[PATCH v2 1/3] usb: chipidea: Fix DMA overwrite for Tegra

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Tegra USB controllers seem to issue DMA in full 32-bit words only and thus
may overwrite unevenly-sized buffers.  One such occurrence is detected by
SLUB when receiving a reply to a 1-byte buffer (below).  Fix this by
allocating a bounce buffer also for buffers with sizes not a multiple of 4.

=============================================================================
BUG kmalloc-64 (Tainted: G    B             ): kmalloc Redzone overwritten
-----------------------------------------------------------------------------

0x8555cd02-0x8555cd03 @offset=3330. First byte 0x0 instead of 0xcc
Allocated in usb_get_status+0x2b/0xac age=1 cpu=3 pid=41
 __kmem_cache_alloc_node+0x12f/0x1e4
 __kmalloc+0x33/0x8c
 usb_get_status+0x2b/0xac
 hub_probe+0x5e9/0xcec
 usb_probe_interface+0xbf/0x21c
 really_probe+0xa5/0x2c4
 __driver_probe_device+0x75/0x174
 driver_probe_device+0x31/0x94
 __device_attach_driver+0x65/0xc0
 bus_for_each_drv+0x4b/0x74
 __device_attach+0x69/0x120
 bus_probe_device+0x65/0x6c
 device_add+0x48b/0x5f8
 usb_set_configuration+0x37b/0x6b4
 usb_generic_driver_probe+0x37/0x68
 usb_probe_device+0x35/0xb4
Slab 0xbf622b80 objects=21 used=18 fp=0x8555cdc0 flags=0x800(slab|zone=0)
Object 0x8555cd00 @offset=3328 fp=0x00000000

Redzone  8555ccc0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
Redzone  8555ccd0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
Redzone  8555cce0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
Redzone  8555ccf0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
Object   8555cd00: 01 00 00 00 cc cc cc cc cc cc cc cc cc cc cc cc  ................
Object   8555cd10: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
Object   8555cd20: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
Object   8555cd30: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
Redzone  8555cd40: cc cc cc cc                                      ....
Padding  8555cd74: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a              ZZZZZZZZZZZZ
CPU: 3 PID: 41 Comm: kworker/3:1 Tainted: G    B              6.6.0-rc1mq-00118-g59786f827ea1 #1115
Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
Workqueue: usb_hub_wq hub_event
[<8010ca28>] (unwind_backtrace) from [<801090a5>] (show_stack+0x11/0x14)
[<801090a5>] (show_stack) from [<805da2fb>] (dump_stack_lvl+0x4d/0x7c)
[<805da2fb>] (dump_stack_lvl) from [<8026464f>] (check_bytes_and_report+0xb3/0xe4)
[<8026464f>] (check_bytes_and_report) from [<802648e1>] (check_object+0x261/0x290)
[<802648e1>] (check_object) from [<802671b1>] (free_to_partial_list+0x105/0x3f8)
[<802671b1>] (free_to_partial_list) from [<80268613>] (__kmem_cache_free+0x103/0x128)
[<80268613>] (__kmem_cache_free) from [<80425a67>] (usb_get_status+0x73/0xac)
[<80425a67>] (usb_get_status) from [<80421b31>] (hub_probe+0x5e9/0xcec)
[<80421b31>] (hub_probe) from [<80428bbb>] (usb_probe_interface+0xbf/0x21c)
[<80428bbb>] (usb_probe_interface) from [<803ee13d>] (really_probe+0xa5/0x2c4)
[<803ee13d>] (really_probe) from [<803ee3d1>] (__driver_probe_device+0x75/0x174)
[<803ee3d1>] (__driver_probe_device) from [<803ee501>] (driver_probe_device+0x31/0x94)
usb 1-1: device descriptor read/8, error -71

Fixes: fc53d5279094 ("usb: chipidea: tegra: Support host mode")
Signed-off-by: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
---
 drivers/usb/chipidea/host.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index 08af26b762a2..abddd39d1ff1 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -411,12 +411,13 @@ static int ci_hdrc_alloc_dma_aligned_buffer(struct urb *urb, gfp_t mem_flags)
 	const unsigned int ci_hdrc_usb_dma_align = 32;
 	size_t kmalloc_size;
 
-	if (urb->num_sgs || urb->sg || urb->transfer_buffer_length == 0 ||
-	    !((uintptr_t)urb->transfer_buffer & (ci_hdrc_usb_dma_align - 1)))
+	if (urb->num_sgs || urb->sg || urb->transfer_buffer_length == 0)
+		return 0;
+	if (!((uintptr_t)urb->transfer_buffer & (ci_hdrc_usb_dma_align - 1)) && !(urb->transfer_buffer_length & 3))
 		return 0;
 
 	/* Allocate a buffer with enough padding for alignment */
-	kmalloc_size = urb->transfer_buffer_length +
+	kmalloc_size = ALIGN(urb->transfer_buffer_length, 4) +
 		       sizeof(struct ci_hdrc_dma_aligned_buffer) +
 		       ci_hdrc_usb_dma_align - 1;
 
-- 
2.39.2




[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux