Re: [PATCH v3 46/65] clk: at91: smd: Switch to determine_rate

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 04.04.2023 13:11, Maxime Ripard wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> The Atmel SAM9x5 SMD clocks implements a mux with a set_parent
> hook, but doesn't provide a determine_rate implementation.
> 
> This is a bit odd, since set_parent() is there to, as its name implies,
> change the parent of a clock. However, the most likely candidate to
> trigger that parent change is a call to clk_set_rate(), with
> determine_rate() figuring out which parent is the best suited for a
> given rate.
> 
> The other trigger would be a call to clk_set_parent(), but it's far less
> used, and it doesn't look like there's any obvious user for that clock.
> 
> So, the set_parent hook is effectively unused, possibly because of an
> oversight. However, it could also be an explicit decision by the
> original author to avoid any reparenting but through an explicit call to
> clk_set_parent().
> 
> The driver does implement round_rate() though, which means that we can
> change the rate of the clock, but we will never get to change the
> parent.
> 
> However, It's hard to tell whether it's been done on purpose or not.
> 
> Since we'll start mandating a determine_rate() implementation, let's
> convert the round_rate() implementation to a determine_rate(), which
> will also make the current behavior explicit. And if it was an
> oversight, the clock behaviour can be adjusted later on.
> 
> Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>

Reviewed-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>

Tested-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>

> ---
>  drivers/clk/at91/clk-smd.c | 29 +++++++++++++++++------------
>  1 file changed, 17 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/clk/at91/clk-smd.c b/drivers/clk/at91/clk-smd.c
> index 160378438f1b..09c649c8598e 100644
> --- a/drivers/clk/at91/clk-smd.c
> +++ b/drivers/clk/at91/clk-smd.c
> @@ -36,26 +36,31 @@ static unsigned long at91sam9x5_clk_smd_recalc_rate(struct clk_hw *hw,
>         return parent_rate / (smddiv + 1);
>  }
> 
> -static long at91sam9x5_clk_smd_round_rate(struct clk_hw *hw, unsigned long rate,
> -                                         unsigned long *parent_rate)
> +static int at91sam9x5_clk_smd_determine_rate(struct clk_hw *hw,
> +                                            struct clk_rate_request *req)
>  {
>         unsigned long div;
>         unsigned long bestrate;
>         unsigned long tmp;
> 
> -       if (rate >= *parent_rate)
> -               return *parent_rate;
> +       if (req->rate >= req->best_parent_rate) {
> +               req->rate = req->best_parent_rate;
> +               return 0;
> +       }
> 
> -       div = *parent_rate / rate;
> -       if (div > SMD_MAX_DIV)
> -               return *parent_rate / (SMD_MAX_DIV + 1);
> +       div = req->best_parent_rate / req->rate;
> +       if (div > SMD_MAX_DIV) {
> +               req->rate = req->best_parent_rate / (SMD_MAX_DIV + 1);
> +               return 0;
> +       }
> 
> -       bestrate = *parent_rate / div;
> -       tmp = *parent_rate / (div + 1);
> -       if (bestrate - rate > rate - tmp)
> +       bestrate = req->best_parent_rate / div;
> +       tmp = req->best_parent_rate / (div + 1);
> +       if (bestrate - req->rate > req->rate - tmp)
>                 bestrate = tmp;
> 
> -       return bestrate;
> +       req->rate = bestrate;
> +       return 0;
>  }
> 
>  static int at91sam9x5_clk_smd_set_parent(struct clk_hw *hw, u8 index)
> @@ -98,7 +103,7 @@ static int at91sam9x5_clk_smd_set_rate(struct clk_hw *hw, unsigned long rate,
> 
>  static const struct clk_ops at91sam9x5_smd_ops = {
>         .recalc_rate = at91sam9x5_clk_smd_recalc_rate,
> -       .round_rate = at91sam9x5_clk_smd_round_rate,
> +       .determine_rate = at91sam9x5_clk_smd_determine_rate,
>         .get_parent = at91sam9x5_clk_smd_get_parent,
>         .set_parent = at91sam9x5_clk_smd_set_parent,
>         .set_rate = at91sam9x5_clk_smd_set_rate,
> 
> --
> 2.39.2
> 





[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux