Commit-ID: a65d086235208a3b3546e209d2210048549099b2
Gitweb: http://git.kernel.org/tip/a65d086235208a3b3546e209d2210048549099b2
Author: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
AuthorDate: Wed, 8 Apr 2009 12:31:23 +0200
Committer: H. Peter Anvin <hpa@xxxxxxxxx>
CommitDate: Thu, 28 May 2009 09:24:10 -0700
x86, mce: unify Intel thermal init
Mechanic unification. No change in code.
[ Impact: cleanup, 32-bit / 64-bit unification ]
Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Signed-off-by: Ingo Molnar <mingo@xxxxxxx>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@xxxxxxxxxxxxxx>
Signed-off-by: H. Peter Anvin <hpa@xxxxxxxxx>
---
arch/x86/kernel/cpu/mcheck/Makefile | 3 +-
arch/x86/kernel/cpu/mcheck/mce.h | 11 ++++
arch/x86/kernel/cpu/mcheck/mce_intel.c | 73 +++++++++++++++++++++++++++++
arch/x86/kernel/cpu/mcheck/mce_intel_64.c | 61 +-----------------------
arch/x86/kernel/cpu/mcheck/p4.c | 59 +-----------------------
5 files changed, 89 insertions(+), 118 deletions(-)
diff --git a/arch/x86/kernel/cpu/mcheck/Makefile b/arch/x86/kernel/cpu/mcheck/Makefile
index b2f8982..6def769 100644
--- a/arch/x86/kernel/cpu/mcheck/Makefile
+++ b/arch/x86/kernel/cpu/mcheck/Makefile
@@ -1,7 +1,8 @@
obj-y = mce_$(BITS).o therm_throt.o
obj-$(CONFIG_X86_32) += k7.o p4.o p5.o p6.o winchip.o
-obj-$(CONFIG_X86_MCE_INTEL) += mce_intel_64.o
+obj-$(CONFIG_X86_MCE_P4THERMAL) += mce_intel.o
+obj-$(CONFIG_X86_MCE_INTEL) += mce_intel_64.o mce_intel.o
obj-$(CONFIG_X86_MCE_AMD) += mce_amd_64.o
obj-$(CONFIG_X86_MCE_NONFATAL) += non-fatal.o
obj-$(CONFIG_X86_MCE_THRESHOLD) += threshold.o
diff --git a/arch/x86/kernel/cpu/mcheck/mce.h b/arch/x86/kernel/cpu/mcheck/mce.h
index ae9f628..2d1a54b 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.h
+++ b/arch/x86/kernel/cpu/mcheck/mce.h
@@ -1,6 +1,8 @@
#include <linux/init.h>
#include <asm/mce.h>
+#ifdef CONFIG_X86_32
+
void amd_mcheck_init(struct cpuinfo_x86 *c);
void intel_p4_mcheck_init(struct cpuinfo_x86 *c);
void intel_p5_mcheck_init(struct cpuinfo_x86 *c);
@@ -12,3 +14,12 @@ extern void (*machine_check_vector)(struct pt_regs *, long error_code);
extern int nr_mce_banks;
+void intel_set_thermal_handler(void);
+
+#else
+
+static inline void intel_set_thermal_handler(void) { }
+
+#endif
+
+void intel_init_thermal(struct cpuinfo_x86 *c);
diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel.c b/arch/x86/kernel/cpu/mcheck/mce_intel.c
new file mode 100644
index 0000000..bad3cbb
--- /dev/null
+++ b/arch/x86/kernel/cpu/mcheck/mce_intel.c
@@ -0,0 +1,73 @@
+/*
+ * Common code for Intel machine checks
+ */
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+
+#include <asm/therm_throt.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/apic.h>
+#include <asm/msr.h>
+
+#include "mce.h"
+
+void intel_init_thermal(struct cpuinfo_x86 *c)
+{
+ unsigned int cpu = smp_processor_id();
+ int tm2 = 0;
+ u32 l, h;
+
+ /* Thermal monitoring depends on ACPI and clock modulation*/
+ if (!cpu_has(c, X86_FEATURE_ACPI) || !cpu_has(c, X86_FEATURE_ACC))
+ return;
+
+ /*
+ * First check if its enabled already, in which case there might
+ * be some SMM goo which handles it, so we can't even put a handler
+ * since it might be delivered via SMI already:
+ */
+ rdmsr(MSR_IA32_MISC_ENABLE, l, h);
+ h = apic_read(APIC_LVTTHMR);
