For some devices the bootloader/firmware may set up the device in
bypass. Memory clients like display needs kernel to program SID after
resume because bootloader/firmware programs the SID of display device to
bypass. In order to make sure that kernel IOMMU mappings for these
devices work after resume, add SID override programming support for all
memory clients on memory controller resume.
This partially reverts 'commit ef86b2c2807f ("memory: tegra: Remove
clients SID override programming")'
Signed-off-by: Ashish Mhetre <amhetre@xxxxxxxxxx>
---
drivers/memory/tegra/tegra186.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/memory/tegra/tegra186.c b/drivers/memory/tegra/tegra186.c
index 533f85a4b2bd..bd8cecc3cde2 100644
--- a/drivers/memory/tegra/tegra186.c
+++ b/drivers/memory/tegra/tegra186.c
@@ -68,6 +68,19 @@ static void tegra186_mc_remove(struct tegra_mc *mc)
of_platform_depopulate(mc->dev);
}
+static int tegra186_mc_resume(struct tegra_mc *mc)
+{
+ unsigned int i;
+
+ for (i = 0; i < mc->soc->num_clients; i++) {
+ const struct tegra_mc_client *client = &mc->soc->clients[i];
+
+ tegra186_mc_client_sid_override(mc, client, client->sid);
+ }
+
+ return 0;
+}
+
#if IS_ENABLED(CONFIG_IOMMU_API)
static void tegra186_mc_client_sid_override(struct tegra_mc *mc,
const struct tegra_mc_client *client,
@@ -139,6 +152,7 @@ static int tegra186_mc_probe_device(struct tegra_mc *mc, struct device *dev)
const struct tegra_mc_ops tegra186_mc_ops = {
.probe = tegra186_mc_probe,
.remove = tegra186_mc_remove,
+ .resume = tegra186_mc_resume,
.probe_device = tegra186_mc_probe_device,
.handle_irq = tegra30_mc_handle_irq,
};
--
2.17.1
