Commit-ID: 7a6f9cbb37120c745fc187083fb5c3de4dca4f97
Gitweb: http://git.kernel.org/tip/7a6f9cbb37120c745fc187083fb5c3de4dca4f97
Author: Andreas Herrmann <andreas.herrmann3@xxxxxxx>
AuthorDate: Tue, 21 Apr 2009 20:00:37 +0200
Committer: Ingo Molnar <mingo@xxxxxxx>
CommitDate: Wed, 22 Apr 2009 15:53:40 +0200
x86: hpet: fix periodic mode programming on AMD 81xx
(See http://bugzilla.kernel.org/show_bug.cgi?id=12961)
It partially reverts commit c23e253e67c9d8a91a0ffa33c1f571a17f0a2403
(x86: hpet: stop HPET_COUNTER when programming periodic mode)
HPET on AMD 81xx chipset needs a second write (with HPET_TN_SETVAL
cleared) to T0_CMP register to set the period in periodic mode.
With this patch HPET_COUNTER is still stopped but not reset when HPET
is programmed in periodic mode. This should help to avoid races when
HPET is programmed in periodic mode and fixes a boot time hang that
I've observed on a machine when using 1000HZ.
[ Impact: fix boot time hang on machines with AMD 81xx chipset ]
Reported-by: Jeff Mahoney <jeffm@xxxxxxxx>
Signed-off-by: Andreas Herrmann <andreas.herrmann3@xxxxxxx>
Tested-by: Jeff Mahoney <jeffm@xxxxxxxx>
LKML-Reference: <20090421180037.GA2763@xxxxxxxxxxxxxxxx>
Signed-off-by: Ingo Molnar <mingo@xxxxxxx>
---
arch/x86/kernel/hpet.c | 18 +++++++++++++++++-
1 files changed, 17 insertions(+), 1 deletions(-)
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 3f0019e..81408b9 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -236,6 +236,10 @@ static void hpet_stop_counter(void)
unsigned long cfg = hpet_readl(HPET_CFG);
cfg &= ~HPET_CFG_ENABLE;
hpet_writel(cfg, HPET_CFG);
+}
+
+static void hpet_reset_counter(void)
+{
hpet_writel(0, HPET_COUNTER);
hpet_writel(0, HPET_COUNTER + 4);
}
@@ -250,6 +254,7 @@ static void hpet_start_counter(void)
static void hpet_restart_counter(void)
{
hpet_stop_counter();
+ hpet_reset_counter();
hpet_start_counter();
}
@@ -309,7 +314,7 @@ static int hpet_setup_msi_irq(unsigned int irq);
static void hpet_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt, int timer)
{
- unsigned long cfg;
+ unsigned long cfg, cmp, now;
uint64_t delta;
switch (mode) {
@@ -317,12 +322,23 @@ static void hpet_set_mode(enum clock_event_mode mode,
hpet_stop_counter();
delta = ((uint64_t)(NSEC_PER_SEC/HZ)) * evt->mult;
delta >>= evt->shift;
+ now = hpet_readl(HPET_COUNTER);
+ cmp = now + (unsigned long) delta;
cfg = hpet_readl(HPET_Tn_CFG(timer));
/* Make sure we use edge triggered interrupts */
cfg &= ~HPET_TN_LEVEL;
cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC |
HPET_TN_SETVAL | HPET_TN_32BIT;
hpet_writel(cfg, HPET_Tn_CFG(timer));
+ hpet_writel(cmp, HPET_Tn_CMP(timer));
+ udelay(1);
+ /*
+ * HPET on AMD 81xx needs a second write (with HPET_TN_SETVAL
+ * cleared) to T0_CMP to set the period. The HPET_TN_SETVAL
+ * bit is automatically cleared after the first write.
+ * (See AMD-8111 HyperTransport I/O Hub Data Sheet,
+ * Publication # 24674)
+ */
hpet_writel((unsigned long) delta, HPET_Tn_CMP(timer));
hpet_start_counter();
hpet_print_config();
--
To unsubscribe from this list: send the line "unsubscribe linux-tip-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
|