For SMBUS block read, do not continue to read if the message length passed from the device is '0' or greater than the maximum allowed bytes. Signed-off-by: Akhil R <akhilrajeev@xxxxxxxxxx> --- v1->v2: Add check for the maximum data as well. drivers/i2c/busses/i2c-tegra.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index 87976e99e6d0..049b4d154c23 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -1395,6 +1395,11 @@ static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], ret = tegra_i2c_xfer_msg(i2c_dev, &msgs[i], MSG_END_CONTINUE); if (ret) break; + + /* Validate message length before proceeding */ + if (msgs[i].buf[0] == 0 || msgs[i].buf[0] > I2C_SMBUS_BLOCK_MAX) + break; + /* Set the msg length from first byte */ msgs[i].len += msgs[i].buf[0]; dev_dbg(i2c_dev->dev, "reading %d bytes\n", msgs[i].len); -- 2.43.2
