On 16/08/2023 18:30, Thierry Reding wrote:
On Mon, Aug 07, 2023 at 02:33:00PM +0100, Diogo Ivo wrote:
Hello,
These patches add support for the JDI LPM102A188A display panel,
found in the Google Pixel C.
Patch 1 adds the DT bindings for the panel.
Patch 2 adds the panel driver, which is based on the downstream
kernel driver published by Google and developed by Sean Paul.
Patches 3-5 add DT nodes for the regulator, backlight controller and
display panel.
The first version of this patch series can be found at:
https://lore.kernel.org/all/20220929170502.1034040-1-diogo.ivo@xxxxxxxxxxxxxxxxxx/
The first submission of v2 can be found at:
https://lore.kernel.org/all/20221025153746.101278-1-diogo.ivo@xxxxxxxxxxxxxxxxxx/
Changes in v2:
- Patch 1: remove touchscreen reset gpio property
- Patch 2: clear register based on its value rather than a DT property
- Patch 3: tune backlight delay values
- Patch 4: add generic node names, remove underscores
Changes in v3:
- Patch 1: add Reviewed-by
- Patch 2: fix error handling, remove enabled/prepared booleans, add
dc/dc setting
- Patches 3-5: Split previous patch 3 into three different patches,
each adding a separate node
- removed previous patch 2 pertaining to Tegra DSI reset as it was upstreamed
Diogo Ivo (5):
dt-bindings: display: Add bindings for JDI LPM102A188A
drm/panel: Add driver for JDI LPM102A188A
arm64: dts: smaug: Add DSI/CSI regulator
arm64: dts: smaug: Add backlight node
arm64: dts: smaug: Add display panel node
I've picked up patches 3-5 into the Tegra tree and I assume the other
two will go in through drm-misc?
Sure, done !
Thierry