+ if ((l & (1 << 3)) && (h & APIC_DM_SMI)) {
+ printk(KERN_DEBUG
+ "CPU%d: Thermal monitoring handled by SMI\n", cpu);
+ return;
+ }
+
+ if (cpu_has(c, X86_FEATURE_TM2) && (l & (1 << 13)))
+ tm2 = 1;
+
+ /* Check whether a vector already exists */
+ if (h & APIC_VECTOR_MASK) {
+ printk(KERN_DEBUG
+ "CPU%d: Thermal LVT vector (%#x) already installed\n",
+ cpu, (h & APIC_VECTOR_MASK));
+ return;
+ }
+
+ /* We'll mask the thermal vector in the lapic till we're ready: */
+ h = THERMAL_APIC_VECTOR | APIC_DM_FIXED | APIC_LVT_MASKED;
+ apic_write(APIC_LVTTHMR, h);
+
+ rdmsr(MSR_IA32_THERM_INTERRUPT, l, h);
+ wrmsr(MSR_IA32_THERM_INTERRUPT, l | 0x03, h);
+
+ intel_set_thermal_handler();
+
+ rdmsr(MSR_IA32_MISC_ENABLE, l, h);
+ wrmsr(MSR_IA32_MISC_ENABLE, l | (1 << 3), h);
+
+ /* Unmask the thermal vector: */
+ l = apic_read(APIC_LVTTHMR);
+ apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
+
+ printk(KERN_INFO "CPU%d: Thermal monitoring enabled (%s)\n",
+ cpu, tm2 ? "TM2" : "TM1");
+
+ /* enable thermal throttle processing */
+ atomic_set(&therm_throt_en, 1);
+}
diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
index b85d0c1..38f9632 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
@@ -17,6 +17,8 @@
#include <asm/therm_throt.h>
#include <asm/apic.h>
+#include "mce.h"
+
asmlinkage void smp_thermal_interrupt(void)
{
__u64 msr_val;
@@ -34,65 +36,6 @@ asmlinkage void smp_thermal_interrupt(void)
irq_exit();
}
-static inline void intel_set_thermal_handler(void) { }
-
-static void intel_init_thermal(struct cpuinfo_x86 *c)
-{
- unsigned int cpu = smp_processor_id();
- int tm2 = 0;
- u32 l, h;
-
- /* Thermal monitoring depends on ACPI and clock modulation*/
- if (!cpu_has(c, X86_FEATURE_ACPI) || !cpu_has(c, X86_FEATURE_ACC))
- return;
-
- /*
- * First check if its enabled already, in which case there might
- * be some SMM goo which handles it, so we can't even put a handler
- * since it might be delivered via SMI already:
- */
- rdmsr(MSR_IA32_MISC_ENABLE, l, h);
- h = apic_read(APIC_LVTTHMR);
- if ((l & MSR_IA32_MISC_ENABLE_TM1) && (h & APIC_DM_SMI)) {
- printk(KERN_DEBUG
- "CPU%d: Thermal monitoring handled by SMI\n", cpu);
- return;
- }
-
- if (cpu_has(c, X86_FEATURE_TM2) && (l & MSR_IA32_MISC_ENABLE_TM2))
- tm2 = 1;
-
- /* Check whether a vector already exists */
- if (h & APIC_VECTOR_MASK) {
- printk(KERN_DEBUG
- "CPU%d: Thermal LVT vector (%#x) already installed\n",
- cpu, (h & APIC_VECTOR_MASK));
- return;
- }
-
- /* We'll mask the thermal vector in the lapic till we're ready: */
- h = THERMAL_APIC_VECTOR | APIC_DM_FIXED | APIC_LVT_MASKED;
- apic_write(APIC_LVTTHMR, h);
-
- rdmsr(MSR_IA32_THERM_INTERRUPT, l, h);
- wrmsr(MSR_IA32_THERM_INTERRUPT, l | 0x03, h);
-
- intel_set_thermal_handler();
-
- rdmsr(MSR_IA32_MISC_ENABLE, l, h);
- wrmsr(MSR_IA32_MISC_ENABLE, l | MSR_IA32_MISC_ENABLE_TM1, h);
-
- /* Unmask the thermal vector: */
- l = apic_read(APIC_LVTTHMR);
- apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
-
- printk(KERN_INFO "CPU%d: Thermal monitoring enabled (%s)\n",
- cpu, tm2 ? "TM2" : "TM1");
-
- /* enable thermal throttle processing */
- atomic_set(&therm_throt_en, 1);
-}
-
/*
* Support for Intel Correct Machine Check Interrupts. This allows
* the CPU to raise an interrupt when a corrected machine check happened.
diff --git a/arch/x86/kernel/cpu/mcheck/p4.c b/arch/x86/kernel/cpu/mcheck/p4.c
index f70753a..f979ffe 100644
--- a/arch/x86/kernel/cpu/mcheck/p4.c
+++ b/arch/x86/kernel/cpu/mcheck/p4.c
@@ -66,68 +66,11 @@ void smp_thermal_interrupt(struct pt_regs *regs)
irq_exit();
}
-static void intel_set_thermal_handler(void)
+void intel_set_thermal_handler(void)
{
vendor_thermal_interrupt = intel_thermal_interrupt;
}
-/* P4/Xeon Thermal regulation detect and init: */
-static void intel_init_thermal(struct cpuinfo_x86 *c)
-{
- unsigned int cpu = smp_processor_id();
- int tm2 = 0;
- u32 l, h;
-
- /* Thermal monitoring depends on ACPI and clock modulation*/
- if (!cpu_has(c, X86_FEATURE_ACPI) || !cpu_has(c, X86_FEATURE_ACC))
- return;
-
- /*
- * First check if its enabled already, in which case there might
- * be some SMM goo which handles it, so we can't even put a handler
- * since it might be delivered via SMI already:
- */
- rdmsr(MSR_IA32_MISC_ENABLE, l, h);
- h = apic_read(APIC_LVTTHMR);
- if ((l & MSR_IA32_MISC_ENABLE_TM1) && (h & APIC_DM_SMI)) {
- printk(KERN_DEBUG
- "CPU%d: Thermal monitoring handled by SMI\n", cpu);
- return;
- }
-
- if (cpu_has(c, X86_FEATURE_TM2) && (l & MSR_IA32_MISC_ENABLE_TM2))
- tm2 = 1;
-
- /* Check whether a vector already exists */
- if (h & APIC_VECTOR_MASK) {
- printk(KERN_DEBUG
- "CPU%d: Thermal LVT vector (%#x) already installed\n",
- cpu, (h & APIC_VECTOR_MASK));
- return;
- }
-
- /* We'll mask the thermal vector in the lapic till we're ready: */
- h = THERMAL_APIC_VECTOR | APIC_DM_FIXED | APIC_LVT_MASKED;
- apic_write(APIC_LVTTHMR, h);
-
- rdmsr(MSR_IA32_THERM_INTERRUPT, l, h);
- wrmsr(MSR_IA32_THERM_INTERRUPT, l | 0x03, h);
-
- intel_set_thermal_handler();
-
- rdmsr(MSR_IA32_MISC_ENABLE, l, h);
- wrmsr(MSR_IA32_MISC_ENABLE, l | MSR_IA32_MISC_ENABLE_TM1, h);
-
- /* Unmask the thermal vector: */
- l = apic_read(APIC_LVTTHMR);
- apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
-
- printk(KERN_INFO "CPU%d: Thermal monitoring enabled (%s)\n",
- cpu, tm2 ? "TM2" : "TM1");
-
- /* enable thermal throttle processing */
- atomic_set(&therm_throt_en, 1);
-}
#endif /* CONFIG_X86_MCE_P4THERMAL */
/* P4/Xeon Extended MCE MSR retrieval, return 0 if unsupported */
--
To unsubscribe from this list: send the line "unsubscribe linux-tip-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
|