On Wed, Mar 20, 2024 at 10:13:18PM +0530, Sumit Gupta wrote:
>
>
> On 12/03/24 14:04, Beata Michalska wrote:
> > External email: Use caution opening links or attachments
> >
> >
> > With the Frequency Invariance Engine (FIE) being already wired up with
> > sched tick and making use of relevant (core counter and constant
> > counter) AMU counters, getting the current frequency for a given CPU
> > on supported platforms can be achieved by utilizing the frequency scale
> > factor which reflects an average CPU frequency for the last tick period
> > length.
> >
> > The solution is partially based on APERF/MPERF implementation of
> > arch_freq_get_on_cpu.
> >
> > Suggested-by: Ionela Voinescu <ionela.voinescu@xxxxxxx>
> > Signed-off-by: Beata Michalska <beata.michalska@xxxxxxx>
> > ---
> > arch/arm64/kernel/topology.c | 103 +++++++++++++++++++++++++++++++----
> > 1 file changed, 92 insertions(+), 11 deletions(-)
> >
> > diff --git a/arch/arm64/kernel/topology.c b/arch/arm64/kernel/topology.c
> > index 1a2c72f3e7f8..42cb19c31719 100644
> > --- a/arch/arm64/kernel/topology.c
> > +++ b/arch/arm64/kernel/topology.c
> > @@ -17,6 +17,8 @@
> > #include <linux/cpufreq.h>
> > #include <linux/init.h>
> > #include <linux/percpu.h>
> > +#include <linux/sched/isolation.h>
> > +#include <linux/seqlock_types.h>
> >
> > #include <asm/cpu.h>
> > #include <asm/cputype.h>
> > @@ -88,18 +90,31 @@ int __init parse_acpi_topology(void)
> > * initialized.
> > */
> > static DEFINE_PER_CPU_READ_MOSTLY(unsigned long, arch_max_freq_scale) = 1UL << (2 * SCHED_CAPACITY_SHIFT);
> > -static DEFINE_PER_CPU(u64, arch_const_cycles_prev);
> > -static DEFINE_PER_CPU(u64, arch_core_cycles_prev);
> > static cpumask_var_t amu_fie_cpus;
> >
> > +struct amu_cntr_sample {
> > + u64 arch_const_cycles_prev;
> > + u64 arch_core_cycles_prev;
> > + unsigned long last_update;
> > + seqcount_t seq;
> > +};
> > +
> > +static DEFINE_PER_CPU_SHARED_ALIGNED(struct amu_cntr_sample, cpu_amu_samples) = {
> > + .seq = SEQCNT_ZERO(cpu_amu_samples.seq)
> > +};
> > +
> > void update_freq_counters_refs(void)
> > {
> > - this_cpu_write(arch_core_cycles_prev, read_corecnt());
> > - this_cpu_write(arch_const_cycles_prev, read_constcnt());
> > + struct amu_cntr_sample *amu_sample = this_cpu_ptr(&cpu_amu_samples);
> > +
> > + amu_sample->arch_core_cycles_prev = read_corecnt();
> > + amu_sample->arch_const_cycles_prev = read_constcnt();
> > }
> >
> > static inline bool freq_counters_valid(int cpu)
> > {
> > + struct amu_cntr_sample *amu_sample = per_cpu_ptr(&cpu_amu_samples, cpu);
> > +
> > if ((cpu >= nr_cpu_ids) || !cpumask_test_cpu(cpu, cpu_present_mask))
> > return false;
> >
> > @@ -108,8 +123,8 @@ static inline bool freq_counters_valid(int cpu)
> > return false;
> > }
> >
> > - if (unlikely(!per_cpu(arch_const_cycles_prev, cpu) ||
> > - !per_cpu(arch_core_cycles_prev, cpu))) {
> > + if (unlikely(!amu_sample->arch_const_cycles_prev ||
> > + !amu_sample->arch_core_cycles_prev)) {
> > pr_debug("CPU%d: cycle counters are not enabled.\n", cpu);
> > return false;
> > }
> > @@ -152,20 +167,27 @@ void freq_inv_set_max_ratio(int cpu, u64 max_rate)
> >
> > static void amu_scale_freq_tick(void)
> > {
> > + struct amu_cntr_sample *amu_sample = this_cpu_ptr(&cpu_amu_samples);
> > u64 prev_core_cnt, prev_const_cnt;
> > u64 core_cnt, const_cnt, scale;
> >
> > - prev_const_cnt = this_cpu_read(arch_const_cycles_prev);
> > - prev_core_cnt = this_cpu_read(arch_core_cycles_prev);
> > + prev_const_cnt = amu_sample->arch_const_cycles_prev;
> > + prev_core_cnt = amu_sample->arch_core_cycles_prev;
> > +
