Use the dev_err_probe() helper to simplify error handling during probe. This also handle scenario, when EDEFER is returned and useless error is printed. Signed-off-by: Jinjie Ruan <ruanjinjie@xxxxxxxxxx> --- drivers/soc/fsl/qe/tsa.c | 62 +++++++++++++++------------------------- 1 file changed, 23 insertions(+), 39 deletions(-) diff --git a/drivers/soc/fsl/qe/tsa.c b/drivers/soc/fsl/qe/tsa.c index 7fa399b7a47c..fc37d23b746d 100644 --- a/drivers/soc/fsl/qe/tsa.c +++ b/drivers/soc/fsl/qe/tsa.c @@ -453,10 +453,8 @@ static int tsa_of_parse_tdms(struct tsa *tsa, struct device_node *np) for_each_available_child_of_node_scoped(np, tdm_np) { ret = of_property_read_u32(tdm_np, "reg", &tdm_id); - if (ret) { - dev_err(tsa->dev, "%pOF: failed to read reg\n", tdm_np); - return ret; - } + if (ret) + return dev_err_probe(tsa->dev, ret, "%pOF: failed to read reg\n", tdm_np); switch (tdm_id) { case 0: tsa->tdms |= BIT(TSA_TDMA); @@ -465,18 +463,15 @@ static int tsa_of_parse_tdms(struct tsa *tsa, struct device_node *np) tsa->tdms |= BIT(TSA_TDMB); break; default: - dev_err(tsa->dev, "%pOF: Invalid tdm_id (%u)\n", tdm_np, - tdm_id); - return -EINVAL; + return dev_err_probe(tsa->dev, -EINVAL, "%pOF: Invalid tdm_id (%u)\n", + tdm_np, tdm_id); } } for_each_available_child_of_node_scoped(np, tdm_np) { ret = of_property_read_u32(tdm_np, "reg", &tdm_id); - if (ret) { - dev_err(tsa->dev, "%pOF: failed to read reg\n", tdm_np); - return ret; - } + if (ret) + return dev_err_probe(tsa->dev, ret, "%pOF: failed to read reg\n", tdm_np); tdm = &tsa->tdm[tdm_id]; tdm->simode_tdm = TSA_SIMODE_TDM_SDM_NORM; @@ -484,35 +479,26 @@ static int tsa_of_parse_tdms(struct tsa *tsa, struct device_node *np) val = 0; ret = of_property_read_u32(tdm_np, "fsl,rx-frame-sync-delay-bits", &val); - if (ret && ret != -EINVAL) { - dev_err(tsa->dev, - "%pOF: failed to read fsl,rx-frame-sync-delay-bits\n", - tdm_np); - return ret; - } - if (val > 3) { - dev_err(tsa->dev, - "%pOF: Invalid fsl,rx-frame-sync-delay-bits (%u)\n", - tdm_np, val); - return -EINVAL; - } + if (ret && ret != -EINVAL) + return dev_err_probe(tsa->dev, ret, + "%pOF: failed to read fsl,rx-frame-sync-delay-bits\n", + tdm_np); + if (val > 3) + return dev_err_probe(tsa->dev, -EINVAL, + "%pOF: Invalid fsl,rx-frame-sync-delay-bits (%u)\n", + tdm_np, val); tdm->simode_tdm |= TSA_SIMODE_TDM_RFSD(val); val = 0; ret = of_property_read_u32(tdm_np, "fsl,tx-frame-sync-delay-bits", &val); - if (ret && ret != -EINVAL) { - dev_err(tsa->dev, - "%pOF: failed to read fsl,tx-frame-sync-delay-bits\n", - tdm_np); - return ret; - } - if (val > 3) { - dev_err(tsa->dev, - "%pOF: Invalid fsl,tx-frame-sync-delay-bits (%u)\n", - tdm_np, val); - return -EINVAL; - } + if (ret && ret != -EINVAL) + return dev_err_probe(tsa->dev, ret, + "%pOF: failed to read fsl,tx-frame-sync-delay-bits\n", tdm_np); + if (val > 3) + return dev_err_probe(tsa->dev, -EINVAL, + "%pOF: Invalid fsl,tx-frame-sync-delay-bits (%u)\n", + tdm_np, val); tdm->simode_tdm |= TSA_SIMODE_TDM_TFSD(val); if (of_property_read_bool(tdm_np, "fsl,common-rxtx-pins")) @@ -645,10 +631,8 @@ static int tsa_probe(struct platform_device *pdev) return PTR_ERR(tsa->si_regs); res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "si_ram"); - if (!res) { - dev_err(tsa->dev, "si_ram resource missing\n"); - return -EINVAL; - } + if (!res) + return dev_err_probe(tsa->dev, -EINVAL, "si_ram resource missing\n"); tsa->si_ram_sz = resource_size(res); tsa->si_ram = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(tsa->si_ram)) -- 2.34.1