On 06-12-2023 21:06, Manivannan Sadhasivam wrote:
External email: Use caution opening links or attachments
On Wed, Feb 08, 2023 at 04:46:44PM +0530, Manikanta Maddireddy wrote:
Add PCIe port node under the PCIe controller-1 device tree node to support
PCIe WAKE# interrupt for WiFi.
Signed-off-by: Manikanta Maddireddy <mmaddireddy@xxxxxxxxxx>
---
Changes in v14:
New patch in the series to support PCIe WAKE# in NVIDIA Jetson AGX Orin.
.../dts/nvidia/tegra234-p3737-0000+p3701-0000.dts | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
index 8a9747855d6b..9c89be263141 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
@@ -2147,6 +2147,17 @@ pcie@14100000 {
phys = <&p2u_hsio_3>;
phy-names = "p2u-0";
+
+ pci@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA234_MAIN_GPIO(L, 2) IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "wakeup";
WAKE# should be part of the PCIe controller, not device. And the interrupt name
should be "wake".
- Mani
Hi,
Please refer to the discussion in below link, WAKE# is per PCI bridge.
https://patchwork.ozlabs.org/project/linux-pci/patch/20171226020806.32710-2-jeffy.chen@xxxxxxxxxxxxxx/
I carried wakeup name defined in previous version, but wake seems to be
sufficient.
Thanks,
Manikanta
+ };
};
pcie@14160000 {
--
2.25.1
--
மணிவண்ணன் சதாசிவம்