> > + write_seqcount_begin(&amu_sample->seq);
> >
> > update_freq_counters_refs();
> >
> > - const_cnt = this_cpu_read(arch_const_cycles_prev);
> > - core_cnt = this_cpu_read(arch_core_cycles_prev);
> > + const_cnt = amu_sample->arch_const_cycles_prev;
> > + core_cnt = amu_sample->arch_core_cycles_prev;
> >
> > + /*
> > + * This should not happen unless the AMUs have been reset and the
> > + * counter values have not been resroted - unlikely
> > + */
> > if (unlikely(core_cnt <= prev_core_cnt ||
> > const_cnt <= prev_const_cnt))
> > - return;
> > + goto leave;
> >
> > /*
> > * /\core arch_max_freq_scale
> > @@ -182,6 +204,10 @@ static void amu_scale_freq_tick(void)
> >
> > scale = min_t(unsigned long, scale, SCHED_CAPACITY_SCALE);
> > this_cpu_write(arch_freq_scale, (unsigned long)scale);
> > +
> > + amu_sample->last_update = jiffies;
> > +leave:
> > + write_seqcount_end(&amu_sample->seq);
> > }
> >
> > static struct scale_freq_data amu_sfd = {
> > @@ -189,6 +215,61 @@ static struct scale_freq_data amu_sfd = {
> > .set_freq_scale = amu_scale_freq_tick,
> > };
> >
> > +#define AMU_SAMPLE_EXP_MS 20
> > +
> > +unsigned int arch_freq_get_on_cpu(int cpu)
> > +{
> > + struct amu_cntr_sample *amu_sample;
> > + unsigned long last_update;
> > + unsigned int seq;
> > + unsigned int freq;
> > + u64 scale;
> > +
> > + if (!cpumask_test_cpu(cpu, amu_fie_cpus) || !arch_scale_freq_ref(cpu))
> > + return 0;
> > +
> > +retry:
> > + amu_sample = per_cpu_ptr(&cpu_amu_samples, cpu);
> > +
> > + do {
> > + seq = raw_read_seqcount_begin(&amu_sample->seq);
> > + last_update = amu_sample->last_update;
> > + } while (read_seqcount_retry(&amu_sample->seq, seq));
> > +
> > + /*
> > + * For those CPUs that are in full dynticks mode,
> > + * and those that have not seen tick for a while
> > + * try an alternative source for the counters (and thus freq scale),
> > + * if available for given policy
> > + */
> > + if (time_is_before_jiffies(last_update + msecs_to_jiffies(AMU_SAMPLE_EXP_MS))) {
> > + struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
> > + int ref_cpu = nr_cpu_ids;
> > +
> > + if (cpumask_intersects(housekeeping_cpumask(HK_TYPE_TICK),
> > + policy->cpus))
> > + ref_cpu = cpumask_nth_and(cpu, policy->cpus,
> > + housekeeping_cpumask(HK_TYPE_TICK));
> > +
>
> This is looking for any other HK CPU within same policy for counters.
> AFAIU, cpumask_nth_and() will return small_cpumask_bits/nr_cpu_ids
> if the number of bits in both masks is different. Could you check
> again if the current change is fine or needs something like below.
> BTW, we have one CPU per policy.
>
> cpumask_and(&mask, policy->cpus, housekeeping_cpumask(HK_TYPE_TICK));
> retry:
> ....
> cpumask_andnot(&mask, &mask, cpumask_of(cpu));
> ref_cpu = cpumask_any(&mask);
>
At this point this is indeed bogus though for a different reason.
I've rewritten that part a bit, though still, this will bail out for single-cpu
policies.
---
BR
Beata
> Thank you,
> Sumit Gupta
>
> > + cpufreq_cpu_put(policy);
> > + if (ref_cpu >= nr_cpu_ids || ref_cpu == cpu)
> > + /* No alternative to pull info from */
> > + return 0;
> > + cpu = ref_cpu;
> > + goto retry;
> > + }
> > + /*
> > + * Reversed computation to the one used to determine
> > + * the arch_freq_scale value
> > + * (see amu_scale_freq_tick for details)
> > + */
> > + scale = arch_scale_freq_capacity(cpu);
> > + freq = scale * arch_scale_freq_ref(cpu);
> > + freq >>= SCHED_CAPACITY_SHIFT;
> > +
> > + return freq;
> > +}
> > +
> > static void amu_fie_setup(const struct cpumask *cpus)
> > {
> > int cpu;
> > --
> > 2.25.1
> >
