On Wed, Apr 19, 2023 at 10:53:42PM +0100, Jon Hunter wrote:
> Hi Greg,
>
> On 06/04/2023 13:00, Thierry Reding wrote:
> > On Thu, Apr 06, 2023 at 10:35:15AM +0100, Jon Hunter wrote:
> > >
> > > On 06/04/2023 09:05, Thierry Reding wrote:
> > > > On Wed, Apr 05, 2023 at 07:18:53PM +0100, Jon Hunter wrote:
> > > > > Commit ac82b56bda5f ("usb: gadget: tegra-xudc: Add vbus_draw support")
> > > > > populated the vbus_draw callback for the Tegra XUDC driver. The function
> > > > > tegra_xudc_gadget_vbus_draw(), that was added by this commit, assumes
> > > > > that the pointer 'curr_usbphy' has been initialised, which is not always
> > > > > the case because this is only initialised when the USB role is updated.
> > > > > Fix this crash, by checking that the 'curr_usbphy' is valid before
> > > > > dereferencing.
> > > > >
> > > > > Fixes: ac82b56bda5f ("usb: gadget: tegra-xudc: Add vbus_draw support")
> > > > > Signed-off-by: Jon Hunter <jonathanh@xxxxxxxxxx>
> > > > > ---
> > > > > drivers/usb/gadget/udc/tegra-xudc.c | 2 +-
> > > > > 1 file changed, 1 insertion(+), 1 deletion(-)
> > > > >
> > > > > diff --git a/drivers/usb/gadget/udc/tegra-xudc.c b/drivers/usb/gadget/udc/tegra-xudc.c
> > > > > index 2b71b33725f1..5bccd64847ff 100644
> > > > > --- a/drivers/usb/gadget/udc/tegra-xudc.c
> > > > > +++ b/drivers/usb/gadget/udc/tegra-xudc.c
> > > > > @@ -2167,7 +2167,7 @@ static int tegra_xudc_gadget_vbus_draw(struct usb_gadget *gadget,
> > > > > dev_dbg(xudc->dev, "%s: %u mA\n", __func__, m_a);
> > > > > - if (xudc->curr_usbphy->chg_type == SDP_TYPE)
> > > > > + if (xudc->curr_usbphy && xudc->curr_usbphy->chg_type == SDP_TYPE)
> > > > > ret = usb_phy_set_power(xudc->curr_usbphy, m_a);
> > > > > return ret;
> > > >
> > > > Looking at tegra_xudc_probe(), that calls tegra_xudc_update_data_role()
> > > > for all PHYs, so shouldn't that be enough to get curr_usbphy set? Or is
> > > > there perhaps a race between ->vbus_draw() and the data role update? Is
> > > > ->vbus_draw() perhaps called as part of usb_add_gadget_udc()? Should we
> > > > reorder those to make sure the role is properly updated before the
> > > > gadget is registered?
> > >
> > > Yes it does call it, but it still does not set the curr_usbphy. If you look
> > > at the function it may not set it.
> > >
> > > In the backtrace I saw, which was happening on reboot, it was in the
> > > unregister of the gadget ...
> > >
> > > [ 1102.047896] Call trace:
> > > [ 1102.050402] 0xffffde9fd18c0878
> > > [ 1102.053602] usb_gadget_vbus_draw+0x28/0x50
> > > [ 1102.057879] composite_disconnect+0x1c/0x40 [libcomposite]
> > > [ 1102.063509] usb_get_function_instance+0x1808/0x27b0 [libcomposite]
> > > [ 1102.069935] usb_gadget_disconnect+0x64/0xa0
> > > [ 1102.074304] usb_gadget_remove_driver+0x2c/0xc0
> > > [ 1102.078942] usb_gadget_unregister_driver+0x70/0xf0
> > > [ 1102.083927] usb_get_function_instance+0x2774/0x27b0 [libcomposite]
> > > [ 1102.090339] unregister_gadget_item+0x280/0x470 [libcomposite]
> > > [ 1102.096314] configfs_write_iter+0xc4/0x120
> > > [ 1102.100609] new_sync_write+0xe8/0x190
> > > [ 1102.104461] vfs_write+0x234/0x380
> > > [ 1102.107938] ksys_write+0x6c/0x100
> > > [ 1102.111417] __arm64_sys_write+0x1c/0x30
> > > [ 1102.115427] invoke_syscall.constprop.0+0x4c/0xe0
> > > [ 1102.120245] do_el0_svc+0x50/0x150
> > > [ 1102.123723] el0_svc+0x28/0xc0
> > > [ 1102.126854] el0t_64_sync_handler+0xb0/0xc0
> > > [ 1102.131138] el0t_64_sync+0x1a0/0x1a4
> > > [ 1102.134889] Code: 910003fd a90153f3 f94ce413 f100027f (b9409a60)
> > > [ 1102.141139] ---[ end trace cdf6612bd43fcbf2 ]---
> >
> > Alright. There are a lot of cases where we can run into this and it all
> > looks a little complicated, so I think it would be good to unwind this
> > at some point. But I can't think of an easy way to do that, so for a fix
> > this looks good:
> >
> > Reviewed-by: Thierry Reding <treding@xxxxxxxxxx>
>
> OK for pick this up v6.4?
It's in my queue, which is big, I'm at a conference this week but will
try to get to it today on the train ride...
greg k-h
