Re: [PATCH v1 10/14] serial: 8250_of: Switch to use uart_read_port_properties()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2/22/24 09:39, Florian Fainelli wrote:
On 2/22/24 08:47, Andy Shevchenko wrote:
On Thu, Feb 22, 2024 at 06:43:08PM +0200, Andy Shevchenko wrote:
On Thu, Feb 22, 2024 at 03:23:24PM +0200, Andy Shevchenko wrote:
On Thu, Feb 22, 2024 at 11:07:05AM +1030, Andrew Jeffery wrote:
On Wed, 2024-02-21 at 20:31 +0200, Andy Shevchenko wrote:
Since we have now a common helper to read port properties
use it instead of sparse home grown solution.

I did some brief testing of the series for the Aspeed machines under
qemu, building them on top of v6.8-rc5:

export ARCH=arm
export CROSS_COMPILE=arm-linux-gnueabihf-
make aspeed_g5_defconfig
make -j$(nproc)
qemu-system-arm -M rainier-bmc -nographic -no-reboot -kernel arch/arm/boot/zImage -dtb arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dtb -initrd ...

I got an oops during boot, which bisected to this change:

Thank you for prompt testing! I will look at it.

I found the issue, will be fixed in next version.

Whoever is going to test this series, the

-        port->iotype = use_defaults ? UPIO_MEM : port->iotype;
+        port->iotype = UPIO_MEM;

should be applied to uart_read_port_properties() implementation.


Thanks, on 8250_bcm7271.c with the above hunk applied, I did not spot any differences between the values returned by stty or a cat /sys/class/tty/ttyS0/* before or after, the console remained fully functional. I will see if I can run an additional test where I removed the DT's "clocks" property and confirm that the fall back to "clock-frequency" works.

Thanks Andy!

Also appears to work properly on a Raspberry Pi 4 with the console using the bcm2835-aux driver, will provide Tested-by tags on the next submission, thanks!
--
Florian

Attachment: smime.p7s
Description: S/MIME Cryptographic Signature


[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux