On 11/05/2023 15:20, Peter De Schrijver wrote:
> Add memory-region property to the tegra186-bpmp binding to support
> DRAM MRQ GSCs.
Use subject prefixes matching the subsystem (which you can get for
example with `git log --oneline -- DIRECTORY_OR_FILE` on the directory
your patch is touching).
>
> Co-developed-by: Stefan Kristiansson <stefank@xxxxxxxxxx>
> Signed-off-by: Stefan Kristiansson <stefank@xxxxxxxxxx>
> Signed-off-by: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
> ---
> .../firmware/nvidia,tegra186-bpmp.yaml | 37 +++++++++++++++++--
> 1 file changed, 34 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.yaml b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.yaml
> index 833c07f1685c..f3e02c9d090d 100644
> --- a/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.yaml
> +++ b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.yaml
> @@ -57,8 +57,11 @@ description: |
> "#address-cells" or "#size-cells" property.
>
> The shared memory area for the IPC TX and RX between CPU and BPMP are
> - predefined and work on top of sysram, which is an SRAM inside the
> - chip. See ".../sram/sram.yaml" for the bindings.
> + predefined and work on top of either sysram, which is an SRAM inside the
> + chip, or in normal SDRAM.
> + See ".../sram/sram.yaml" for the bindings for the SRAM case.
> + See "../reserved-memory/nvidia,tegra264-bpmp-shmem.yaml" for bindings for
> + the SDRAM case.
>
> properties:
> compatible:
> @@ -81,6 +84,11 @@ properties:
> minItems: 2
> maxItems: 2
>
> + memory-region:
> + description: phandle to reserved memory region used for IPC between
> + CPU-NS and BPMP.
> + maxItems: 1
> +
> "#clock-cells":
> const: 1
>
> @@ -115,10 +123,15 @@ properties:
>
> additionalProperties: false
>
> +oneOf:
> + - required:
> + - memory-region
> + - required:
> + - shmem
> +
> required:
> - compatible
> - mboxes
> - - shmem
> - "#clock-cells"
> - "#power-domain-cells"
> - "#reset-cells"
> @@ -184,3 +197,21 @@ examples:
> #thermal-sensor-cells = <1>;
> };
> };
> +
> + - |
> + #include <dt-bindings/mailbox/tegra186-hsp.h>
> +
> + bpmp {
> + compatible = "nvidia,tegra186-bpmp";
> + interconnects = <&mc TEGRA186_MEMORY_CLIENT_BPMPR &emc>,
> + <&mc TEGRA186_MEMORY_CLIENT_BPMPW &emc>,
> + <&mc TEGRA186_MEMORY_CLIENT_BPMPDMAR &emc>,
> + <&mc TEGRA186_MEMORY_CLIENT_BPMPDMAW &emc>;
> + interconnect-names = "read", "write", "dma-mem", "dma-write";
> + mboxes = <&hsp_top1 TEGRA_HSP_MBOX_TYPE_DB
> + TEGRA_HSP_DB_MASTER_BPMP>;
> + memory-region = <&dram_cpu_bpmp_mail>;
I am not sure if difference with one property justifies new example...
Best regards,
Krzysztof
