On Wed, Mar 06, 2024 at 12:11:22AM +0800, Wayne Chang wrote:
> This commit resolves an issue in the tegra-xudc USB gadget driver that
> incorrectly fetched USB3 PHY instances. The problem stemmed from the
> assumption of a one-to-one correspondence between USB2 and USB3 PHY
> names and their association with physical USB ports in the device tree.
>
> Previously, the driver associated USB3 PHY names directly with the USB3
> instance number, leading to mismatches when mapping the physical USB
> ports. For instance, if using USB3-1 PHY, the driver expect the
> corresponding PHY name as 'usb3-1'. However, the physical USB ports in
> the device tree were designated as USB2-0 and USB3-0 as we only have
> one device controller, causing a misalignment.
>
> This commit rectifies the issue by adjusting the PHY naming logic.
> Now, the driver correctly correlates the USB2 and USB3 PHY instances,
> allowing the USB2-0 and USB3-1 PHYs to form a physical USB port pair
> while accurately reflecting their configuration in the device tree by
> naming them USB2-0 and USB3-0, respectively.
>
> The change ensures that the PHY and PHY names align appropriately,
> resolving the mismatch between physical USB ports and their associated
> names in the device tree.
>
> Fixes: b4e19931c98a ("usb: gadget: tegra-xudc: Support multiple device modes")
> Cc: stable@xxxxxxxxxxxxxxx
You mark patch 2/2 for stable, but not patch 1/2? That's not going to
work well, is it? :(
thanks,
greg k-h
