11 @@ void __init setup_pit_timer(void)
setup_irq(0, &irq0);
}
-/*
- * Since the PIT overflows every tick, its not very useful
- * to just read by itself. So use jiffies to emulate a free
- * running counter:
- */
-static cycle_t pit_read(struct clocksource *cs)
-{
- unsigned long flags;
- int count;
- u32 jifs;
- static int old_count;
- static u32 old_jifs;
-
- raw_spin_lock_irqsave(&i8253_lock, flags);
- /*
- * Although our caller may have the read side of xtime_lock,
- * this is now a seqlock, and we are cheating in this routine
- * by having side effects on state that we cannot undo if
- * there is a collision on the seqlock and our caller has to
- * retry. (Namely, old_jifs and old_count.) So we must treat
- * jiffies as volatile despite the lock. We read jiffies
- * before latching the timer count to guarantee that although
- * the jiffies value might be older than the count (that is,
- * the counter may underflow between the last point where
- * jiffies was incremented and the point where we latch the
- * count), it cannot be newer.
- */
- jifs = jiffies;
- outb_p(0x00, PIT_MODE); /* latch the count ASAP */
- count = inb_p(PIT_CH0); /* read the latched count */
- count |= inb_p(PIT_CH0) << 8;
-
- /* VIA686a test code... reset the latch if count > max + 1 */
- if (count > LATCH) {
- outb_p(0x34, PIT_MODE);
- outb_p(LATCH & 0xff, PIT_CH0);
- outb(LATCH >> 8, PIT_CH0);
- count = LATCH - 1;
- }
-
- /*
- * It's possible for count to appear to go the wrong way for a
- * couple of reasons:
- *
- * 1. The timer counter underflows, but we haven't handled the
- * resulting interrupt and incremented jiffies yet.
- * 2. Hardware problem with the timer, not giving us continuous time,
- * the counter does small "jumps" upwards on some Pentium systems,
- * (see c't 95/10 page 335 for Neptun bug.)
- *
- * Previous attempts to handle these cases intelligently were
- * buggy, so we just do the simple thing now.
- */
- if (count > old_count && jifs == old_jifs) {
- count = old_count;
- }
- old_count = count;
- old_jifs = jifs;
-
- raw_spin_unlock_irqrestore(&i8253_lock, flags);
-
- count = (LATCH - 1) - count;
-
- return (cycle_t)(jifs * LATCH) + count;
-}
-
-static struct clocksource clocksource_pit = {
- .name = "pit",
- .rating = 110,
- .read = pit_read,
- .mask = CLOCKSOURCE_MASK(32),
- .mult = 0,
- .shift = 20,
-};
-
static int __init init_pit_clocksource(void)
{
if (num_possible_cpus() > 1) /* PIT does not scale! */
return 0;
- clocksource_pit.mult = clocksource_hz2mult(CLOCK_TICK_RATE, 20);
- return clocksource_register(&clocksource_pit);
+ return clocksource_i8253_init();
}
arch_initcall(init_pit_clocksource);
--
To unsubscribe from this list: send the line "unsubscribe linux-tip-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
|