On 29-08-23, 14:13, Sumit Gupta wrote:
> Fix the warning due to missing dev_pm_opp_put() call and hence
> wrong refcount value. This causes below warning message when
> trying to remove the module.
>
> Call trace:
> dev_pm_opp_put_opp_table+0x154/0x15c
> dev_pm_opp_remove_table+0x34/0xa0
> _dev_pm_opp_cpumask_remove_table+0x7c/0xbc
> dev_pm_opp_of_cpumask_remove_table+0x10/0x18
> tegra194_cpufreq_exit+0x24/0x34 [tegra194_cpufreq]
> cpufreq_remove_dev+0xa8/0xf8
> subsys_interface_unregister+0x90/0xe8
> cpufreq_unregister_driver+0x54/0x9c
> tegra194_cpufreq_remove+0x18/0x2c [tegra194_cpufreq]
> platform_remove+0x24/0x74
> device_remove+0x48/0x78
> device_release_driver_internal+0xc8/0x160
> driver_detach+0x4c/0x90
> bus_remove_driver+0x68/0xb8
> driver_unregister+0x2c/0x58
> platform_driver_unregister+0x10/0x18
> tegra194_ccplex_driver_exit+0x14/0x1e0 [tegra194_cpufreq]
> __arm64_sys_delete_module+0x184/0x270
>
> Fixes: f41e1442ac5b ("cpufreq: tegra194: add OPP support and set bandwidth")
> Signed-off-by: Sumit Gupta <sumitg@xxxxxxxxxx>
> ---
> drivers/cpufreq/tegra194-cpufreq.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/cpufreq/tegra194-cpufreq.c b/drivers/cpufreq/tegra194-cpufreq.c
> index 88ef5e57ccd0..9d7e1d58f6e5 100644
> --- a/drivers/cpufreq/tegra194-cpufreq.c
> +++ b/drivers/cpufreq/tegra194-cpufreq.c
> @@ -450,6 +450,7 @@ static int tegra_cpufreq_init_cpufreq_table(struct cpufreq_policy *policy,
> if (IS_ERR(opp))
> continue;
>
> + dev_pm_opp_put(opp);
> ret = dev_pm_opp_enable(cpu_dev, pos->frequency * KHZ);
> if (ret < 0)
> return ret;
Applied. Thanks.
--
viresh
