[PATCH v3 10/65] clk: k210: pll: Add a determine_rate hook

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The K210 PLL clock implements a mux with a set_parent hook, but
doesn't provide a determine_rate implementation.

This is a bit odd, since set_parent() is there to, as its name implies,
change the parent of a clock. However, the most likely candidate to
trigger that parent change is a call to clk_set_rate(), with
determine_rate() figuring out which parent is the best suited for a
given rate.

The other trigger would be a call to clk_set_parent(), but it's far less
used, and it doesn't look like there's any obvious user for that clock.

So, the set_parent hook is effectively unused, possibly because of an
oversight. However, it could also be an explicit decision by the
original author to avoid any reparenting but through an explicit call to
clk_set_parent().

The latter case would be equivalent to setting the flag
CLK_SET_RATE_NO_REPARENT, together with setting our determine_rate hook
to __clk_mux_determine_rate(). Indeed, if no determine_rate
implementation is provided, clk_round_rate() (through
clk_core_round_rate_nolock()) will call itself on the parent if
CLK_SET_RATE_PARENT is set, and will not change the clock rate
otherwise. __clk_mux_determine_rate() has the exact same behavior when
CLK_SET_RATE_NO_REPARENT is set.

And if it was an oversight, then we are at least explicit about our
behavior now and it can be further refined down the line.

Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>
---
 drivers/clk/clk-k210.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/clk-k210.c b/drivers/clk/clk-k210.c
index 4eed667eddaf..a96ab8611e1f 100644
--- a/drivers/clk/clk-k210.c
+++ b/drivers/clk/clk-k210.c
@@ -537,6 +537,7 @@ static const struct clk_ops k210_pll2_ops = {
 	.disable	= k210_pll_disable,
 	.is_enabled	= k210_pll_is_enabled,
 	.recalc_rate	= k210_pll_get_rate,
+	.determine_rate = __clk_mux_determine_rate,
 	.set_parent	= k210_pll2_set_parent,
 	.get_parent	= k210_pll2_get_parent,
 };
@@ -544,7 +545,8 @@ static const struct clk_ops k210_pll2_ops = {
 static int __init k210_register_pll(struct device_node *np,
 				    struct k210_sysclk *ksc,
 				    enum k210_pll_id pllid, const char *name,
-				    int num_parents, const struct clk_ops *ops)
+				    int num_parents, const struct clk_ops *ops,
+				    unsigned long flags)
 {
 	struct k210_pll *pll = &ksc->plls[pllid];
 	struct clk_init_data init = {};
@@ -558,6 +560,7 @@ static int __init k210_register_pll(struct device_node *np,
 	init.parent_data = parent_data;
 	init.num_parents = num_parents;
 	init.ops = ops;
+	init.flags = flags;
 
 	pll->hw.init = &init;
 	pll->ksc = ksc;
@@ -574,19 +577,20 @@ static int __init k210_register_plls(struct device_node *np,
 		k210_init_pll(ksc->regs, i, &ksc->plls[i]);
 
 	/* PLL0 and PLL1 only have IN0 as parent */
-	ret = k210_register_pll(np, ksc, K210_PLL0, "pll0", 1, &k210_pll_ops);
+	ret = k210_register_pll(np, ksc, K210_PLL0, "pll0", 1, &k210_pll_ops, 0);
 	if (ret) {
 		pr_err("%pOFP: register PLL0 failed\n", np);
 		return ret;
 	}
-	ret = k210_register_pll(np, ksc, K210_PLL1, "pll1", 1, &k210_pll_ops);
+	ret = k210_register_pll(np, ksc, K210_PLL1, "pll1", 1, &k210_pll_ops, 0);
 	if (ret) {
 		pr_err("%pOFP: register PLL1 failed\n", np);
 		return ret;
 	}
 
 	/* PLL2 has IN0, PLL0 and PLL1 as parents */
-	ret = k210_register_pll(np, ksc, K210_PLL2, "pll2", 3, &k210_pll2_ops);
+	ret = k210_register_pll(np, ksc, K210_PLL2, "pll2", 3, &k210_pll2_ops,
+				CLK_SET_RATE_NO_REPARENT);
 	if (ret) {
 		pr_err("%pOFP: register PLL2 failed\n", np);
 		return ret;

-- 
2.39.2




[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux